Re: Problems with ALPM on devices part of raid array

From: Török Edwin
Date: Sat Aug 30 2008 - 10:34:25 EST

Next message: Paul E. McKenney: "Re: [PATCH, RFC, tip/core/rcu] v3 scalable classic RCUimplementation"
Previous message: Carsten Emde: "Re: 2.6.26.3-rt3 bug report"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

[Cc-ing linux-kernel since I forgot to do so on my initial report]

On 2008-08-30 13:53, Tejun Heo wrote:

Török Edwin wrote:

I have an AHCI capable chipset now (ICH10), so I tried ALPM[*], by
echo-ing min_power to:
./class/scsi_host/host0/link_power_management_policy
./class/scsi_host/host5/link_power_management_policy

The 6 SATA2 drives have 3 partitions each, partition 1 is RAID1,
partition 3 is RAID10.

This soon caused me troubles, as the kernel gave I/O error messages, and
unmounted my filesystems running
on /dev/md4 (raid10 array). Unfortunately I don't have those messages
saved to my logs, because my /var filesystem got automatically unmounted.
I had no choice but to reboot, and then md kicked 4 drives out of the
md4 array (6 total drives), and then refused
to assemble (too few drives). The RAID1 array (md3) got reassembled, and
resynced successfully.
I had to force the assembly of /dev/md4 [and encountered a mdadm bug
while doing so: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=496334]

I think ALPM should refuse to set link pm if the device is part of a
raid array, or the md driver should be aware
of ALPM, and wait a little longer for the device to come back online.
Mentioning this problem somewhere in the sources/docs would be nice.

Being part of RAID is very unlikely to have anything to do with the
failures. Can you post kernel, boot log, error messages and the
output of hdparm -I on array members?

Hi Tejun,

I have found a (safe) way to reproduce this problem, without loosing data.
What I found is that setting the link_power_management_policy to min_power is completely harmless, and works,
however setting it *back* to max_performance causes an ATA link hard reset, and drives kicked out of RAID array.

For my RAID1 array this is not a big problem, since its resynced fast, and I can hot-remove/add drives,
however with RAID10 (last time, I didn't try again) I needed to use mdadm --assemble --force, and a full resync
(which takes hours).

I am using this Debian kernel: Linux debian 2.6.26-1-amd64 #1 SMP Thu Aug 28 11:13:42 UTC 2008 x86_64 GNU/Linux
You can find .config at end of this mail

The steps are these:
- unmount /var, /usr/, /home, take my raid10 array offline
- now I only have /dev/md3 which is a RAID1 array of 6 drives mounted on /
1. set all my drives to min_power:
# for i in /sys/class/scsi_host/*/link_power_management_policy; echo min_power >$i; done

2. check that it worked, do a sync:
# sync

3. now set one of the drives back to max_performance (the drive will get an ATA hard reset,
if I change the link pm policy for all drives, then all drives are affected, you can see in the dmesg at the end of this mail, I tried both)

# echo max_performance >/sys/class/scsi_host/host0/link_power_management_policy

4. sync again, this time ATA reset messages appear on the console
# sync

[ 2304.355772] ata6.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.355772] ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.355772] ata4.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.355772] ata4: SError: { PHYRdyChg CommWake }
[ 2304.355772] ata4.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.355772] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.355772] ata4.00: status: { DRDY }
[ 2304.355772] ata4: hard resetting link
[ 2304.896743] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.896743] ata5.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.896743] ata5: SError: { PHYRdyChg CommWake }
[ 2304.896743] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.896743] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.896743] ata5.00: status: { DRDY }
[ 2304.896743] ata5: hard resetting link
[ 2304.896743] ata6.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.896789] ata6: SError: { PHYRdyChg CommWake }
[ 2304.896835] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.896836] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.896939] ata6.00: status: { DRDY }
[ 2304.896984] ata6: hard resetting link
[ 2304.897035] ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.897093] ata3.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.897138] ata3: SError: { PHYRdyChg CommWake }
[ 2304.897184] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.897185] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.897288] ata3.00: status: { DRDY }
[ 2304.897332] ata3: hard resetting link
[ 2304.897381] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.897439] ata2.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.897485] ata2: SError: { PHYRdyChg CommWake }
[ 2304.897530] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.897531] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.897634] ata2.00: status: { DRDY }
[ 2304.897679] ata2: hard resetting link
[ 2305.832653] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.832656] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.837489] ata4.00: configured for UDMA/133
[ 2305.837489] ata4: EH complete
[ 2305.837489] ata5.00: configured for UDMA/133
[ 2305.837489] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.837489] sd 3:0:0:0: [sdd] Write Protect is off
[ 2305.837489] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2305.837489] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.837489] ata5: EH complete
[ 2305.837489] sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.837489] sd 4:0:0:0: [sde] Write Protect is off
[ 2305.837489] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2305.837489] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.841497] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.841556] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.841615] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.841615] ata3.00: configured for UDMA/133
[ 2305.841615] ata3: EH complete
[ 2305.841615] ata2.00: configured for UDMA/133
[ 2305.841615] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.841615] sd 2:0:0:0: [sdc] Write Protect is off
[ 2305.841615] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2305.841615] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.845240] ata6.00: configured for UDMA/133
[ 2305.845240] ata6: EH complete
[ 2305.841615] ata2: EH complete
[ 2305.841615] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.841615] sd 1:0:0:0: [sdb] Write Protect is off
[ 2305.841615] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2305.841615] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.841694] sd 5:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.845240] sd 5:0:0:0: [sdf] Write Protect is off
[ 2305.845284] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 2305.845299] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.852738] end_request: I/O error, dev sdd, sector 19534911
[ 2305.852738] md: super_written gets error=-5, uptodate=0
[ 2305.852738] raid1: Disk failure on sdd1, disabling device.
[ 2305.852738] raid1: Operation continuing on 5 devices.
[ 2305.852738] end_request: I/O error, dev sdf, sector 19534911
[ 2305.852738] md: super_written gets error=-5, uptodate=0
[ 2305.852738] raid1: Disk failure on sdf1, disabling device.
[ 2305.852738] raid1: Operation continuing on 4 devices.
[ 2305.853240] end_request: I/O error, dev sdc, sector 19534911
[ 2305.853240] md: super_written gets error=-5, uptodate=0
[ 2305.853240] raid1: Disk failure on sdc1, disabling device.
[ 2305.853240] raid1: Operation continuing on 3 devices.
[ 2305.841615] end_request: I/O error, dev sde, sector 19534911
[ 2305.841615] md: super_written gets error=-5, uptodate=0
[ 2305.841615] raid1: Disk failure on sde1, disabling device.
[ 2305.841615] raid1: Operation continuing on 2 devices.
[ 2305.857144] end_request: I/O error, dev sdb, sector 19534911
[ 2305.857144] md: super_written gets error=-5, uptodate=0
[ 2305.857144] raid1: Disk failure on sdb1, disabling device.
[ 2305.857144] raid1: Operation continuing on 1 devices.
[ 2305.872898] RAID1 conf printout:
[ 2305.872898] --- wd:1 rd:6
[ 2305.872898] disk 0, wo:0, o:1, dev:sda1
[ 2305.872898] disk 1, wo:1, o:0, dev:sdb1
[ 2305.872898] disk 2, wo:1, o:0, dev:sdd1
[ 2305.872898] disk 3, wo:1, o:0, dev:sde1
[ 2305.872898] disk 4, wo:1, o:0, dev:sdc1
[ 2305.872898] disk 5, wo:1, o:0, dev:sdf1
[ 2305.881242] RAID1 conf printout:
[ 2305.881286] --- wd:1 rd:6
[ 2305.881330] disk 0, wo:0, o:1, dev:sda1
[ 2305.881379] disk 1, wo:1, o:0, dev:sdb1
[ 2305.881423] disk 2, wo:1, o:0, dev:sdd1
[ 2305.881466] disk 3, wo:1, o:0, dev:sde1
[ 2305.881510] disk 4, wo:1, o:0, dev:sdc1
[ 2305.881557] RAID1 conf printout:
[ 2305.881599] --- wd:1 rd:6
[ 2305.881641] disk 0, wo:0, o:1, dev:sda1
[ 2305.881684] disk 1, wo:1, o:0, dev:sdb1
[ 2305.881728] disk 2, wo:1, o:0, dev:sdd1
[ 2305.881772] disk 3, wo:1, o:0, dev:sde1
[ 2305.881815] disk 4, wo:1, o:0, dev:sdc1
[ 2305.893241] RAID1 conf printout:
[ 2305.893285] --- wd:1 rd:6
[ 2305.893328] disk 0, wo:0, o:1, dev:sda1
[ 2305.893376] disk 1, wo:1, o:0, dev:sdb1
[ 2305.893418] disk 2, wo:1, o:0, dev:sdd1
[ 2305.893462] disk 3, wo:1, o:0, dev:sde1
[ 2305.893506] RAID1 conf printout:
[ 2305.893548] --- wd:1 rd:6
[ 2305.893589] disk 0, wo:0, o:1, dev:sda1
[ 2305.893633] disk 1, wo:1, o:0, dev:sdb1
[ 2305.893676] disk 2, wo:1, o:0, dev:sdd1
[ 2305.893719] disk 3, wo:1, o:0, dev:sde1
[ 2305.905242] RAID1 conf printout:
[ 2305.905285] --- wd:1 rd:6
[ 2305.905329] disk 0, wo:0, o:1, dev:sda1
[ 2305.905376] disk 1, wo:1, o:0, dev:sdb1
[ 2305.905418] disk 2, wo:1, o:0, dev:sdd1
[ 2305.905463] RAID1 conf printout:
[ 2305.905505] --- wd:1 rd:6
[ 2305.905546] disk 0, wo:0, o:1, dev:sda1
[ 2305.905590] disk 1, wo:1, o:0, dev:sdb1
[ 2305.905633] disk 2, wo:1, o:0, dev:sdd1
[ 2305.917241] RAID1 conf printout:
[ 2305.917284] --- wd:1 rd:6
[ 2305.917328] disk 0, wo:0, o:1, dev:sda1
[ 2305.917374] disk 1, wo:1, o:0, dev:sdb1
[ 2305.917417] RAID1 conf printout:
[ 2305.917460] --- wd:1 rd:6
[ 2305.917501] disk 0, wo:0, o:1, dev:sda1
[ 2305.917544] disk 1, wo:1, o:0, dev:sdb1
[ 2305.929241] RAID1 conf printout:
[ 2305.929284] --- wd:1 rd:6
[ 2305.929328] disk 0, wo:0, o:1, dev:sda1

5. The drives are working, they just got kicked out of the array, so lets add them back
mdadm --remove /dev/md3 /dev/sdc1 /dev/sdf1 /dev/sde1 /dev/sdd1 /dev/sdb1
mdadm --add /dev/md3 /dev/sdc1 /dev/sdf1 /dev/sde1 /dev/sdd1 /dev/sdb1
dmesg output for this is:
[ 2505.989204] md: md3 still in use.
[ 2521.148651] md: unbind<sdc1>
[ 2521.148651] md: export_rdev(sdc1)
[ 2537.045017] md: unbind<sdf1>
[ 2537.045017] md: export_rdev(sdf1)
[ 2537.070370] md: unbind<sde1>
[ 2537.070370] md: export_rdev(sde1)
[ 2537.812473] md: unbind<sdd1>
[ 2537.812524] md: export_rdev(sdd1)
[ 2537.822335] md: unbind<sdb1>
[ 2537.822335] md: export_rdev(sdb1)
[ 2565.680914] md: bind<sdf1>
[ 2565.722761] RAID1 conf printout:
[ 2565.722761] --- wd:1 rd:6
[ 2565.722761] disk 0, wo:0, o:1, dev:sda1
[ 2565.722761] disk 1, wo:1, o:1, dev:sdf1
[ 2565.724253] md: recovery of RAID array md3
[ 2565.724253] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 2565.724253] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 2565.724253] md: using 128k window, over a total of 9767424 blocks.
[ 2565.876674] md: bind<sde1>
[ 2565.995415] md: bind<sdd1>
[ 2566.057634] md: bind<sdb1>
[ 2566.101549] md: bind<sdc1>
[ 2782.657615] md: md3: recovery done.
[ 2783.368035] RAID1 conf printout:
[ 2783.368035] --- wd:2 rd:6
[ 2783.368035] disk 0, wo:0, o:1, dev:sda1
[ 2783.368035] disk 1, wo:0, o:1, dev:sdf1
[ 2783.555376] RAID1 conf printout:
[ 2783.555423] --- wd:2 rd:6
[ 2783.555467] disk 0, wo:0, o:1, dev:sda1
[ 2783.555533] disk 1, wo:0, o:1, dev:sdf1
[ 2783.555576] disk 2, wo:1, o:1, dev:sdc1
[ 2783.555625] RAID1 conf printout:
[ 2783.555667] --- wd:2 rd:6
[ 2783.555708] disk 0, wo:0, o:1, dev:sda1
[ 2783.555751] disk 1, wo:0, o:1, dev:sdf1
[ 2783.555794] disk 2, wo:1, o:1, dev:sdc1
[ 2783.555837] disk 3, wo:1, o:1, dev:sdb1
[ 2783.555882] RAID1 conf printout:
[ 2783.555924] --- wd:2 rd:6
[ 2783.555966] disk 0, wo:0, o:1, dev:sda1
[ 2783.559532] disk 1, wo:0, o:1, dev:sdf1
[ 2783.559532] disk 2, wo:1, o:1, dev:sdc1
[ 2783.559532] disk 3, wo:1, o:1, dev:sdb1
[ 2783.559532] disk 4, wo:1, o:1, dev:sdd1
[ 2783.559532] RAID1 conf printout:
[ 2783.559532] --- wd:2 rd:6
[ 2783.559532] disk 0, wo:0, o:1, dev:sda1
[ 2783.559532] disk 1, wo:0, o:1, dev:sdf1
[ 2783.559532] disk 2, wo:1, o:1, dev:sdc1
[ 2783.559532] disk 3, wo:1, o:1, dev:sdb1
[ 2783.559532] disk 4, wo:1, o:1, dev:sdd1
[ 2783.559532] disk 5, wo:1, o:1, dev:sde1
[ 2783.559532] md: recovery of RAID array md3
[ 2783.559532] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 2783.559532] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 2783.559532] md: using 128k window, over a total of 9767424 blocks.

