[PATCH 1/14] ALSA: cs5535audio: OLPC analog input support

From: Andres Salomon
Date: Thu Nov 06 2008 - 16:43:54 EST


From: Jaya Kumar <jayakumar.lkml@xxxxxxxxx>

This is a 2nd cut at adding support for OLPC analog input.

Signed-off-by: Jaya Kumar <jayakumar.lkml@xxxxxxxxx>
Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxx>
---
sound/pci/cs5535audio/Makefile | 4 +
sound/pci/cs5535audio/cs5535audio.c | 6 ++
sound/pci/cs5535audio/cs5535audio.h | 9 +++
sound/pci/cs5535audio/cs5535audio_olpc.c | 113 ++++++++++++++++++++++++++++++
4 files changed, 132 insertions(+), 0 deletions(-)
create mode 100644 sound/pci/cs5535audio/cs5535audio_olpc.c

diff --git a/sound/pci/cs5535audio/Makefile b/sound/pci/cs5535audio/Makefile
index bb3d57e..3e41fd3 100644
--- a/sound/pci/cs5535audio/Makefile
+++ b/sound/pci/cs5535audio/Makefile
@@ -5,5 +5,9 @@
snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o
snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o

+ifdef CONFIG_OLPC
+snd-cs5535audio-objs += cs5535audio_olpc.o
+endif
+
# Toplevel Module Dependency
obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 6c886ed..cddfa54 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -171,6 +171,12 @@ static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)

snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);

+ /* olpc_quirks is dummied out if not olpc */
+ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
+ snd_printk(KERN_ERR "olpc quirks failed\n");
+ return err;
+ }
+
return 0;
}

diff --git a/sound/pci/cs5535audio/cs5535audio.h b/sound/pci/cs5535audio/cs5535audio.h
index 1aa1e2b..c67e62f 100644
--- a/sound/pci/cs5535audio/cs5535audio.h
+++ b/sound/pci/cs5535audio/cs5535audio.h
@@ -92,6 +92,9 @@ struct cs5535audio {
struct snd_pcm_substream *playback_substream;
struct snd_pcm_substream *capture_substream;
struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
+#ifdef CONFIG_OLPC
+ int ec_analog_input_mode;
+#endif
};

#ifdef CONFIG_PM
@@ -99,6 +102,12 @@ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
int snd_cs5535audio_resume(struct pci_dev *pci);
#endif

+#ifdef CONFIG_OLPC
+int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97);
+#else
+#define olpc_quirks(arg,arg2) (0)
+#endif
+
int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);

#endif /* __SOUND_CS5535AUDIO_H */
diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c
new file mode 100644
index 0000000..6d3ccb9
--- /dev/null
+++ b/sound/pci/cs5535audio/cs5535audio_olpc.c
@@ -0,0 +1,113 @@
+#include <linux/olpc.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/ac97_codec.h>
+#include "cs5535audio.h"
+
+/* OLPC has an additional feature on top of regular AD1888 codec
+features. This is support for an analog input mode. This is a
+2 step process. First, to turn off the AD1888 codec bias voltage
+and high pass filter. Second, to tell the embedded controller to
+reroute from a capacitive trace to a direct trace using an analog
+switch. The *_ec()s are what talk to that controller */
+
+static int snd_cs5535audio_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+#define AD1888_VREFOUT_EN_BIT (1 << 2)
+#define AD1888_HPF_EN_BIT (1 << 12)
+static int snd_cs5535audio_ctl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
+ u16 reg1, reg2;
+
+ /* if either AD1888 VRef Bias and High Pass Filter are enabled
+ or the EC is not in analog mode then flag as not in analog mode.
+ No EC command to read current analog state so we cache that. */
+ reg1 = snd_ac97_read(cs5535au->ac97, AC97_AD_MISC);
+ reg2 = snd_ac97_read(cs5535au->ac97, AC97_AD_TEST2);
+
+ if ((reg1 & AD1888_VREFOUT_EN_BIT) && (reg2 & AD1888_HPF_EN_BIT) &&
+ cs5535au->ec_analog_input_mode)
+ ucontrol->value.integer.value[0] = 1;
+ else
+ ucontrol->value.integer.value[0] = 0;
+
+ return 0;
+}
+
+static int snd_cs5535audio_ctl_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int err;
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
+ u8 value;
+ struct snd_ac97 *ac97 = cs5535au->ac97;
+
+ /* value is 1 if analog input is desired */
+ value = ucontrol->value.integer.value[0];
+
+ /* use ec mode as flag to determine if any change needed */
+ if (cs5535au->ec_analog_input_mode == value)
+ return 0;
+
+ /* sets High Z on VREF Bias if 1 */
+ if (value)
+ err = snd_ac97_update_bits(ac97, AC97_AD_MISC,
+ AD1888_VREFOUT_EN_BIT, AD1888_VREFOUT_EN_BIT);
+ else
+ err = snd_ac97_update_bits(ac97, AC97_AD_MISC,
+ AD1888_VREFOUT_EN_BIT, 0);
+ if (err < 0)
+ snd_printk(KERN_ERR "Error updating AD_MISC %d\n", err);
+
+ /* turns off High Pass Filter if 1 */
+ if (value)
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ AD1888_HPF_EN_BIT, AD1888_HPF_EN_BIT);
+ else
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ AD1888_HPF_EN_BIT, 0);
+ if (err < 0)
+ snd_printk(KERN_ERR "Error updating AD_TEST2 %d\n", err);
+
+ if (value)
+ err = write_ec_command(0x01); /* activate MIC_AC_OFF */
+ else
+ err = write_ec_command(0x02); /* deactivates MIC_AC_OFF */
+
+ if (err < 0)
+ snd_printk(KERN_ERR "Error talking to EC %d\n", err);
+
+ cs5535au->ec_analog_input_mode = value;
+
+ return 1;
+}
+
+static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog Input Switch",
+ .info = snd_cs5535audio_ctl_info,
+ .get = snd_cs5535audio_ctl_get,
+ .put = snd_cs5535audio_ctl_put,
+ .private_value = 0
+};
+
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+ /* setup callback for mixer control that does analog input mode */
+ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
+ ac97->private_data));
+}
+
--
1.5.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/