Re: [Suspend-devel] Resume performance

From: Rafael J. Wysocki
Date: Fri Sep 05 2008 - 14:39:32 EST


On Friday, 5 of September 2008, Anders Aagaard wrote:
> Rafael J. Wysocki wrote:
> > On Friday, 5 of September 2008, Anders Aagaard wrote:
> >> Hi
> >
> > Hi,
> >
> > This is a kernel problem, so let's CC the LKML.
> >
> >> I have a intel P35 board with a quad core cpu in it, it's currently
> >> running as a server for a small network, and I'd like to be able to shut
> >> it down when idle, and use wake on lan to wake it up when it's needed.
> >> Now I got that part working quite well, but for some reason I have a
> >> long delay in resume.
> >>
> >> I seem to remember being able to resume this computer in 2-3 seconds
> >> when I was testing it, now it needs 35 seconds to resume. It seems
> >> regardless of resume options used, and it always resumes to a working
> >> state without problems.
> >
> > What kernel are you using at the moment and which one was used for the
> > testing?
>
> I'm using gentoo's 2.6.25-r7, I've also tried vanilla sources.

Would it be possible to test 2.6.27-rc5-gi7 from kernel.org?

> >> I've tried quite a lot of things, booting with noapic/nosmp, booting a
> >> kernel without usb/network drivers, disabling ahci (using ata_piix
> >> driver instead of ahci), and there's always that one long delay. And
> >> I'm not quite sure how the kernel printk timing information works, so
> >> I'm not sure whats causing that delay.
> >>
> >> Output from dmesg when booting with nosmp (to get accurate timing data):
> >> scripts/show_delta -b "Force enabled HPET at resume"
> >> [349.821150 < 7.039261 >] ata3.00: configured for UDMA/133
> >> [349.821160 < 7.039271 >] sd 2:0:0:0: [sdc] 976773168 512-byte hardware
> >> sectors (500108 MB)
> >> [349.821165 < 7.039276 >] sd 2:0:0:0: [sdc] Write Protect is off
> >> [349.821166 < 7.039277 >] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> >> [349.821173 < 7.039284 >] sd 2:0:0:0: [sdc] Write cache: enabled, read
> >> cache: enabled, doesn't support DPO or FUA
> >> [349.972801 < 7.190912 >] ata1: SATA link up 3.0 Gbps (SStatus 123
> >> SControl 300)
> >> [349.979060 < 7.197171 >] ata1.00: configured for UDMA/133
> >> [349.979070 < 7.197181 >] sd 0:0:0:0: [sda] 976771055 512-byte hardware
> >> sectors (500107 MB)
> >> [349.979075 < 7.197186 >] sd 0:0:0:0: [sda] Write Protect is off
> >> [349.979076 < 7.197187 >] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> >> [349.979083 < 7.197194 >] sd 0:0:0:0: [sda] Write cache: enabled, read
> >> cache: enabled, doesn't support DPO or FUA
> >
> > It looks like this happens here. Can you try to unload the network driver
> > before suspend, please?
>
> I tried to build a kernel without it, and it still takes the exact same
> amount to boot, I've also tried unloading usb drivers and it takes the
> exact same amount of time.

Can you try to boot with init=/bin/bash and suspend to RAM? (Please have a
look at section 2 of Documentation/power/basic-pm-debugging.txt in the newer
kernel sources).

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/