If I repeat steps 1-4 again, I get ATA errors again, and drives kicked out.

Best regards,
--Edwin

The output of hdparm -I /dev/sd[a-z] is:

/dev/sda:

ATA device, with non-removable media
Model Number: WDC WD7501AALS-00J7B0 Serial Number: WD-WMATV0086271
Firmware Revision: 05.00K05
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1465149168
device size with M = 1024*1024: 715404 MBytes
device size with M = 1000*1000: 750156 MBytes (750 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
162min for SECURITY ERASE UNIT. 162min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee0b6d6c1
NAA : 5
IEEE OUI : 14ee
Unique ID : 0b6d6c1
Checksum: correct

/dev/sdb:

ATA device, with non-removable media
Model Number: WDC WD7501AALS-00J7B0 Serial Number: WD-WMATV0083946
Firmware Revision: 05.00K05
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1465149168
device size with M = 1024*1024: 715404 MBytes
device size with M = 1000*1000: 750156 MBytes (750 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
162min for SECURITY ERASE UNIT. 162min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee0b48ba2
NAA : 5
IEEE OUI : 14ee
Unique ID : 0b48ba2
Checksum: correct

/dev/sdc:

ATA device, with non-removable media
Model Number: WDC WD7501AALS-00J7B0 Serial Number: WD-WMATV0156388
Firmware Revision: 05.00K05
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1465149168
device size with M = 1024*1024: 715404 MBytes
device size with M = 1000*1000: 750156 MBytes (750 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
162min for SECURITY ERASE UNIT. 162min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee0560c33e7
NAA : 5
IEEE OUI : 14ee
Unique ID : 0560c33e7
Checksum: correct

/dev/sdd:

ATA device, with non-removable media
Model Number: WDC WD7501AALS-00J7B0 Serial Number: WD-WMATV0005417
Firmware Revision: 05.00K05
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1465149168
device size with M = 1024*1024: 715404 MBytes
device size with M = 1000*1000: 750156 MBytes (750 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
194min for SECURITY ERASE UNIT. 194min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee0b7229d
NAA : 5
IEEE OUI : 14ee
Unique ID : 0b7229d
Checksum: correct

/dev/sde:

ATA device, with non-removable media
Model Number: WDC WD7501AALS-00J7B0 Serial Number: WD-WMATV0053076
Firmware Revision: 05.00K05
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1465149168
device size with M = 1024*1024: 715404 MBytes
device size with M = 1000*1000: 750156 MBytes (750 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
162min for SECURITY ERASE UNIT. 162min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee0b6d521
NAA : 5
IEEE OUI : 14ee
Unique ID : 0b6d521
Checksum: correct

/dev/sdf:

ATA device, with non-removable media
Model Number: WDC WD7501AALS-00J7B0 Serial Number: WD-WMATV0038929
Firmware Revision: 05.00K05
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1465149168
device size with M = 1024*1024: 715404 MBytes
device size with M = 1000*1000: 750156 MBytes (750 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
162min for SECURITY ERASE UNIT. 162min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee0ab55b53
NAA : 5
IEEE OUI : 14ee
Unique ID : 0ab550b53
Checksum: correct

