[PATCH] Remove invalidate_partition call from do_md_stop.

[NeilBrown]

When stopping an md array, or just switching to read-only, we
currently call invalidate_partition while holding the mddev lock.
The main reason for this is probably to ensure all dirty buffers
are flushed (invalidate_partition calls fsync_bdev).

However if any dirty buffers are found, it will almost certainly cause
a deadlock as starting writeout will require an update to the
superblock, and performing that updates requires taking the mddev
lock - which is already held.

This deadlock can be demonstrated by running "reboot -f -n" with
a root filesystem on md/raid, and some dirty buffers in memory.

All other calls to stop an array should already happen after a flush.
The normal sequence is to stop using the array (e.g. umount) which
will cause __blkdev_put to call sync_blockdev.  Then open the
array and issue the STOP_ARRAY ioctl while the buffers are all still
clean.

So this invalidate_partition is normally a no-op, except for one case
where it will cause a deadlock.

So remove it.

This patch possibly addresses the regression recored in
   http://bugzilla.kernel.org/show_bug.cgi?id=11460
and
   http://bugzilla.kernel.org/show_bug.cgi?id=11452

though it isn't yet clear how it ever worked.


Signed-off-by: NeilBrown <neilb@xxxxxxx>
---
 drivers/md/md.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8cfadc5..4790c83 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3841,8 +3841,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 
 		del_timer_sync(&mddev->safemode_timer);
 
-		invalidate_partition(disk, 0);
-
 		switch(mode) {
 		case 1: /* readonly */
 			err  = -ENXIO;
-- 
1.5.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/