Re: [BUG REPORT!!!] [PATCH 19/49] pcmcia: remove remainingin-kernel pcmcia_get_configuration_info() users

[Komuro]

Dear Dominik


The reason of this bug is link->io is not copied
to the slave serial_cs device.

My patch below fix this problem.

--- ds.c.orig   2008-11-01 08:59:13.000000000 +0900
+++ ds.c        2008-11-02 17:05:44.000000000 +0900
@@ -668,6 +668,7 @@ struct pcmcia_device * pcmcia_device_add
         list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list)
                 if (p_dev->func == tmp_dev->func) {
                        p_dev->function_config = tmp_dev->function_config;
+                       p_dev->io = tmp_dev->io;
                        kref_get(&p_dev->function_config->ref);
                }



Best Regards
Komuro



> Dear Dominik
> 
> Unfortunately, your path "[PATCH 19/49] pcmcia: remove remaining in-kernel
> pcmcia_get_configuration_info() users"
> broke the "serial_cs" and other drivers.
> 
> You replace "config->BasePort2" to "link->io.BasePort2" at serial_cs. 
> 
> But link->io.BasePort2, link->io.NumPorts2(etc) 
> does not contain correct value (it is zero).
> 
> Please fix this problem (or reveart the patch).
> 
> 
> Best Regards
> Komuro
> 
> Here is your patch.
> >--- a/drivers/serial/serial_cs.c
> >+++ b/drivers/serial/serial_cs.c
> >@@ -488,23 +488,23 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
> > static int simple_config(struct pcmcia_device *link)
> > {
> > 	struct serial_info *info = link->priv;
> >-	config_info_t config;
> >-	int i, try;
> >+	int i = -ENODEV, try;
> > 
> > 	/* If the card is already configured, look up the port and irq */
> >-	i = pcmcia_get_configuration_info(link, &config);
> >-	if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
> >+	if (link->function_config) {
> > 		unsigned int port = 0;
> >-		if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
> >-			port = config.BasePort2;
> >+		if ((link->io.BasePort2 != 0) &&
> >+		    (link->io.NumPorts2 == 8)) {
> >+			port = link->io.BasePort2;
> > 			info->slave = 1;
> > 		} else if ((info->manfid == MANFID_OSITECH) &&
> >-			   (config.NumPorts1 == 0x40)) {
> >-			port = config.BasePort1 + 0x28;
> >+			   (link->io.NumPorts1 == 0x40)) {
> >+			port = link->io.BasePort1 + 0x28;
> > 			info->slave = 1;
> > 		}
> > 		if (info->slave) {
> >-			return setup_serial(link, info, port, config.AssignedIRQ);
> >+			return setup_serial(link, info, port,
> >+					    link->irq.AssignedIRQ);
>  		}
>  	}
> 
> 
> 
> 
> _______________________________________________
> Linux PCMCIA reimplementation list
> http://lists.infradead.org/mailman/listinfo/linux-pcmcia


-- 
Komuro <komurojun-mbn@xxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/