The output of dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008
[ 0.000000] Command line: root=/dev/md3 ro single
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1245184
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F7050, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT CFEE3040, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: FACP CFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: DSDT CFEE3180, 4C26 (r1 GBT GBTUACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS CFEE0000, 0040
[ 0.000000] ACPI: HPET CFEE7F00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
[ 0.000000] ACPI: MCFG CFEE7F80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: APIC CFEE7E00, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: SSDT CFEE88E0, 03AB (r1 PmRef CpuPm 3000 INTL 20040311)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000038fff] pages 26
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [37817000-37fef99f] RAMDISK
[ 0.000000] early res: 4 [9e800-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-dfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ 0.000000] [ffffe20003800000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000cbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 158
[ 0.000000] 0: 256 -> 851680
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048190
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1247 pages reserved
[ 0.000000] DMA zone: 2695 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md3 ro single
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2833.023 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
[ 0.004000] Memory: 4054384k/4980736k available (2225k kernel code, 138376k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083898] Calibrating delay using timer specific routine.. 5669.97 BogoMIPS (lpj=11339942)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.084005] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 6144K
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.084804] ACPI: Core revision 20080321
[ 0.132312] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07
[ 0.132412] Using local APIC timer interrupts.
[ 0.140008] APIC timer calibration result 20831070
[ 0.140008] Detected 20.831 MHz APIC timer.
[ 0.140008] Booting processor 1/1 ip 6000
[ 0.148009] Initializing CPU#1
[ 0.148009] Calibrating delay using timer specific routine.. 5666.08 BogoMIPS (lpj=11332171)
[ 0.148009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.148009] CPU: L2 cache: 6144K
[ 0.148009] CPU 1/1 -> Node 0
[ 0.148009] CPU: Physical Processor ID: 0
[ 0.148009] CPU: Processor Core ID: 1
[ 0.148009] CPU1: Thermal monitoring enabled (TM2)
[ 0.228014] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07
[ 0.228014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.232014] Booting processor 2/3 ip 6000
[ 0.240015] Initializing CPU#2
[ 0.240015] Calibrating delay using timer specific routine.. 5666.11 BogoMIPS (lpj=11332223)
[ 0.240015] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.240015] CPU: L2 cache: 6144K
[ 0.240015] CPU 2/3 -> Node 0
[ 0.240015] CPU: Physical Processor ID: 0
[ 0.240015] CPU: Processor Core ID: 3
[ 0.240015] CPU2: Thermal monitoring enabled (TM2)
[ 0.323252] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07
[ 0.323693] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.328020] Booting processor 3/2 ip 6000
[ 0.339678] Initializing CPU#3
[ 0.339678] Calibrating delay using timer specific routine.. 5666.11 BogoMIPS (lpj=11332220)
[ 0.339678] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.339678] CPU: L2 cache: 6144K
[ 0.339678] CPU 3/2 -> Node 0
[ 0.339678] CPU: Physical Processor ID: 0
[ 0.339678] CPU: Processor Core ID: 2
[ 0.339678] CPU3: Thermal monitoring enabled (TM2)
[ 0.420332] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07
[ 0.420773] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.425001] Brought up 4 CPUs
[ 0.425001] Total of 4 processors activated (22668.27 BogoMIPS).
[ 0.425001] CPU0 attaching sched-domain:
[ 0.425001] domain 0: span 0-1
[ 0.425001] groups: 0 1
[ 0.425001] domain 1: span 0-3
[ 0.425001] groups: 0-1 2-3
[ 0.425001] domain 2: span 0-3
[ 0.425001] groups: 0-3
[ 0.425001] CPU1 attaching sched-domain:
[ 0.425001] domain 0: span 0-1
[ 0.425001] groups: 1 0
[ 0.425001] domain 1: span 0-3
[ 0.425001] groups: 0-1 2-3
[ 0.425001] domain 2: span 0-3
[ 0.425001] groups: 0-3
[ 0.425001] CPU2 attaching sched-domain:
[ 0.425001] domain 0: span 2-3
[ 0.425001] groups: 2 3
[ 0.425001] domain 1: span 0-3
[ 0.425001] groups: 2-3 0-1
[ 0.425001] domain 2: span 0-3
[ 0.425001] groups: 0-3
[ 0.425001] CPU3 attaching sched-domain:
[ 0.425001] domain 0: span 2-3
[ 0.425001] groups: 3 2
[ 0.425001] domain 1: span 0-3
[ 0.425001] groups: 2-3 0-1
[ 0.425001] domain 2: span 0-3
[ 0.425001] groups: 0-3
[ 0.425001] net_namespace: 1224 bytes
[ 0.425001] Booting paravirtualized kernel on bare hardware
[ 0.425001] NET: Registered protocol family 16
[ 0.425001] ACPI: bus type pci registered
[ 0.425001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.425001] PCI: MCFG area at e0000000 reserved in E820
[ 0.428768] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.428811] PCI: Using configuration type 1 for base access
[ 0.430039] ACPI: EC: Look up EC in DSDT
[ 0.435168] ACPI: Interpreter enabled
[ 0.435218] ACPI: (supports S0 S3 S4 S5)
[ 0.435374] ACPI: Using IOAPIC for interrupt routing
[ 0.442100] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.442100] PCI: Transparent bridge - 0000:00:1e.0
[ 0.442100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.442100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.442100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.442100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.442100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.442100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.442100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.458101] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.458101] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.458101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.458101] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.458569] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.459086] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.464934] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.465397] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.471466] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.471466] pnp: PnP ACPI init
[ 0.471466] ACPI: bus type pnp registered
[ 0.471466] pnp 00:00: parse allocated resources
[ 0.471466] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.471466] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.471601] pnp 00:01: parse allocated resources
[ 0.471606] pnp 00:01: add io 0x10-0x1f flags 0x1
[ 0.471607] pnp 00:01: add io 0x22-0x3f flags 0x1
[ 0.471608] pnp 00:01: add io 0x44-0x5f flags 0x1
[ 0.471610] pnp 00:01: add io 0x62-0x63 flags 0x1
[ 0.471611] pnp 00:01: add io 0x65-0x6f flags 0x1
[ 0.471612] pnp 00:01: add io 0x74-0x7f flags 0x1
[ 0.471613] pnp 00:01: add io 0x91-0x93 flags 0x1
[ 0.471615] pnp 00:01: add io 0xa2-0xbf flags 0x1
[ 0.471616] pnp 00:01: add io 0xe0-0xef flags 0x1
[ 0.471617] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1
[ 0.471618] pnp 00:01: add io 0x290-0x29f flags 0x1
[ 0.471620] pnp 00:01: add io 0x800-0x87f flags 0x1
[ 0.471621] pnp 00:01: add io 0x290-0x294 flags 0x1
[ 0.471622] pnp 00:01: add io 0x880-0x88f flags 0x1
[ 0.471624] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.475466] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.475466] pnp 00:02: parse allocated resources
[ 0.475466] pnp 00:02: add dma 4 flags 0x4
[ 0.475466] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.475466] pnp 00:02: add io 0x80-0x90 flags 0x1
[ 0.475466] pnp 00:02: add io 0x94-0x9f flags 0x1
[ 0.475466] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.475466] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.475466] pnp 00:03: parse allocated resources
[ 0.475466] pnp 00:03: add irq 8 flags 0x1
[ 0.475466] pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x1
[ 0.475466] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.475466] pnp 00:04: parse allocated resources
[ 0.475466] pnp 00:04: add io 0x70-0x73 flags 0x1
[ 0.475466] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.475466] pnp 00:05: parse allocated resources
[ 0.475466] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.475466] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.475466] pnp 00:06: parse allocated resources
[ 0.475466] pnp 00:06: add io 0xf0-0xff flags 0x1
[ 0.475466] pnp 00:06: add irq 13 flags 0x1
[ 0.475466] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.475466] pnp 00:07: parse allocated resources
[ 0.475466] pnp 00:07: add io 0x3f0-0x3f5 flags 0x1
[ 0.475466] pnp 00:07: add io 0x3f7-0x3f7 flags 0x1
[ 0.475466] pnp 00:07: add irq 6 flags 0x1
[ 0.475466] pnp 00:07: add dma 2 flags 0x0
[ 0.475466] pnp 00:07: parse resource options
[ 0.475466] pnp 00:07: new independent option
[ 0.475466] pnp 00:07: new dependent option (priority 0x1)
[ 0.475466] pnp 00:07: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.475466] pnp 00:07: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.475466] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.475466] pnp 00:07: dma bitmask 0x4 flags 0x0
[ 0.475466] pnp 00:07: end dependent options
[ 0.475466] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.475466] pnp 00:08: parse allocated resources
[ 0.475466] pnp 00:08: add io 0x3f8-0x3ff flags 0x1
[ 0.475466] pnp 00:08: add irq 4 flags 0x1
[ 0.475466] pnp 00:08: parse resource options
[ 0.475466] pnp 00:08: new independent option
[ 0.475466] pnp 00:08: new dependent option (priority 0x1)
[ 0.475466] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.475466] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.475466] pnp 00:08: new dependent option (priority 0x1)
[ 0.475466] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.475466] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.475466] pnp 00:08: new dependent option (priority 0x1)
[ 0.475466] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.475466] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.475466] pnp 00:08: new dependent option (priority 0x1)
[ 0.475466] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.475466] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.475466] pnp 00:08: end dependent options
[ 0.475466] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.475466] pnp 00:09: parse allocated resources
[ 0.475466] pnp 00:09: add irq 12 flags 0x1
[ 0.475466] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.475466] pnp 00:0a: parse allocated resources
[ 0.475466] pnp 00:0a: add io 0x60-0x60 flags 0x1
[ 0.475466] pnp 00:0a: add io 0x64-0x64 flags 0x1
[ 0.475466] pnp 00:0a: add irq 1 flags 0x1
[ 0.475466] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.475466] pnp 00:0b: parse allocated resources
[ 0.475466] pnp 00:0b: add io 0x400-0x4bf flags 0x1
[ 0.475466] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.475466] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.475466] pnp 00:0c: parse allocated resources
[ 0.475466] pnp 00:0c: add mem 0xe0000000-0xe3ffffff flags 0x1
[ 0.475466] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.475466] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.475466] pnp 00:0d: parse allocated resources
[ 0.475466] pnp 00:0d: add mem 0xd2000-0xd3fff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xf0000-0xf7fff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xf8000-0xfbfff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xfc000-0xfffff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xcfee0000-0xcfefffff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0x0-0x9ffff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0x100000-0xcfedffff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xfed10000-0xfed1dfff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xfed20000-0xfed8ffff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xfee00000-0xfee00fff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xffb00000-0xffb7ffff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xfff00000-0xffffffff flags 0x1
[ 0.475466] pnp 00:0d: add mem 0xe0000-0xeffff flags 0x1
[ 0.475466] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.475466] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.475466] pnp 00:0e: parse allocated resources
[ 0.475466] pnp 00:0e: add mem 0xffb80000-0xffbfffff flags 0x1
[ 0.475466] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.475466] pnp: PnP ACPI: found 15 devices
[ 0.475466] ACPI: ACPI bus type pnp unregistered
[ 0.475466] usbcore: registered new interface driver usbfs
[ 0.475466] usbcore: registered new interface driver hub
[ 0.475466] usbcore: registered new device driver usb
[ 0.475466] PCI: Using ACPI for IRQ routing
[ 0.493155] PCI-GART: No AMD northbridge found.
[ 0.493202] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.493381] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.497134] ACPI: RTC can wake from S4
[ 0.511776] pnp: the driver 'system' has been registered
[ 0.511785] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.511831] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.511883] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.511927] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.511971] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.512015] system 00:01: driver attached
[ 0.512021] system 00:0b: ioport range 0x400-0x4bf has been reserved
[ 0.512065] system 00:0b: driver attached
[ 0.512069] system 00:0c: iomem range 0xe0000000-0xe3ffffff could not be reserved
[ 0.512124] system 00:0c: driver attached
[ 0.512127] system 00:0d: iomem range 0xd2000-0xd3fff has been reserved
[ 0.512172] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.512217] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.512262] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.512307] system 00:0d: iomem range 0xcfee0000-0xcfefffff could not be reserved
[ 0.512363] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.512408] system 00:0d: iomem range 0x100000-0xcfedffff could not be reserved
[ 0.512463] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.512518] system 00:0d: iomem range 0xfed10000-0xfed1dfff could not be reserved
[ 0.512574] system 00:0d: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 0.512629] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.512685] system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 0.512740] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.512796] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.512840] system 00:0d: driver attached
