Re: [alsa-devel] 2.6.26.[6|7]-rt11, alsa rawmidi, seq hang

From: Fernando Lopez-Lezcano
Date: Fri Nov 07 2008 - 19:49:41 EST


On Fri, 2008-11-07 at 15:12 -0800, Fernando Lopez-Lezcano wrote:
> On Fri, 2008-11-07 at 10:12 -0800, Fernando Lopez-Lezcano wrote:
> > On Fri, 2008-11-07 at 10:12 +0100, Clemens Ladisch wrote:
> > > Fernando Lopez-Lezcano wrote:
> > > > I'm seeing a realtime patch related hard hang in the kernel alsa
> > > > subsystem (MIDI input/output). In a nutshell:
> > > >
> > > > - alsa rawmidi works (ie: "rawmidi -v -i hw:0" outputs a stream of
> > > > messages when pointed to a midi capable card that has an external
> > > > keyboard connected).
> > > >
> > > > - the alsa sequencer interface works (ie: aplaymidi connected to
> > > > aseqdump transfers data just fine).
> > > >
> > > > - BOTH combined do NOT work (ie: use aconnect to connect the port that
> > > > corresponds to the external midi interface to aseqdump: aseqdump hangs
> > > > forever after transferring the first message and the only way out is a
> > > > reboot).
> > >
> > > Please try the snd-virmidi driver, then we'd have a test case that does
> > > not require MIDI hardware.
> > >
> > > > ... including the output of a "echo t >/proc/sysrq-trigger" that
> > > > should show where aseqdump currently hangs (or so I think).
> > >
> > > It hangs in tasklet_kill(), which gets called while it tries to close
> > > the rawmidi port.
> > >
> > > The rawmidi framework uses this tasklet to notify the sequencer that new
> > > MIDI data is available. The handler function is
> > > snd_rawmidi_input_event_tasklet() in sound/core/rawmidi.c; the sequencer
> > > callback that gets called from there is snd_midi_input_event() in
> > > core/seq/seq_midi.c.
> > >
> > > You say that the first event gets delivered, so it might be possible
> > > that the tasklet never finishes executing. Please check whether the
> > > call to snd_seq_kernel_client_dispatch() in snd_midi_input_event()
> > > ever returns.
> >
> > I added a printk before and after the call, it looks like it gets called
> > and it returns (but only _once_... aseqdump hangs in an unkillable state
> > as before).
>
> Just in case, the tasklet keeps getting called as long as midi bytes are
> received. So the tasklet runs once, snd_midi_input_event gets called
> once and the tasklet keeps running again and again, but nobody runs
> snd_midi_input_event. Who should?

I normally use rtirq to tune realtime priorities for realtime kernel
processes, as I looked around and noticed tasklets seem to be related to
(or are) software interrupts and those have priorities, so I disabled
rtirq and rebooted (which leaves the default priority of 50 for all
realtime kernel processes).

Now I get __two__ midi bytes instead of one (active sensing messages
from the keyboard) and the whole thing stalls as before.
??
So is this a priority inversion problem?
-- Fernando


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/