[ 0.514344] Switched to high resolution mode on CPU 2
[ 0.518409] Switched to high resolution mode on CPU 1
[ 0.518419] Switched to high resolution mode on CPU 3
[ 0.522417] PCI: Bridge: 0000:00:01.0
[ 0.522417] IO window: disabled.
[ 0.522417] MEM window: 0xe4000000-0xe6ffffff
[ 0.522417] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.522417] PCI: Bridge: 0000:00:1c.0
[ 0.522417] IO window: disabled.
[ 0.522417] MEM window: disabled.
[ 0.522417] PREFETCH window: disabled.
[ 0.522417] PCI: Bridge: 0000:00:1c.2
[ 0.522417] IO window: a000-afff
[ 0.522417] MEM window: 0xe7000000-0xe8ffffff
[ 0.522417] PREFETCH window: 0x00000000ec400000-0x00000000ec4fffff
[ 0.522417] PCI: Bridge: 0000:00:1c.3
[ 0.522417] IO window: b000-bfff
[ 0.522417] MEM window: 0xe9000000-0xe9ffffff
[ 0.522417] PREFETCH window: disabled.
[ 0.522417] PCI: Bridge: 0000:00:1c.4
[ 0.522417] IO window: c000-cfff
[ 0.522417] MEM window: 0xea000000-0xeaffffff
[ 0.522417] PREFETCH window: 0x00000000ec000000-0x00000000ec0fffff
[ 0.522417] PCI: Bridge: 0000:00:1c.5
[ 0.522417] IO window: d000-dfff
[ 0.522417] MEM window: 0xeb000000-0xebffffff
[ 0.522417] PREFETCH window: 0x00000000ec100000-0x00000000ec1fffff
[ 0.522417] PCI: Bridge: 0000:00:1e.0
[ 0.522417] IO window: disabled.
[ 0.522417] MEM window: 0xec200000-0xec2fffff
[ 0.522417] PREFETCH window: disabled.
[ 0.522417] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.522417] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.522417] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.522417] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.522417] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.522417] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.522417] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.522417] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.522417] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.522417] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.522417] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.522417] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.522417] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.522417] NET: Registered protocol family 2
[ 0.522688] Switched to high resolution mode on CPU 0
[ 0.570387] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.570387] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.570387] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.570387] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.570387] TCP reno registered
[ 0.586673] NET: Registered protocol family 1
[ 0.586806] checking if image is initramfs... it is
[ 1.052297] Freeing initrd memory: 8034k freed
[ 1.055838] audit: initializing netlink socket (disabled)
[ 1.055838] type=2000 audit(1220103307.032:1): initialized
[ 1.065317] Total HugeTLB memory allocated, 0
[ 1.065317] VFS: Disk quotas dquot_6.5.1
[ 1.065317] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.065317] msgmni has been set to 7934
[ 1.065317] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.065317] io scheduler noop registered
[ 1.065317] io scheduler anticipatory registered
[ 1.065317] io scheduler deadline registered
[ 1.065317] io scheduler cfq registered (default)
[ 1.065317] pci 0000:01:00.0: Boot video device
[ 1.065317] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.065317] assign_interrupt_mode Found MSI capability
[ 1.065317] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.065317] Allocate Port Service[0000:00:01.0:pcie03]
[ 1.065317] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.065317] assign_interrupt_mode Found MSI capability
[ 1.065317] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.065317] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.065317] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.065317] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.065317] assign_interrupt_mode Found MSI capability
[ 1.065317] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.065317] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.065317] Allocate Port Service[0000:00:1c.2:pcie03]
[ 1.065317] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.065317] assign_interrupt_mode Found MSI capability
[ 1.065317] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.065317] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.065317] Allocate Port Service[0000:00:1c.3:pcie03]
[ 1.065317] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 1.065317] assign_interrupt_mode Found MSI capability
[ 1.065317] Allocate Port Service[0000:00:1c.4:pcie00]
[ 1.065317] Allocate Port Service[0000:00:1c.4:pcie02]
[ 1.065317] Allocate Port Service[0000:00:1c.4:pcie03]
[ 1.065317] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 1.065317] assign_interrupt_mode Found MSI capability
[ 1.065317] Allocate Port Service[0000:00:1c.5:pcie00]
[ 1.065317] Allocate Port Service[0000:00:1c.5:pcie02]
[ 1.065317] Allocate Port Service[0000:00:1c.5:pcie03]
[ 1.069319] hpet_resources: 0xfed00000 is busy
[ 1.069319] Linux agpgart interface v0.103
[ 1.069319] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.069319] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.069319] pnp: the driver 'serial' has been registered
[ 1.069319] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.069319] serial 00:08: driver attached
[ 1.069428] brd: module loaded
[ 1.069428] input: Macintosh mouse button emulation as /class/input/input0
[ 1.069428] pnp: the driver 'i8042 kbd' has been registered
[ 1.069428] i8042 kbd 00:0a: driver attached
[ 1.069428] pnp: the driver 'i8042 aux' has been registered
[ 1.069428] i8042 aux 00:09: driver attached
[ 1.069428] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.069618] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.069665] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.089410] mice: PS/2 mouse device common for all mice
[ 1.089410] pnp: the driver 'rtc_cmos' has been registered
[ 1.089410] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.089410] rtc0: alarms up to one month
[ 1.089410] rtc_cmos 00:04: driver attached
[ 1.089410] cpuidle: using governor ladder
[ 1.089410] cpuidle: using governor menu
[ 1.089410] No iBFT detected.
[ 1.089410] TCP cubic registered
[ 1.089410] NET: Registered protocol family 17
[ 1.089410] registered taskstats version 1
[ 1.089410] rtc_cmos 00:04: setting system clock to 2008-08-30 13:35:07 UTC (1220103307)
[ 1.089410] Freeing unused kernel memory: 392k freed
[ 1.105308] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.147295] ACPI: SSDT CFEE8000, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311)
[ 1.147295] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.147295] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.147295] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.147295] ACPI: SSDT CFEE84C0, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 1.147295] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.147295] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.147342] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.147584] ACPI: SSDT CFEE8620, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20040311)
[ 1.151578] ACPI: CPU2 (power states: C1[C1] C2[C2])
[ 1.151578] ACPI: ACPI0007:02 is registered as cooling_device2
[ 1.151578] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.151578] ACPI: SSDT CFEE8780, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20040311)
[ 1.152903] ACPI: CPU3 (power states: C1[C1] C2[C2])
[ 1.153047] ACPI: ACPI0007:03 is registered as cooling_device3
[ 1.153092] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 1.227512] USB Universal Host Controller Interface driver v3.0
[ 1.227512] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.227512] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1.227512] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.227512] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.227512] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e200
[ 1.227512] usb usb1: configuration #1 chosen from 1 choice
[ 1.227512] hub 1-0:1.0: USB hub found
[ 1.227512] hub 1-0:1.0: 2 ports detected
[ 1.273381] No dock devices found.
[ 1.277382] SCSI subsystem initialized
[ 1.302287] libata version 3.00 loaded.
[ 1.327883] Floppy drive(s): fd0 is 1.44M
[ 1.346213] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.346213] FDC 0 is a post-1991 82077
[ 1.346323] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.346378] usb usb1: Product: UHCI Host Controller
[ 1.346421] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 1.346466] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.354070] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.358076] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.358079] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.358154] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.358231] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 1.358324] usb usb2: configuration #1 chosen from 1 choice
[ 1.358384] hub 2-0:1.0: USB hub found
[ 1.358427] hub 2-0:1.0: 2 ports detected
[ 1.463368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.463375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.463375] usb usb2: Product: UHCI Host Controller
[ 1.463375] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 1.463375] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.463375] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.463375] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 1.463375] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.463375] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.463375] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
[ 1.463375] usb usb3: configuration #1 chosen from 1 choice
[ 1.463375] hub 3-0:1.0: USB hub found
[ 1.463375] hub 3-0:1.0: 2 ports detected
[ 1.585999] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.586061] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.586116] usb usb3: Product: UHCI Host Controller
[ 1.586158] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 1.586201] usb usb3: SerialNumber: 0000:00:1a.2
[ 1.586201] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.586201] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.586201] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.586201] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[ 1.658195] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.658195] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xec305000
[ 1.675202] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.675316] usb usb4: configuration #1 chosen from 1 choice
[ 1.675378] hub 4-0:1.0: USB hub found
[ 1.675423] hub 4-0:1.0: 6 ports detected
[ 1.777768] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.777821] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.777875] usb usb4: Product: EHCI Host Controller
[ 1.777917] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 1.777961] usb usb4: SerialNumber: 0000:00:1a.7
[ 1.778207] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.778207] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.778207] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.778207] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.778207] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 1.778207] usb usb5: configuration #1 chosen from 1 choice
[ 1.778207] hub 5-0:1.0: USB hub found
[ 1.778207] hub 5-0:1.0: 2 ports detected
[ 1.887153] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.887196] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.887196] usb usb5: Product: UHCI Host Controller
[ 1.887196] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 1.887196] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.887196] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.887196] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.887196] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.887196] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.887196] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 1.887196] usb usb6: configuration #1 chosen from 1 choice
[ 1.887196] hub 6-0:1.0: USB hub found
[ 1.887196] hub 6-0:1.0: 2 ports detected
[ 2.083222] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.083283] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.083338] usb usb6: Product: UHCI Host Controller
[ 2.083380] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.083423] usb usb6: SerialNumber: 0000:00:1d.1
[ 2.085264] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.085264] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.085264] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.085264] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.085264] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 2.085264] usb usb7: configuration #1 chosen from 1 choice
[ 2.085264] hub 7-0:1.0: USB hub found
[ 2.085264] hub 7-0:1.0: 2 ports detected
[ 2.221219] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.221281] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.221336] usb usb7: Product: UHCI Host Controller
[ 2.221378] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.221421] usb usb7: SerialNumber: 0000:00:1d.2
[ 2.221421] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.221421] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.221421] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.221421] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 2.261419] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.261419] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xec304000
[ 2.285422] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.285533] usb usb8: configuration #1 chosen from 1 choice
[ 2.285594] hub 8-0:1.0: USB hub found
[ 2.285637] hub 8-0:1.0: 6 ports detected
[ 2.387996] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.388048] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.388103] usb usb8: Product: EHCI Host Controller
[ 2.388145] usb usb8: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 2.388188] usb usb8: SerialNumber: 0000:00:1d.7
[ 2.393416] ahci 0000:00:1f.2: version 3.0
[ 2.393416] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.843630] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 3.843693] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
[ 3.843754] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.847601] scsi0 : ahci
[ 3.847601] scsi1 : ahci
[ 3.847601] scsi2 : ahci
[ 3.847601] scsi3 : ahci
[ 3.847601] scsi4 : ahci
[ 3.847601] scsi5 : ahci
[ 3.847680] ata1: SATA max UDMA/133 abar m2048@0xec306000 port 0xec306100 irq 1273
[ 3.847736] ata2: SATA max UDMA/133 abar m2048@0xec306000 port 0xec306180 irq 1273
[ 3.847792] ata3: SATA max UDMA/133 abar m2048@0xec306000 port 0xec306200 irq 1273
[ 3.847848] ata4: SATA max UDMA/133 abar m2048@0xec306000 port 0xec306280 irq 1273
[ 3.847903] ata5: SATA max UDMA/133 abar m2048@0xec306000 port 0xec306300 irq 1273
[ 3.847959] ata6: SATA max UDMA/133 abar m2048@0xec306000 port 0xec306380 irq 1273
[ 4.671777] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.671767] ata1.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 4.671767] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.672094] ata1.00: configured for UDMA/133
[ 5.558790] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.558781] ata2.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 5.558781] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.563197] ata2.00: configured for UDMA/133
[ 6.042309] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.131806] ata3.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 6.131806] ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.131806] ata3.00: configured for UDMA/133
[ 6.607219] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.608423] ata4.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 6.608470] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.608423] ata4.00: configured for UDMA/133
[ 7.090884] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.151506] ata5.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 7.151506] ata5.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.151506] ata5.00: configured for UDMA/133
[ 8.109286] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.118160] ata6.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 8.118160] ata6.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.122478] ata6.00: configured for UDMA/133
[ 7.151506] scsi 0:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5
[ 7.151506] scsi 1:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5
[ 7.151506] scsi 2:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5
[ 7.151506] scsi 3:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5
[ 7.151506] scsi 4:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5
[ 7.151506] scsi 5:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5
[ 8.429006] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 8.429006] sata_sil24 0000:03:00.0: version 1.1
[ 8.429006] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 8.429006] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 8.429006] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 8.429006] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 8.429006] scsi6 : sata_sil24
[ 8.429006] eth0: RTL8168c/8111c at 0xffffc20000632000, 00:1f:d0:23:89:fe, XID 3c4000c0 IRQ 1272
[ 8.429006] scsi7 : sata_sil24
[ 8.429006] ata7: SATA max UDMA/100 host m128@0xe8004000 port 0xe8000000 irq 18
[ 8.429006] ata8: SATA max UDMA/100 host m128@0xe8004000 port 0xe8002000 irq 18
[ 10.840394] ata7: SATA link down (SStatus 0 SControl 0)
[ 13.704354] ata8: SATA link down (SStatus 0 SControl 0)
[ 14.716334] ACPI: PCI Interrupt 0000:07:07.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 14.846759] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[ec204000-ec2047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 14.846759] Uniform Multi-Platform E-IDE driver
[ 14.846804] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.847185] JMB: IDE controller (0x197b:0x2368 rev 0x00) at PCI slot 0000:04:00.0
[ 14.847185] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 14.847185] JMB: 100% native mode on irq 19
[ 14.847185] ide0: BM-DMA at 0xb400-0xb407
[ 14.847185] ide1: BM-DMA at 0xb408-0xb40f
[ 14.847185] Probing IDE interface ide0...
[ 14.856760] Driver 'sd' needs updating - please use bus_type methods
[ 14.856881] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.856949] sd 0:0:0:0: [sda] Write Protect is off
[ 14.860461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.860461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.860461] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.860461] sd 0:0:0:0: [sda] Write Protect is off
[ 14.860461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.860461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.860461] sda: sda1 sda2 sda3
[ 14.881341] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.881341] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.881341] sd 1:0:0:0: [sdb] Write Protect is off
[ 14.881341] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 14.881341] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.881341] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.881341] sd 1:0:0:0: [sdb] Write Protect is off
[ 14.881341] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 14.881341] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.881341] sdb: sdb1 sdb2 sdb3
[ 14.906515] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 14.906515] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.906515] sd 2:0:0:0: [sdc] Write Protect is off
[ 14.906515] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 14.906515] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.906515] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.906515] sd 2:0:0:0: [sdc] Write Protect is off
[ 14.906515] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 14.906515] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.906515] sdc: sdc1 sdc2 sdc3
[ 14.928338] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 14.928338] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.928338] sd 3:0:0:0: [sdd] Write Protect is off
[ 14.928338] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 14.928338] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.928338] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.928338] sd 3:0:0:0: [sdd] Write Protect is off
[ 14.928338] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 14.928338] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.928338] sdd: sdd1 sdd2 sdd3
[ 14.952282] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 14.952282] sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.952282] sd 4:0:0:0: [sde] Write Protect is off
[ 14.952282] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 14.952282] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.954288] sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.954288] sd 4:0:0:0: [sde] Write Protect is off
[ 14.954288] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 14.954288] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.954288] sde: sde1 sde2 sde3
[ 14.976122] sd 4:0:0:0: [sde] Attached SCSI disk
[ 14.976202] sd 5:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.976265] sd 5:0:0:0: [sdf] Write Protect is off
[ 14.976308] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 14.976323] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.976408] sd 5:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
[ 14.976472] sd 5:0:0:0: [sdf] Write Protect is off
[ 14.976515] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 14.976530] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.976587] sdf: sdf1 sdf2 sdf3
[ 14.994523] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 15.594725] hda: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
[ 16.145540] ieee1394: Host added: ID:BUS[0-00:1023] GUID[002bcaee00001fd0]
[ 16.706809] hdb: SAMSUNG CD-ROM SH-152A, ATAPI CD/DVD-ROM drive
[ 16.762418] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 16.762501] hda: UDMA/33 mode selected
[ 16.762660] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 16.762726] hdb: UDMA/33 mode selected
[ 16.762869] Probing IDE interface ide1...
[ 17.581059] ide0 at 0xb000-0xb007,0xb102 on irq 19
[ 17.582203] ide1 at 0xb200-0xb207,0xb302 on irq 19
[ 17.863689] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
[ 17.863689] Uniform CD-ROM driver Revision: 3.20
[ 17.870292] hdb: ATAPI 52X CD-ROM drive, 128kB Cache
[ 17.925104] md: raid1 personality registered for level 1
[ 17.927090] md: raid10 personality registered for level 10
[ 17.929410] md: md3 stopped.
[ 17.960031] md: bind<sdb1>
[ 17.960031] md: bind<sdd1>
[ 17.960083] md: bind<sde1>
[ 17.960031] md: bind<sdc1>
[ 17.960732] md: bind<sdf1>
[ 17.960732] md: bind<sda1>
[ 17.971855] raid1: raid set md3 active with 6 out of 6 mirrors
[ 17.971855] md: md4 stopped.
[ 17.975859] md: bind<sdb3>
[ 17.975859] md: bind<sdd3>
[ 17.975859] md: bind<sde3>
[ 17.976982] md: bind<sdc3>
[ 17.975859] md: bind<sdf3>
[ 17.975859] md: bind<sda3>
[ 17.983851] raid10: raid set md4 active with 6 out of 6 devices
[ 18.123469] device-mapper: uevent: version 1.0.3
[ 18.123547] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 18.139475] PM: Starting manual resume from disk
[ 18.189012] kjournald starting. Commit interval 5 seconds
[ 18.189660] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.026659] udevd version 125 started
[ 20.332956] input: Power Button (FF) as /class/input/input2
[ 20.414997] ACPI: Power Button (FF) [PWRF]
[ 20.415079] input: Power Button (CM) as /class/input/input3
[ 20.483338] ACPI: Power Button (CM) [PWRB]
[ 20.496008] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.508008] input: PC Speaker as /class/input/input4
[ 20.533768] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 20.533768] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 20.543847] Error: Driver 'pcspkr' is already registered, aborting...
[ 21.112299] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[ 21.476256] Error: Driver 'pcspkr' is already registered, aborting...
[ 23.959337] Adding 2931852k swap on /dev/sda2. Priority:-1 extents:1 across:2931852k
[ 23.963712] Adding 2931852k swap on /dev/sdd2. Priority:-2 extents:1 across:2931852k
[ 24.455456] EXT3 FS on md3, internal journal
[ 24.534056] loop: module loaded
[ 24.574483] it87: Found IT8718F chip at 0x290, revision 5
[ 24.574483] it87: in3 is VCC (+5V)
[ 24.596260] coretemp coretemp.0: Using relative temperature scale!
[ 24.596290] coretemp coretemp.1: Using relative temperature scale!
[ 24.596360] coretemp coretemp.2: Using relative temperature scale!
[ 24.596427] coretemp coretemp.3: Using relative temperature scale!
[ 25.379749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 25.379749] SGI XFS Quota Management subsystem
[ 25.379749] Filesystem "dm-0": Disabling barriers, not supported by the underlying device
[ 25.379749] XFS mounting filesystem dm-0
[ 25.589938] Ending clean XFS mount for filesystem: dm-0
[ 25.589938] Filesystem "dm-1": Disabling barriers, not supported by the underlying device
[ 25.589938] XFS mounting filesystem dm-1
[ 25.808033] Ending clean XFS mount for filesystem: dm-1
[ 25.982767] ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
[ 25.982767] ReiserFS: dm-2: using ordered data mode
[ 25.997390] ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 25.997390] ReiserFS: dm-2: checking transaction log (dm-2)
[ 26.049615] ReiserFS: dm-2: Using r5 hash to sort names
[ 27.356049] fuse init (API version 7.9)
[ 30.872983] r8169: eth0: link up
[ 30.872983] r8169: eth0: link up
[ 36.793363] NET: Registered protocol family 10
[ 36.793725] lo: Disabled Privacy Extensions
[ 51.030543] eth0: no IPv6 routers present
[ 137.906238] md: md4 still in use.
[ 457.735609] md: md4 stopped.
[ 457.735609] md: unbind<sda3>
[ 457.735609] md: export_rdev(sda3)
[ 457.735609] md: unbind<sdf3>
[ 457.735609] md: export_rdev(sdf3)
[ 457.735609] md: unbind<sdc3>
[ 457.735609] md: export_rdev(sdc3)
[ 457.735609] md: unbind<sde3>
[ 457.735609] md: export_rdev(sde3)
[ 457.735609] md: unbind<sdd3>
[ 457.735609] md: export_rdev(sdd3)
[ 457.735609] md: unbind<sdb3>
[ 457.735609] md: export_rdev(sdb3)
[ 765.553777] dmesg(4322): dirtied inode 10440 (dmesg_next) on tmpfs
[ 765.558443] lm-profiler(4317): READ block 8913752 on md3
[ 765.594108] lm-profiler(4323): READ block 9124536 on md3
[ 765.594908] lm-profiler(4317): READ block 8913824 on md3
[ 765.607814] lm-profiler(4317): READ block 8914648 on md3
[ 765.607819] lm-profiler(4327): READ block 9768168 on md3
[ 765.610108] lm-profiler(4317): READ block 8913608 on md3
[ 765.610108] diff(4323): READ block 9124568 on md3
[ 765.610108] diff(4323): READ block 9124576 on md3
[ 765.610108] diff(4323): READ block 9124584 on md3
[ 765.610108] diff(4323): READ block 9124592 on md3
[ 765.610108] diff(4323): READ block 9124600 on md3
[ 765.610108] diff(4323): READ block 9124608 on md3
[ 765.610108] diff(4323): READ block 9124616 on md3
[ 765.610108] diff(4323): READ block 9124624 on md3
[ 765.610108] diff(4323): READ block 9124632 on md3
[ 765.611819] lm-profiler(4317): READ block 8913624 on md3
[ 765.617081] lm-profiler(4330): READ block 9096920 on md3
[ 765.618311] diff(4323): READ block 9124640 on md3
[ 765.620603] awk(4327): READ block 9768264 on md3
[ 765.621243] awk(4327): READ block 9768696 on md3
[ 765.624595] sort(4330): READ block 9096952 on md3
[ 765.624595] sort(4330): READ block 9096960 on md3
[ 765.624595] sort(4330): READ block 9096968 on md3
[ 765.624595] sort(4330): READ block 9096976 on md3
[ 765.624595] sort(4330): READ block 9096984 on md3
[ 765.624595] sort(4330): READ block 9096992 on md3
[ 765.624595] sort(4330): READ block 9097000 on md3
[ 765.624595] sort(4330): READ block 9097008 on md3
[ 765.624595] sort(4330): READ block 9097016 on md3
[ 765.628836] lm-profiler(4331): READ block 9098960 on md3
[ 765.629947] sort(4330): READ block 9097024 on md3
[ 765.632836] awk(4327): READ block 9768200 on md3
[ 765.632843] awk(4327): READ block 9768208 on md3
[ 765.632846] awk(4327): READ block 9768216 on md3
[ 765.632849] awk(4327): READ block 9768224 on md3
[ 765.632851] awk(4327): READ block 9768232 on md3
[ 765.632854] awk(4327): READ block 9768240 on md3
[ 765.632857] awk(4327): READ block 9768248 on md3
[ 765.632860] awk(4327): READ block 9768256 on md3
[ 765.632868] awk(4327): READ block 9768272 on md3
[ 765.636835] uniq(4331): READ block 9098992 on md3
[ 765.639739] awk(4327): READ block 9768544 on md3
[ 765.649084] awk(4327): READ block 9768432 on md3
[ 765.656835] awk(4327): READ block 8398752 on md3
[ 765.656835] awk(4327): READ block 8398760 on md3
[ 765.656835] awk(4327): READ block 8398768 on md3
[ 765.656835] awk(4327): READ block 8398784 on md3
[ 765.665084] awk(4327): READ block 8399360 on md3
[ 765.680840] cat(4342): dirtied inode 10449 (write_accesses_1) on tmpfs
[ 766.695642] diff(4355): dirtied inode 10463 (dmesg_next) on tmpfs
[ 766.699643] cat(4365): dirtied inode 10472 (write_accesses_2) on tmpfs
[ 766.699851] cat(4366): dirtied inode 10480 (read_accesses_2) on tmpfs
[ 768.243779] diff(4378): dirtied inode 10486 (dmesg_next) on tmpfs
[ 768.247780] cat(4388): dirtied inode 10495 (write_accesses_3) on tmpfs
[ 769.244968] diff(4392): dirtied inode 10509 (dmesg_next) on tmpfs
[ 769.341001] cat(4412): dirtied inode 10527 (read_accesses_4) on tmpfs
[ 770.341032] dmesg(4414): dirtied inode 10532 (dmesg_next) on tmpfs
[ 770.350000] cat(4434): dirtied inode 10541 (write_accesses_5) on tmpfs
[ 771.530834] dmesg(4437): dirtied inode 10555 (dmesg_next) on tmpfs
[ 771.934699] cat(4457): dirtied inode 10564 (write_accesses_6) on tmpfs
[ 772.937772] dmesg(4460): dirtied inode 10578 (dmesg_next) on tmpfs
[ 773.133573] cat(4480): dirtied inode 10587 (write_accesses_7) on tmpfs
[ 773.133573] cat(4481): dirtied inode 10596 (read_accesses_7) on tmpfs
[ 774.141215] dmesg(4483): dirtied inode 10601 (dmesg_next) on tmpfs
[ 774.564704] cat(4503): dirtied inode 10610 (write_accesses_8) on tmpfs
[ 774.564704] cat(4504): dirtied inode 10619 (read_accesses_8) on tmpfs
[ 775.596162] dmesg(4506): dirtied inode 10624 (dmesg_next) on tmpfs
[ 775.603904] cat(4526): dirtied inode 10633 (write_accesses_9) on tmpfs
[ 776.796494] diff(4539): dirtied inode 10647 (dmesg_next) on tmpfs
[ 776.796494] cat(4549): dirtied inode 10656 (write_accesses_10) on tmpfs
[ 778.228980] diff(4553): dirtied inode 10670 (dmesg_next) on tmpfs
[ 778.242555] cat(4573): dirtied inode 10688 (read_accesses_11) on tmpfs
[ 779.420481] dmesg(4575): dirtied inode 10693 (dmesg_next) on tmpfs
[ 779.876449] cat(4595): dirtied inode 10702 (write_accesses_12) on tmpfs
[ 779.876449] cat(4596): dirtied inode 10711 (read_accesses_12) on tmpfs
[ 780.873748] dmesg(4598): dirtied inode 10716 (dmesg_next) on tmpfs
[ 780.885388] cat(4618): dirtied inode 10725 (write_accesses_13) on tmpfs
[ 780.885388] cat(4619): dirtied inode 10734 (read_accesses_13) on tmpfs
[ 782.061382] dmesg(4621): dirtied inode 10739 (dmesg_next) on tmpfs
[ 782.073537] cat(4641): dirtied inode 10748 (write_accesses_14) on tmpfs
[ 783.097230] dmesg(4644): dirtied inode 10762 (dmesg_next) on tmpfs
[ 783.289200] cat(4664): dirtied inode 10771 (write_accesses_15) on tmpfs
[ 783.289200] cat(4665): dirtied inode 10780 (read_accesses_15) on tmpfs
[ 784.297200] dmesg(4667): dirtied inode 10785 (dmesg_next) on tmpfs
[ 784.792721] cat(4687): dirtied inode 10794 (write_accesses_16) on tmpfs
[ 784.792721] cat(4688): dirtied inode 10803 (read_accesses_16) on tmpfs
[ 785.793032] dmesg(4690): dirtied inode 10808 (dmesg_next) on tmpfs
[ 785.800721] cat(4710): dirtied inode 10817 (write_accesses_17) on tmpfs
[ 786.809821] diff(4723): dirtied inode 10831 (dmesg_next) on tmpfs
[ 786.815006] cat(4733): dirtied inode 10840 (write_accesses_18) on tmpfs
[ 787.815777] dmesg(4736): dirtied inode 10854 (dmesg_next) on tmpfs
[ 787.837475] cat(4756): dirtied inode 10863 (write_accesses_19) on tmpfs
[ 788.833007] dmesg(4759): dirtied inode 10877 (dmesg_next) on tmpfs
[ 788.860578] cat(4779): dirtied inode 10886 (write_accesses_20) on tmpfs
[ 789.894393] dmesg(4782): dirtied inode 10900 (dmesg_next) on tmpfs
[ 789.898205] cat(4802): dirtied inode 10909 (write_accesses_21) on tmpfs
[ 790.915619] diff(4815): dirtied inode 10923 (dmesg_next) on tmpfs
[ 790.915619] cat(4825): dirtied inode 10932 (write_accesses_22) on tmpfs
[ 791.975208] diff(4838): dirtied inode 10946 (dmesg_next) on tmpfs
[ 791.979256] cat(4848): dirtied inode 10955 (write_accesses_23) on tmpfs
[ 791.979257] cat(4849): dirtied inode 10964 (read_accesses_23) on tmpfs
[ 792.980171] dmesg(4851): dirtied inode 10969 (dmesg_next) on tmpfs
[ 793.045383] cat(4871): dirtied inode 10978 (write_accesses_24) on tmpfs
[ 794.116424] dmesg(4874): dirtied inode 10992 (dmesg_next) on tmpfs
[ 794.123047] cat(4894): dirtied inode 11001 (write_accesses_25) on tmpfs
[ 794.123047] cat(4895): dirtied inode 11010 (read_accesses_25) on tmpfs
[ 795.132837] diff(4907): dirtied inode 11015 (dmesg_next) on tmpfs
[ 795.136607] cat(4917): dirtied inode 11024 (write_accesses_26) on tmpfs
[ 796.137000] diff(4921): dirtied inode 11038 (dmesg_next) on tmpfs
[ 796.146300] cat(4940): dirtied inode 11047 (write_accesses_27) on tmpfs
[ 796.146300] cat(4941): dirtied inode 11056 (read_accesses_27) on tmpfs
[ 797.146859] dmesg(4943): dirtied inode 11061 (dmesg_next) on tmpfs
[ 797.246607] cat(4963): dirtied inode 11070 (write_accesses_28) on tmpfs
[ 798.350273] dmesg(4966): dirtied inode 11084 (dmesg_next) on tmpfs
[ 798.359815] cat(4986): dirtied inode 11093 (write_accesses_29) on tmpfs
[ 799.363984] dmesg(4989): dirtied inode 11107 (dmesg_next) on tmpfs
[ 799.477241] cat(5009): dirtied inode 11116 (write_accesses_30) on tmpfs
[ 800.481322] diff(5013): dirtied inode 11130 (dmesg_next) on tmpfs
[ 801.658319] diff(5036): dirtied inode 11153 (dmesg_next) on tmpfs
[ 801.795692] cat(5055): dirtied inode 11162 (write_accesses_32) on tmpfs
[ 801.795692] cat(5056): dirtied inode 11171 (read_accesses_32) on tmpfs
[ 802.797730] dmesg(5058): dirtied inode 11176 (dmesg_next) on tmpfs
[ 802.805720] cat(5078): dirtied inode 11185 (write_accesses_33) on tmpfs
[ 803.807576] dmesg(5081): dirtied inode 11199 (dmesg_next) on tmpfs
[ 803.959161] cat(5101): dirtied inode 11208 (write_accesses_34) on tmpfs
[ 803.959402] cat(5102): dirtied inode 11217 (read_accesses_34) on tmpfs
[ 804.968707] diff(5114): dirtied inode 11222 (dmesg_next) on tmpfs
[ 805.126067] cat(5124): dirtied inode 11231 (write_accesses_35) on tmpfs
[ 806.129210] dmesg(5127): dirtied inode 11245 (dmesg_next) on tmpfs
[ 806.303108] cat(5147): dirtied inode 11254 (write_accesses_36) on tmpfs
[ 806.303108] cat(5148): dirtied inode 11263 (read_accesses_36) on tmpfs
[ 807.303998] dmesg(5150): dirtied inode 11268 (dmesg_next) on tmpfs
[ 807.313250] cat(5170): dirtied inode 11277 (write_accesses_37) on tmpfs
[ 807.313250] cat(5171): dirtied inode 11286 (read_accesses_37) on tmpfs
[ 808.310769] dmesg(5173): dirtied inode 11291 (dmesg_next) on tmpfs
[ 808.498329] cat(5193): dirtied inode 11300 (write_accesses_38) on tmpfs
[ 809.692708] dmesg(5196): dirtied inode 11314 (dmesg_next) on tmpfs
[ 809.699467] cat(5216): dirtied inode 11323 (write_accesses_39) on tmpfs
[ 809.700497] cat(5217): dirtied inode 11332 (read_accesses_39) on tmpfs
[ 810.703486] diff(5220): dirtied inode 11337 (dmesg_next) on tmpfs
[ 810.716479] cat(5239): dirtied inode 11346 (write_accesses_40) on tmpfs
[ 810.716479] cat(5240): dirtied inode 11355 (read_accesses_40) on tmpfs
[ 811.717030] dmesg(5242): dirtied inode 11360 (dmesg_next) on tmpfs
[ 811.725017] cat(5262): dirtied inode 11369 (write_accesses_41) on tmpfs
[ 812.951791] diff(5275): dirtied inode 11383 (dmesg_next) on tmpfs
[ 812.955735] cat(5285): dirtied inode 11392 (write_accesses_42) on tmpfs
[ 812.955735] cat(5286): dirtied inode 11401 (read_accesses_42) on tmpfs
[ 813.956266] dmesg(5288): dirtied inode 11406 (dmesg_next) on tmpfs
[ 813.966776] cat(5308): dirtied inode 11415 (write_accesses_43) on tmpfs
[ 814.971793] dmesg(5311): dirtied inode 11429 (dmesg_next) on tmpfs
[ 815.216769] cat(5331): dirtied inode 11438 (write_accesses_44) on tmpfs
[ 816.230846] diff(5344): dirtied inode 11452 (dmesg_next) on tmpfs
[ 816.230846] cat(5354): dirtied inode 11461 (write_accesses_45) on tmpfs
[ 817.488744] diff(5367): dirtied inode 11475 (dmesg_next) on tmpfs
[ 817.492976] cat(5378): dirtied inode 11493 (read_accesses_46) on tmpfs
[ 818.489989] dmesg(5380): dirtied inode 11498 (dmesg_next) on tmpfs
[ 818.760614] cat(5400): dirtied inode 11507 (write_accesses_47) on tmpfs
[ 819.760802] dmesg(5403): dirtied inode 11521 (dmesg_next) on tmpfs
[ 820.040758] cat(5423): dirtied inode 11530 (write_accesses_48) on tmpfs
[ 821.325241] dmesg(5426): dirtied inode 11544 (dmesg_next) on tmpfs
[ 821.331885] cat(5446): dirtied inode 11553 (write_accesses_49) on tmpfs
[ 821.334812] cat(5447): dirtied inode 11562 (read_accesses_49) on tmpfs
[ 822.340246] diff(5450): dirtied inode 11567 (dmesg_next) on tmpfs
[ 822.637298] cat(5470): dirtied inode 11585 (read_accesses_50) on tmpfs
[ 823.918483] dmesg(5472): dirtied inode 11590 (dmesg_next) on tmpfs
[ 823.926455] cat(5492): dirtied inode 11599 (write_accesses_51) on tmpfs
[ 824.927934] dmesg(5495): dirtied inode 11613 (dmesg_next) on tmpfs
[ 825.240835] cat(5515): dirtied inode 11622 (write_accesses_52) on tmpfs
[ 826.255144] diff(5528): dirtied inode 11636 (dmesg_next) on tmpfs
[ 826.575172] cat(5538): dirtied inode 11645 (write_accesses_53) on tmpfs
[ 827.578675] dmesg(5541): dirtied inode 11659 (dmesg_next) on tmpfs
[ 827.921115] cat(5561): dirtied inode 11668 (write_accesses_54) on tmpfs
[ 828.923620] dmesg(5564): dirtied inode 11682 (dmesg_next) on tmpfs
[ 829.207516] cat(5584): dirtied inode 11691 (write_accesses_55) on tmpfs
[ 830.212796] dmesg(5587): dirtied inode 11705 (dmesg_next) on tmpfs
[ 830.563350] cat(5607): dirtied inode 11714 (write_accesses_56) on tmpfs
[ 830.563555] cat(5608): dirtied inode 11723 (read_accesses_56) on tmpfs
[ 831.577225] diff(5620): dirtied inode 11728 (dmesg_next) on tmpfs
[ 831.932973] cat(5630): dirtied inode 11737 (write_accesses_57) on tmpfs
[ 832.936478] dmesg(5633): dirtied inode 11751 (dmesg_next) on tmpfs
[ 833.315593] cat(5653): dirtied inode 11760 (write_accesses_58) on tmpfs
[ 834.317429] dmesg(5656): dirtied inode 11774 (dmesg_next) on tmpfs
[ 834.599475] cat(5676): dirtied inode 11783 (write_accesses_59) on tmpfs
[ 835.604747] dmesg(5679): dirtied inode 11797 (dmesg_next) on tmpfs
[ 835.991417] cat(5699): dirtied inode 11806 (write_accesses_60) on tmpfs
[ 835.993835] cat(5700): dirtied inode 11815 (read_accesses_60) on tmpfs
[ 836.997441] diff(5703): dirtied inode 11820 (dmesg_next) on tmpfs
[ 838.398422] dmesg(5725): dirtied inode 11843 (dmesg_next) on tmpfs
[ 838.806655] cat(5745): dirtied inode 11852 (write_accesses_62) on tmpfs
[ 840.091206] dmesg(5748): dirtied inode 11866 (dmesg_next) on tmpfs
[ 840.099180] cat(5768): dirtied inode 11875 (write_accesses_63) on tmpfs
[ 841.525732] diff(5781): dirtied inode 11889 (dmesg_next) on tmpfs
[ 841.529731] cat(5791): dirtied inode 11898 (write_accesses_64) on tmpfs
[ 841.529731] cat(5792): dirtied inode 11907 (read_accesses_64) on tmpfs
[ 842.625119] dmesg(5794): dirtied inode 11912 (dmesg_next) on tmpfs
[ 842.630735] cat(5814): dirtied inode 11921 (write_accesses_65) on tmpfs
[ 844.085339] diff(5827): dirtied inode 11935 (dmesg_next) on tmpfs
[ 844.089031] cat(5837): dirtied inode 11944 (write_accesses_66) on tmpfs
[ 844.089031] cat(5838): dirtied inode 11953 (read_accesses_66) on tmpfs
[ 845.089646] dmesg(5840): dirtied inode 11958 (dmesg_next) on tmpfs
[ 845.375414] cat(5860): dirtied inode 11967 (write_accesses_67) on tmpfs
[ 846.380161] dmesg(5863): dirtied inode 11981 (dmesg_next) on tmpfs
[ 846.845163] cat(5883): dirtied inode 11990 (write_accesses_68) on tmpfs
[ 848.319810] diff(5896): dirtied inode 12004 (dmesg_next) on tmpfs
[ 848.326074] cat(5906): dirtied inode 12013 (write_accesses_69) on tmpfs
[ 848.326074] cat(5907): dirtied inode 12022 (read_accesses_69) on tmpfs
[ 849.323542] dmesg(5909): dirtied inode 12027 (dmesg_next) on tmpfs
[ 849.339261] cat(5929): dirtied inode 12036 (write_accesses_70) on tmpfs
[ 849.808701] cat(5930): dirtied inode 12045 (read_accesses_70) on tmpfs
[ 851.088737] dmesg(5932): dirtied inode 12050 (dmesg_next) on tmpfs
[ 851.096428] cat(5952): dirtied inode 12059 (write_accesses_71) on tmpfs
[ 852.098491] dmesg(5955): dirtied inode 12073 (dmesg_next) on tmpfs
[ 852.588340] cat(5975): dirtied inode 12082 (write_accesses_72) on tmpfs
[ 853.592372] diff(5979): dirtied inode 12096 (dmesg_next) on tmpfs
[ 854.044575] cat(5999): dirtied inode 12114 (read_accesses_73) on tmpfs
[ 855.047932] dmesg(6001): dirtied inode 12119 (dmesg_next) on tmpfs
[ 855.334101] cat(6021): dirtied inode 12128 (write_accesses_74) on tmpfs
[ 856.576762] dmesg(6024): dirtied inode 12142 (dmesg_next) on tmpfs
[ 856.584729] cat(6044): dirtied inode 12151 (write_accesses_75) on tmpfs
[ 857.870720] diff(6048): dirtied inode 12165 (dmesg_next) on tmpfs
[ 857.911306] cat(6068): dirtied inode 12183 (read_accesses_76) on tmpfs
[ 859.120374] dmesg(6070): dirtied inode 12188 (dmesg_next) on tmpfs
[ 859.168321] cat(6090): dirtied inode 12197 (write_accesses_77) on tmpfs
[ 859.168321] cat(6091): dirtied inode 12206 (read_accesses_77) on tmpfs
[ 860.570929] dmesg(6093): dirtied inode 12211 (dmesg_next) on tmpfs
[ 860.627646] cat(6113): dirtied inode 12220 (write_accesses_78) on tmpfs
[ 861.812753] diff(6117): dirtied inode 12234 (dmesg_next) on tmpfs
[ 861.882667] cat(6136): dirtied inode 12243 (write_accesses_79) on tmpfs
[ 863.103014] dmesg(6139): dirtied inode 12257 (dmesg_next) on tmpfs
[ 863.183005] cat(6159): dirtied inode 12266 (write_accesses_80) on tmpfs
[ 864.180480] diff(6163): dirtied inode 12280 (dmesg_next) on tmpfs
[ 864.358076] cat(6183): dirtied inode 12298 (read_accesses_81) on tmpfs
[ 865.358151] dmesg(6185): dirtied inode 12303 (dmesg_next) on tmpfs
[ 865.562082] cat(6205): dirtied inode 12312 (write_accesses_82) on tmpfs
[ 867.010309] dmesg(6208): dirtied inode 12326 (dmesg_next) on tmpfs
[ 867.018271] cat(6228): dirtied inode 12335 (write_accesses_83) on tmpfs
[ 867.022277] cat(6229): dirtied inode 12344 (read_accesses_83) on tmpfs
[ 868.221770] dmesg(6231): dirtied inode 12349 (dmesg_next) on tmpfs
[ 868.335430] cat(6251): dirtied inode 12358 (write_accesses_84) on tmpfs
[ 869.466367] dmesg(6254): dirtied inode 12372 (dmesg_next) on tmpfs
[ 869.474329] cat(6274): dirtied inode 12381 (write_accesses_85) on tmpfs
[ 870.753724] dmesg(6277): dirtied inode 12395 (dmesg_next) on tmpfs
[ 870.765056] cat(6297): dirtied inode 12404 (write_accesses_86) on tmpfs
[ 870.766373] cat(6298): dirtied inode 12413 (read_accesses_86) on tmpfs
[ 871.877232] dmesg(6300): dirtied inode 12418 (dmesg_next) on tmpfs
[ 871.886709] cat(6320): dirtied inode 12427 (write_accesses_87) on tmpfs
[ 873.336407] dmesg(6323): dirtied inode 12441 (dmesg_next) on tmpfs
[ 873.350087] cat(6343): dirtied inode 12450 (write_accesses_88) on tmpfs
[ 874.583197] diff(6356): dirtied inode 12464 (dmesg_next) on tmpfs
[ 874.587686] cat(6366): dirtied inode 12473 (write_accesses_89) on tmpfs
[ 875.865436] dmesg(6369): dirtied inode 12487 (dmesg_next) on tmpfs
[ 876.035963] cat(6389): dirtied inode 12496 (write_accesses_90) on tmpfs
[ 877.119425] dmesg(6392): dirtied inode 12510 (dmesg_next) on tmpfs
[ 877.127382] cat(6412): dirtied inode 12519 (write_accesses_91) on tmpfs
[ 878.406763] dmesg(6415): dirtied inode 12533 (dmesg_next) on tmpfs
[ 878.414927] cat(6436): dirtied inode 12551 (read_accesses_92) on tmpfs
[ 879.681431] diff(6448): dirtied inode 12556 (dmesg_next) on tmpfs
[ 879.685437] cat(6459): dirtied inode 12574 (read_accesses_93) on tmpfs
[ 880.681493] dmesg(6461): dirtied inode 12579 (dmesg_next) on tmpfs
[ 880.781694] cat(6481): dirtied inode 12588 (write_accesses_94) on tmpfs
[ 881.826690] dmesg(6484): dirtied inode 12602 (dmesg_next) on tmpfs
[ 881.833445] cat(6504): dirtied inode 12611 (write_accesses_95) on tmpfs
[ 883.120460] diff(6508): dirtied inode 12625 (dmesg_next) on tmpfs
[ 883.313029] cat(6528): dirtied inode 12643 (read_accesses_96) on tmpfs
[ 884.333892] dmesg(6530): dirtied inode 12648 (dmesg_next) on tmpfs
[ 884.565845] cat(6550): dirtied inode 12657 (write_accesses_97) on tmpfs
[ 884.565845] cat(6551): dirtied inode 12666 (read_accesses_97) on tmpfs
[ 885.567901] dmesg(6553): dirtied inode 12671 (dmesg_next) on tmpfs
[ 885.975728] cat(6573): dirtied inode 12680 (write_accesses_98) on tmpfs
[ 886.978005] dmesg(6576): dirtied inode 12694 (dmesg_next) on tmpfs
[ 888.451842] diff(6609): dirtied inode 12717 (dmesg_next) on tmpfs
[ 888.455842] cat(6619): dirtied inode 12726 (write_accesses_100) on tmpfs
[ 889.455889] dmesg(6622): dirtied inode 12740 (dmesg_next) on tmpfs
[ 889.465359] cat(6642): dirtied inode 12749 (write_accesses_101) on tmpfs
[ 890.743429] dmesg(6645): dirtied inode 12763 (dmesg_next) on tmpfs
[ 890.749394] cat(6665): dirtied inode 12772 (write_accesses_102) on tmpfs
[ 891.923889] diff(6678): dirtied inode 12786 (dmesg_next) on tmpfs
[ 891.928369] cat(6688): dirtied inode 12795 (write_accesses_103) on tmpfs
[ 892.953018] diff(6692): dirtied inode 12809 (dmesg_next) on tmpfs
[ 892.961148] cat(6711): dirtied inode 12818 (write_accesses_104) on tmpfs
[ 892.961148] cat(6712): dirtied inode 12827 (read_accesses_104) on tmpfs
[ 894.148519] dmesg(6714): dirtied inode 12832 (dmesg_next) on tmpfs
[ 894.454351] cat(6734): dirtied inode 12841 (write_accesses_105) on tmpfs
[ 895.463549] diff(6747): dirtied inode 12855 (dmesg_next) on tmpfs
[ 895.469747] cat(6757): dirtied inode 12864 (write_accesses_106) on tmpfs
[ 895.471447] cat(6758): dirtied inode 12873 (read_accesses_106) on tmpfs
[ 896.475375] dmesg(6760): dirtied inode 12878 (dmesg_next) on tmpfs
[ 896.488842] cat(6780): dirtied inode 12887 (write_accesses_107) on tmpfs
[ 897.932945] dmesg(6783): dirtied inode 12901 (dmesg_next) on tmpfs
[ 897.942429] cat(6803): dirtied inode 12910 (write_accesses_108) on tmpfs
[ 899.129500] diff(6807): dirtied inode 12924 (dmesg_next) on tmpfs
[ 900.478084] dmesg(6829): dirtied inode 12947 (dmesg_next) on tmpfs
[ 900.668040] cat(6849): dirtied inode 12956 (write_accesses_110) on tmpfs
[ 901.674425] dmesg(6852): dirtied inode 12970 (dmesg_next) on tmpfs
[ 902.036836] cat(6872): dirtied inode 12979 (write_accesses_111) on tmpfs
[ 902.037410] cat(6873): dirtied inode 12988 (read_accesses_111) on tmpfs
[ 903.224855] dmesg(6875): dirtied inode 12993 (dmesg_next) on tmpfs
[ 903.237365] cat(6895): dirtied inode 13002 (write_accesses_112) on tmpfs
[ 903.237365] cat(6896): dirtied inode 13011 (read_accesses_112) on tmpfs
[ 904.313117] dmesg(6898): dirtied inode 13016 (dmesg_next) on tmpfs
[ 904.323475] cat(6918): dirtied inode 13025 (write_accesses_113) on tmpfs
[ 905.528059] diff(6931): dirtied inode 13039 (dmesg_next) on tmpfs
[ 905.532054] cat(6941): dirtied inode 13048 (write_accesses_114) on tmpfs
[ 905.532054] cat(6942): dirtied inode 13057 (read_accesses_114) on tmpfs
[ 906.532110] dmesg(6944): dirtied inode 13062 (dmesg_next) on tmpfs
[ 906.540591] cat(6964): dirtied inode 13071 (write_accesses_115) on tmpfs
[ 907.942817] dmesg(6967): dirtied inode 13085 (dmesg_next) on tmpfs
[ 908.134791] cat(6987): dirtied inode 13094 (write_accesses_116) on tmpfs
[ 909.141043] diff(6991): dirtied inode 13108 (dmesg_next) on tmpfs
[ 909.569009] cat(7011): dirtied inode 13126 (read_accesses_117) on tmpfs
[ 910.598250] dmesg(7013): dirtied inode 13131 (dmesg_next) on tmpfs
[ 910.790223] cat(7033): dirtied inode 13140 (write_accesses_118) on tmpfs
[ 911.792613] dmesg(7036): dirtied inode 13154 (dmesg_next) on tmpfs
[ 911.798593] cat(7057): dirtied inode 13172 (read_accesses_119) on tmpfs
[ 913.238549] diff(7060): dirtied inode 13177 (dmesg_next) on tmpfs
[ 913.430521] cat(7080): dirtied inode 13195 (read_accesses_120) on tmpfs
[ 914.431044] dmesg(7082): dirtied inode 13200 (dmesg_next) on tmpfs
[ 914.444501] cat(7102): dirtied inode 13209 (write_accesses_121) on tmpfs
[ 915.896874] dmesg(7105): dirtied inode 13223 (dmesg_next) on tmpfs
[ 916.089267] cat(7125): dirtied inode 13232 (write_accesses_122) on tmpfs
[ 917.092028] diff(7129): dirtied inode 13246 (dmesg_next) on tmpfs
[ 918.116772] dmesg(7151): dirtied inode 13269 (dmesg_next) on tmpfs
[ 918.180452] cat(7171): dirtied inode 13278 (write_accesses_124) on tmpfs
[ 919.186799] dmesg(7174): dirtied inode 13292 (dmesg_next) on tmpfs
[ 919.193987] cat(7194): dirtied inode 13301 (write_accesses_125) on tmpfs
[ 920.682462] diff(7198): dirtied inode 13315 (dmesg_next) on tmpfs
[ 920.695417] cat(7218): dirtied inode 13333 (read_accesses_126) on tmpfs
[ 921.690950] dmesg(7220): dirtied inode 13338 (dmesg_next) on tmpfs
[ 921.707828] cat(7240): dirtied inode 13347 (write_accesses_127) on tmpfs
[ 922.729878] dmesg(7243): dirtied inode 13361 (dmesg_next) on tmpfs
[ 922.740940] cat(7263): dirtied inode 13370 (write_accesses_128) on tmpfs
[ 923.741165] dmesg(7266): dirtied inode 13384 (dmesg_next) on tmpfs
[ 923.776489] cat(7286): dirtied inode 13393 (write_accesses_129) on tmpfs
[ 924.820556] dmesg(7289): dirtied inode 13407 (dmesg_next) on tmpfs
[ 924.826641] cat(7309): dirtied inode 13416 (write_accesses_130) on tmpfs
[ 924.826986] cat(7310): dirtied inode 13425 (read_accesses_130) on tmpfs
[ 925.838566] diff(7313): dirtied inode 13430 (dmesg_next) on tmpfs
[ 925.847562] cat(7332): dirtied inode 13439 (write_accesses_131) on tmpfs
[ 925.847562] cat(7333): dirtied inode 13448 (read_accesses_131) on tmpfs
[ 926.849577] dmesg(7335): dirtied inode 13453 (dmesg_next) on tmpfs
[ 926.859048] cat(7355): dirtied inode 13462 (write_accesses_132) on tmpfs
[ 927.866588] diff(7359): dirtied inode 13476 (dmesg_next) on tmpfs
[ 928.872937] dmesg(7381): dirtied inode 13499 (dmesg_next) on tmpfs
[ 928.957813] cat(7401): dirtied inode 13508 (write_accesses_134) on tmpfs
[ 929.960702] dmesg(7404): dirtied inode 13522 (dmesg_next) on tmpfs
[ 930.049203] cat(7424): dirtied inode 13531 (write_accesses_135) on tmpfs
[ 931.055243] diff(7428): dirtied inode 13545 (dmesg_next) on tmpfs
[ 931.159261] cat(7447): dirtied inode 13554 (write_accesses_136) on tmpfs
[ 931.165926] cat(7448): dirtied inode 13563 (read_accesses_136) on tmpfs
[ 932.163431] dmesg(7450): dirtied inode 13568 (dmesg_next) on tmpfs
[ 932.276573] cat(7470): dirtied inode 13577 (write_accesses_137) on tmpfs
[ 933.280961] dmesg(7473): dirtied inode 13591 (dmesg_next) on tmpfs
[ 934.295069] diff(7497): dirtied inode 13614 (dmesg_next) on tmpfs
[ 934.304461] cat(7517): dirtied inode 13632 (read_accesses_139) on tmpfs
[ 935.306745] dmesg(7519): dirtied inode 13637 (dmesg_next) on tmpfs
[ 935.318188] cat(7539): dirtied inode 13646 (write_accesses_140) on tmpfs
[ 936.464208] dmesg(7542): dirtied inode 13660 (dmesg_next) on tmpfs
[ 936.472676] cat(7562): dirtied inode 13669 (write_accesses_141) on tmpfs
[ 936.474973] cat(7563): dirtied inode 13678 (read_accesses_141) on tmpfs
[ 937.475219] dmesg(7565): dirtied inode 13683 (dmesg_next) on tmpfs
[ 937.485535] cat(7585): dirtied inode 13692 (write_accesses_142) on tmpfs
[ 938.654128] diff(7598): dirtied inode 13706 (dmesg_next) on tmpfs
[ 938.658362] cat(7608): dirtied inode 13715 (write_accesses_143) on tmpfs
[ 938.658362] cat(7609): dirtied inode 13724 (read_accesses_143) on tmpfs
[ 939.655484] dmesg(7611): dirtied inode 13729 (dmesg_next) on tmpfs
[ 939.837764] cat(7631): dirtied inode 13738 (write_accesses_144) on tmpfs
[ 940.840540] dmesg(7634): dirtied inode 13752 (dmesg_next) on tmpfs
[ 941.024787] cat(7654): dirtied inode 13761 (write_accesses_145) on tmpfs
[ 942.032292] diff(7658): dirtied inode 13775 (dmesg_next) on tmpfs
[ 942.226107] cat(7677): dirtied inode 13784 (write_accesses_146) on tmpfs
[ 942.227445] cat(7678): dirtied inode 13793 (read_accesses_146) on tmpfs
[ 943.228417] dmesg(7680): dirtied inode 13798 (dmesg_next) on tmpfs
[ 943.437244] cat(7700): dirtied inode 13807 (write_accesses_147) on tmpfs
[ 944.446942] diff(7713): dirtied inode 13821 (dmesg_next) on tmpfs
[ 944.450943] cat(7723): dirtied inode 13830 (write_accesses_148) on tmpfs
[ 944.451191] cat(7724): dirtied inode 13839 (read_accesses_148) on tmpfs
[ 945.451350] dmesg(7726): dirtied inode 13844 (dmesg_next) on tmpfs
[ 945.679542] cat(7746): dirtied inode 13853 (write_accesses_149) on tmpfs
[ 946.682674] dmesg(7749): dirtied inode 13867 (dmesg_next) on tmpfs
[ 946.694959] cat(7769): dirtied inode 13876 (write_accesses_150) on tmpfs
[ 946.694959] cat(7770): dirtied inode 13885 (read_accesses_150) on tmpfs
[ 947.696845] dmesg(7772): dirtied inode 13890 (dmesg_next) on tmpfs
[ 947.944206] cat(7792): dirtied inode 13899 (write_accesses_151) on tmpfs
[ 949.199015] dmesg(7795): dirtied inode 13913 (dmesg_next) on tmpfs
[ 949.208325] cat(7815): dirtied inode 13922 (write_accesses_152) on tmpfs
[ 949.209994] cat(7816): dirtied inode 13931 (read_accesses_152) on tmpfs
[ 950.210718] dmesg(7818): dirtied inode 13936 (dmesg_next) on tmpfs
[ 950.479007] cat(7838): dirtied inode 13945 (write_accesses_153) on tmpfs
[ 951.483535] dmesg(7841): dirtied inode 13959 (dmesg_next) on tmpfs
[ 951.500419] cat(7861): dirtied inode 13968 (write_accesses_154) on tmpfs
[ 951.501328] cat(7862): dirtied inode 13977 (read_accesses_154) on tmpfs
[ 952.499141] dmesg(7864): dirtied inode 13982 (dmesg_next) on tmpfs
[ 952.791099] cat(7884): dirtied inode 13991 (write_accesses_155) on tmpfs
[ 953.792088] dmesg(7887): dirtied inode 14005 (dmesg_next) on tmpfs
[ 954.086120] cat(7907): dirtied inode 14014 (write_accesses_156) on tmpfs
[ 954.086120] cat(7908): dirtied inode 14023 (read_accesses_156) on tmpfs
[ 955.083730] dmesg(7910): dirtied inode 14028 (dmesg_next) on tmpfs
[ 955.395695] cat(7930): dirtied inode 14037 (write_accesses_157) on tmpfs
[ 956.403171] diff(7934): dirtied inode 14051 (dmesg_next) on tmpfs
[ 957.718911] dmesg(7956): dirtied inode 14074 (dmesg_next) on tmpfs
[ 958.047199] cat(7976): dirtied inode 14083 (write_accesses_159) on tmpfs
[ 959.384644] dmesg(7979): dirtied inode 14097 (dmesg_next) on tmpfs
[ 959.393293] cat(7999): dirtied inode 14106 (write_accesses_160) on tmpfs
[ 959.393293] cat(8000): dirtied inode 14115 (read_accesses_160) on tmpfs
[ 960.397808] dmesg(8002): dirtied inode 14120 (dmesg_next) on tmpfs
[ 960.749437] cat(8022): dirtied inode 14129 (write_accesses_161) on tmpfs
[ 961.749474] dmesg(8025): dirtied inode 14143 (dmesg_next) on tmpfs
[ 962.036495] cat(8045): dirtied inode 14152 (write_accesses_162) on tmpfs
[ 963.045838] diff(8049): dirtied inode 14166 (dmesg_next) on tmpfs
[ 963.369862] cat(8069): dirtied inode 14184 (read_accesses_163) on tmpfs
[ 964.369917] dmesg(8071): dirtied inode 14189 (dmesg_next) on tmpfs
[ 964.650787] cat(8091): dirtied inode 14198 (write_accesses_164) on tmpfs
[ 966.041304] diff(8104): dirtied inode 14212 (dmesg_next) on tmpfs
[ 966.044662] cat(8114): dirtied inode 14221 (write_accesses_165) on tmpfs
[ 966.044662] cat(8115): dirtied inode 14230 (read_accesses_165) on tmpfs
[ 967.327417] dmesg(8117): dirtied inode 14235 (dmesg_next) on tmpfs
[ 967.336909] cat(8137): dirtied inode 14244 (write_accesses_166) on tmpfs
[ 968.738523] dmesg(8140): dirtied inode 14258 (dmesg_next) on tmpfs
[ 968.750517] cat(8160): dirtied inode 14267 (write_accesses_167) on tmpfs
[ 968.750518] cat(8161): dirtied inode 14276 (read_accesses_167) on tmpfs
[ 970.160950] dmesg(8163): dirtied inode 14281 (dmesg_next) on tmpfs
[ 970.167859] cat(8183): dirtied inode 14290 (write_accesses_168) on tmpfs
[ 970.167859] cat(8184): dirtied inode 14299 (read_accesses_168) on tmpfs
[ 971.176979] diff(8187): dirtied inode 14304 (dmesg_next) on tmpfs
[ 971.493459] cat(8206): dirtied inode 14313 (write_accesses_169) on tmpfs
[ 971.494797] cat(8207): dirtied inode 14322 (read_accesses_169) on tmpfs
[ 972.494708] dmesg(8209): dirtied inode 14327 (dmesg_next) on tmpfs
[ 972.779455] cat(8229): dirtied inode 14336 (write_accesses_170) on tmpfs
[ 974.221475] dmesg(8232): dirtied inode 14350 (dmesg_next) on tmpfs
[ 974.232225] cat(8252): dirtied inode 14359 (write_accesses_171) on tmpfs
[ 975.234989] dmesg(8255): dirtied inode 14373 (dmesg_next) on tmpfs
[ 975.521707] cat(8275): dirtied inode 14382 (write_accesses_172) on tmpfs
[ 975.525291] cat(8276): dirtied inode 14391 (read_accesses_172) on tmpfs
[ 976.525295] dmesg(8278): dirtied inode 14396 (dmesg_next) on tmpfs
[ 976.533286] cat(8298): dirtied inode 14405 (write_accesses_173) on tmpfs
[ 978.133621] dmesg(8301): dirtied inode 14419 (dmesg_next) on tmpfs
[ 978.137822] cat(8321): dirtied inode 14428 (write_accesses_174) on tmpfs
[ 978.146712] cat(8322): dirtied inode 14436 (read_accesses_174) on tmpfs
[ 979.156111] dmesg(8324): dirtied inode 14442 (dmesg_next) on tmpfs
[ 979.644117] cat(8344): dirtied inode 14451 (write_accesses_175) on tmpfs
[ 979.644117] cat(8345): dirtied inode 14460 (read_accesses_175) on tmpfs
[ 980.647899] dmesg(8347): dirtied inode 14465 (dmesg_next) on tmpfs
[ 980.928226] cat(8367): dirtied inode 14474 (write_accesses_176) on tmpfs
[ 982.389789] dmesg(8370): dirtied inode 14488 (dmesg_next) on tmpfs
[ 982.396784] cat(8391): dirtied inode 14506 (read_accesses_177) on tmpfs
[ 983.640010] dmesg(8393): dirtied inode 14511 (dmesg_next) on tmpfs
[ 983.648527] cat(8413): dirtied inode 14520 (write_accesses_178) on tmpfs
[ 984.928878] diff(8417): dirtied inode 14534 (dmesg_next) on tmpfs
[ 984.953420] cat(8436): dirtied inode 14543 (write_accesses_179) on tmpfs
[ 984.953420] cat(8437): dirtied inode 14552 (read_accesses_179) on tmpfs
[ 986.179928] dmesg(8439): dirtied inode 14557 (dmesg_next) on tmpfs
[ 986.224383] cat(8459): dirtied inode 14566 (write_accesses_180) on tmpfs
[ 987.472835] dmesg(8462): dirtied inode 14580 (dmesg_next) on tmpfs
[ 987.521909] cat(8483): dirtied inode 14598 (read_accesses_181) on tmpfs
[ 988.928533] diff(8486): dirtied inode 14603 (dmesg_next) on tmpfs
[ 988.937100] cat(8505): dirtied inode 14612 (write_accesses_182) on tmpfs
[ 988.937100] cat(8506): dirtied inode 14621 (read_accesses_182) on tmpfs
[ 990.184049] dmesg(8508): dirtied inode 14626 (dmesg_next) on tmpfs
[ 990.248815] cat(8528): dirtied inode 14635 (write_accesses_183) on tmpfs
[ 990.248815] cat(8529): dirtied inode 14644 (read_accesses_183) on tmpfs
[ 991.255227] diff(8532): dirtied inode 14649 (dmesg_next) on tmpfs
[ 991.335832] cat(8551): dirtied inode 14658 (write_accesses_184) on tmpfs
[ 991.335832] cat(8552): dirtied inode 14667 (read_accesses_184) on tmpfs
[ 992.547850] dmesg(8554): dirtied inode 14672 (dmesg_next) on tmpfs
[ 992.632049] cat(8574): dirtied inode 14681 (write_accesses_185) on tmpfs
[ 993.801989] diff(8578): dirtied inode 14695 (dmesg_next) on tmpfs
[ 993.901940] cat(8597): dirtied inode 14704 (write_accesses_186) on tmpfs
[ 993.901941] cat(8598): dirtied inode 14713 (read_accesses_186) on tmpfs
[ 995.256871] dmesg(8600): dirtied inode 14718 (dmesg_next) on tmpfs
[ 995.361070] cat(8620): dirtied inode 14727 (write_accesses_187) on tmpfs
[ 995.364675] cat(8621): dirtied inode 14736 (read_accesses_187) on tmpfs
[ 996.508669] dmesg(8623): dirtied inode 14741 (dmesg_next) on tmpfs
[ 996.522148] cat(8643): dirtied inode 14750 (write_accesses_188) on tmpfs
[ 997.800277] dmesg(8646): dirtied inode 14764 (dmesg_next) on tmpfs
[ 997.928756] cat(8667): dirtied inode 14782 (read_accesses_189) on tmpfs
[ 999.050046] diff(8670): dirtied inode 14787 (dmesg_next) on tmpfs
[ 999.058544] cat(8689): dirtied inode 14796 (write_accesses_190) on tmpfs
[ 999.058544] cat(8690): dirtied inode 14805 (read_accesses_190) on tmpfs
[ 1000.340517] dmesg(8692): dirtied inode 14810 (dmesg_next) on tmpfs
[ 1000.485140] cat(8712): dirtied inode 14819 (write_accesses_191) on tmpfs
[ 1001.792331] diff(8716): dirtied inode 14833 (dmesg_next) on tmpfs
[ 1001.803447] cat(8735): dirtied inode 14842 (write_accesses_192) on tmpfs
[ 1001.803447] cat(8736): dirtied inode 14851 (read_accesses_192) on tmpfs
[ 1002.807779] dmesg(8738): dirtied inode 14856 (dmesg_next) on tmpfs
[ 1003.105616] cat(8758): dirtied inode 14865 (write_accesses_193) on tmpfs
[ 1004.356278] diff(8762): dirtied inode 14879 (dmesg_next) on tmpfs
[ 1004.364209] cat(8781): dirtied inode 14888 (write_accesses_194) on tmpfs
[ 1004.364209] cat(8782): dirtied inode 14897 (read_accesses_194) on tmpfs
[ 1005.483712] dmesg(8784): dirtied inode 14902 (dmesg_next) on tmpfs
[ 1005.668700] cat(8804): dirtied inode 14911 (write_accesses_195) on tmpfs
[ 1005.668700] cat(8805): dirtied inode 14920 (read_accesses_195) on tmpfs
[ 1006.676699] dmesg(8807): dirtied inode 14925 (dmesg_next) on tmpfs
[ 1006.927200] cat(8827): dirtied inode 14934 (write_accesses_196) on tmpfs
[ 1008.188428] diff(8831): dirtied inode 14948 (dmesg_next) on tmpfs
[ 1008.376763] cat(8850): dirtied inode 14957 (write_accesses_197) on tmpfs
[ 1008.377992] cat(8851): dirtied inode 14966 (read_accesses_197) on tmpfs
[ 1009.421522] dmesg(8853): dirtied inode 14971 (dmesg_next) on tmpfs
[ 1009.430030] cat(8873): dirtied inode 14980 (write_accesses_198) on tmpfs
[ 1010.711071] diff(8877): dirtied inode 14994 (dmesg_next) on tmpfs
[ 1010.899186] cat(8896): dirtied inode 15003 (write_accesses_199) on tmpfs
[ 1010.900412] cat(8897): dirtied inode 15012 (read_accesses_199) on tmpfs
[ 1011.922168] dmesg(8899): dirtied inode 15017 (dmesg_next) on tmpfs
[ 1012.160934] cat(8919): dirtied inode 15026 (write_accesses_200) on tmpfs
[ 1013.211452] diff(8923): dirtied inode 15040 (dmesg_next) on tmpfs
[ 1013.403982] cat(8942): dirtied inode 15049 (write_accesses_201) on tmpfs
[ 1013.403982] cat(8943): dirtied inode 15058 (read_accesses_201) on tmpfs
[ 1014.599561] dmesg(8945): dirtied inode 15063 (dmesg_next) on tmpfs
[ 1014.605093] cat(8965): dirtied inode 15072 (write_accesses_202) on tmpfs
[ 1015.653317] dmesg(8968): dirtied inode 15086 (dmesg_next) on tmpfs
[ 1015.660059] cat(8988): dirtied inode 15095 (write_accesses_203) on tmpfs
[ 1015.665106] cat(8989): dirtied inode 15104 (read_accesses_203) on tmpfs
[ 1016.665570] dmesg(8991): dirtied inode 15109 (dmesg_next) on tmpfs
[ 1016.675081] cat(9011): dirtied inode 15118 (write_accesses_204) on tmpfs
[ 1017.956111] dmesg(9014): dirtied inode 15132 (dmesg_next) on tmpfs
[ 1017.962127] cat(9034): dirtied inode 15141 (write_accesses_205) on tmpfs
[ 1017.963895] cat(9035): dirtied inode 15150 (read_accesses_205) on tmpfs
[ 1018.969674] diff(9038): dirtied inode 15155 (dmesg_next) on tmpfs
[ 1018.976266] cat(9057): dirtied inode 15164 (write_accesses_206) on tmpfs
[ 1018.976266] cat(9058): dirtied inode 15173 (read_accesses_206) on tmpfs
[ 1020.426869] dmesg(9060): dirtied inode 15178 (dmesg_next) on tmpfs
[ 1020.618849] cat(9081): dirtied inode 15196 (read_accesses_207) on tmpfs
[ 1021.626849] dmesg(9083): dirtied inode 15201 (dmesg_next) on tmpfs
[ 1021.942813] cat(9103): dirtied inode 15210 (write_accesses_208) on tmpfs
[ 1021.942813] cat(9104): dirtied inode 15219 (read_accesses_208) on tmpfs
[ 1022.945266] dmesg(9106): dirtied inode 15224 (dmesg_next) on tmpfs
[ 1022.953861] cat(9126): dirtied inode 15233 (write_accesses_209) on tmpfs
[ 1022.957645] cat(9127): dirtied inode 15242 (read_accesses_209) on tmpfs
[ 1023.963691] diff(9130): dirtied inode 15247 (dmesg_next) on tmpfs
[ 1023.970181] cat(9149): dirtied inode 15256 (write_accesses_210) on tmpfs
[ 1023.970181] cat(9150): dirtied inode 15265 (read_accesses_210) on tmpfs
[ 1025.301905] dmesg(9152): dirtied inode 15270 (dmesg_next) on tmpfs
[ 1026.620938] diff(9176): dirtied inode 15293 (dmesg_next) on tmpfs
[ 1026.628590] cat(9195): dirtied inode 15302 (write_accesses_212) on tmpfs
[ 1026.628590] cat(9196): dirtied inode 15311 (read_accesses_212) on tmpfs
[ 1027.629981] dmesg(9198): dirtied inode 15316 (dmesg_next) on tmpfs
[ 1027.823194] cat(9218): dirtied inode 15325 (write_accesses_213) on tmpfs
[ 1027.823562] cat(9219): dirtied inode 15334 (read_accesses_213) on tmpfs
[ 1028.831105] dmesg(9221): dirtied inode 15339 (dmesg_next) on tmpfs
[ 1029.206013] cat(9241): dirtied inode 15348 (write_accesses_214) on tmpfs
[ 1029.206038] cat(9242): dirtied inode 15357 (read_accesses_214) on tmpfs
[ 1030.396448] dmesg(9244): dirtied inode 15362 (dmesg_next) on tmpfs
[ 1030.401416] cat(9264): dirtied inode 15371 (write_accesses_215) on tmpfs
[ 1030.401416] cat(9265): dirtied inode 15380 (read_accesses_215) on tmpfs
[ 1031.403869] dmesg(9267): dirtied inode 15385 (dmesg_next) on tmpfs
[ 1031.415660] cat(9287): dirtied inode 15394 (write_accesses_216) on tmpfs
[ 1031.415660] cat(9288): dirtied inode 15403 (read_accesses_216) on tmpfs
[ 1032.804163] dmesg(9290): dirtied inode 15408 (dmesg_next) on tmpfs
[ 1033.055856] cat(9310): dirtied inode 15417 (write_accesses_217) on tmpfs
[ 1034.471872] dmesg(9313): dirtied inode 15431 (dmesg_next) on tmpfs
[ 1034.477084] cat(9333): dirtied inode 15440 (write_accesses_218) on tmpfs
[ 1034.484714] cat(9334): dirtied inode 15449 (read_accesses_218) on tmpfs
[ 1035.486685] dmesg(9336): dirtied inode 15454 (dmesg_next) on tmpfs
[ 1035.679219] cat(9356): dirtied inode 15463 (write_accesses_219) on tmpfs
[ 1036.681651] diff(9360): dirtied inode 15477 (dmesg_next) on tmpfs
[ 1037.122902] cat(9379): dirtied inode 15486 (write_accesses_220) on tmpfs
[ 1189.246874] md: md4 stopped.
[ 1189.840012] md: bind<sdb3>
[ 1189.840354] md: bind<sdd3>
[ 1189.840354] md: bind<sde3>
[ 1189.842512] md: bind<sdc3>
[ 1189.842512] md: bind<sdf3>
[ 1189.844013] md: bind<sda3>
[ 1189.875071] raid10: raid set md4 active with 6 out of 6 devices
[ 1198.982375] Filesystem "dm-0": Disabling barriers, not supported by the underlying device
[ 1198.987373] XFS mounting filesystem dm-0
[ 1200.519856] Ending clean XFS mount for filesystem: dm-0
[ 1200.535852] Filesystem "dm-1": Disabling barriers, not supported by the underlying device
[ 1200.587852] XFS mounting filesystem dm-1
[ 1200.977207] Ending clean XFS mount for filesystem: dm-1
[ 1200.987164] ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
[ 1200.987164] ReiserFS: dm-2: using ordered data mode
[ 1201.071161] ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 1201.071640] ReiserFS: dm-2: checking transaction log (dm-2)
[ 1201.125097] ReiserFS: dm-2: Using r5 hash to sort names
[ 1281.909362] mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
[ 1374.622166] r8169: eth0: link up
[ 1385.653696] eth0: no IPv6 routers present
[ 2162.274814] mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
[ 2277.379373] md: md4 stopped.
[ 2277.379428] md: unbind<sda3>
[ 2277.379473] md: export_rdev(sda3)
[ 2277.379522] md: unbind<sdf3>
[ 2277.379565] md: export_rdev(sdf3)
[ 2277.379612] md: unbind<sdc3>
[ 2277.379656] md: export_rdev(sdc3)
[ 2277.379702] md: unbind<sde3>
[ 2277.379745] md: export_rdev(sde3)
[ 2277.379792] md: unbind<sdd3>
[ 2277.379842] md: export_rdev(sdd3)
[ 2277.379890] md: unbind<sdb3>
[ 2277.379933] md: export_rdev(sdb3)
[ 2304.355772] ata6.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.355772] ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.355772] ata4.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.355772] ata4: SError: { PHYRdyChg CommWake }
[ 2304.355772] ata4.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.355772] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.355772] ata4.00: status: { DRDY }
[ 2304.355772] ata4: hard resetting link
[ 2304.896743] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.896743] ata5.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.896743] ata5: SError: { PHYRdyChg CommWake }
[ 2304.896743] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.896743] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.896743] ata5.00: status: { DRDY }
[ 2304.896743] ata5: hard resetting link
[ 2304.896743] ata6.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.896789] ata6: SError: { PHYRdyChg CommWake }
[ 2304.896835] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.896836] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.896939] ata6.00: status: { DRDY }
[ 2304.896984] ata6: hard resetting link
[ 2304.897035] ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.897093] ata3.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.897138] ata3: SError: { PHYRdyChg CommWake }
[ 2304.897184] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.897185] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.897288] ata3.00: status: { DRDY }
[ 2304.897332] ata3: hard resetting link
[ 2304.897381] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 2304.897439] ata2.00: irq_stat 0x00400001, PHY RDY changed
[ 2304.897485] ata2: SError: { PHYRdyChg CommWake }
[ 2304.897530] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2304.897531] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 2304.897634] ata2.00: status: { DRDY }
[ 2304.897679] ata2: hard resetting link
[ 2305.832653] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.832656] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.837489] ata4.00: configured for UDMA/133
[ 2305.837489] ata4: EH complete
[ 2305.837489] ata5.00: configured for UDMA/133
[ 2305.837489] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.837489] sd 3:0:0:0: [sdd] Write Protect is off
[ 2305.837489] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2305.837489] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.837489] ata5: EH complete
[ 2305.837489] sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.837489] sd 4:0:0:0: [sde] Write Protect is off
[ 2305.837489] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2305.837489] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.841497] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.841556] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.841615] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2305.841615] ata3.00: configured for UDMA/133
[ 2305.841615] ata3: EH complete
[ 2305.841615] ata2.00: configured for UDMA/133
[ 2305.841615] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.841615] sd 2:0:0:0: [sdc] Write Protect is off
[ 2305.841615] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2305.841615] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.845240] ata6.00: configured for UDMA/133
[ 2305.845240] ata6: EH complete
[ 2305.841615] ata2: EH complete
[ 2305.841615] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.841615] sd 1:0:0:0: [sdb] Write Protect is off
[ 2305.841615] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2305.841615] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.841694] sd 5:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
[ 2305.845240] sd 5:0:0:0: [sdf] Write Protect is off
[ 2305.845284] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 2305.845299] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2305.852738] end_request: I/O error, dev sdd, sector 19534911
[ 2305.852738] md: super_written gets error=-5, uptodate=0
[ 2305.852738] raid1: Disk failure on sdd1, disabling device.
[ 2305.852738] raid1: Operation continuing on 5 devices.
[ 2305.852738] end_request: I/O error, dev sdf, sector 19534911
[ 2305.852738] md: super_written gets error=-5, uptodate=0
[ 2305.852738] raid1: Disk failure on sdf1, disabling device.
[ 2305.852738] raid1: Operation continuing on 4 devices.
[ 2305.853240] end_request: I/O error, dev sdc, sector 19534911
[ 2305.853240] md: super_written gets error=-5, uptodate=0
[ 2305.853240] raid1: Disk failure on sdc1, disabling device.
[ 2305.853240] raid1: Operation continuing on 3 devices.
[ 2305.841615] end_request: I/O error, dev sde, sector 19534911
[ 2305.841615] md: super_written gets error=-5, uptodate=0
[ 2305.841615] raid1: Disk failure on sde1, disabling device.
[ 2305.841615] raid1: Operation continuing on 2 devices.
[ 2305.857144] end_request: I/O error, dev sdb, sector 19534911
[ 2305.857144] md: super_written gets error=-5, uptodate=0
[ 2305.857144] raid1: Disk failure on sdb1, disabling device.
[ 2305.857144] raid1: Operation continuing on 1 devices.
[ 2305.872898] RAID1 conf printout:
[ 2305.872898] --- wd:1 rd:6
[ 2305.872898] disk 0, wo:0, o:1, dev:sda1
[ 2305.872898] disk 1, wo:1, o:0, dev:sdb1
[ 2305.872898] disk 2, wo:1, o:0, dev:sdd1
[ 2305.872898] disk 3, wo:1, o:0, dev:sde1
[ 2305.872898] disk 4, wo:1, o:0, dev:sdc1
[ 2305.872898] disk 5, wo:1, o:0, dev:sdf1
[ 2305.881242] RAID1 conf printout:
[ 2305.881286] --- wd:1 rd:6
[ 2305.881330] disk 0, wo:0, o:1, dev:sda1
[ 2305.881379] disk 1, wo:1, o:0, dev:sdb1
[ 2305.881423] disk 2, wo:1, o:0, dev:sdd1
[ 2305.881466] disk 3, wo:1, o:0, dev:sde1
[ 2305.881510] disk 4, wo:1, o:0, dev:sdc1
[ 2305.881557] RAID1 conf printout:
[ 2305.881599] --- wd:1 rd:6
[ 2305.881641] disk 0, wo:0, o:1, dev:sda1
[ 2305.881684] disk 1, wo:1, o:0, dev:sdb1
[ 2305.881728] disk 2, wo:1, o:0, dev:sdd1
[ 2305.881772] disk 3, wo:1, o:0, dev:sde1
[ 2305.881815] disk 4, wo:1, o:0, dev:sdc1
[ 2305.893241] RAID1 conf printout:
[ 2305.893285] --- wd:1 rd:6
[ 2305.893328] disk 0, wo:0, o:1, dev:sda1
[ 2305.893376] disk 1, wo:1, o:0, dev:sdb1
[ 2305.893418] disk 2, wo:1, o:0, dev:sdd1
[ 2305.893462] disk 3, wo:1, o:0, dev:sde1
[ 2305.893506] RAID1 conf printout:
[ 2305.893548] --- wd:1 rd:6
[ 2305.893589] disk 0, wo:0, o:1, dev:sda1
[ 2305.893633] disk 1, wo:1, o:0, dev:sdb1
[ 2305.893676] disk 2, wo:1, o:0, dev:sdd1
[ 2305.893719] disk 3, wo:1, o:0, dev:sde1
[ 2305.905242] RAID1 conf printout:
[ 2305.905285] --- wd:1 rd:6
[ 2305.905329] disk 0, wo:0, o:1, dev:sda1
[ 2305.905376] disk 1, wo:1, o:0, dev:sdb1
[ 2305.905418] disk 2, wo:1, o:0, dev:sdd1
[ 2305.905463] RAID1 conf printout:
[ 2305.905505] --- wd:1 rd:6
[ 2305.905546] disk 0, wo:0, o:1, dev:sda1
[ 2305.905590] disk 1, wo:1, o:0, dev:sdb1
[ 2305.905633] disk 2, wo:1, o:0, dev:sdd1
[ 2305.917241] RAID1 conf printout:
[ 2305.917284] --- wd:1 rd:6
[ 2305.917328] disk 0, wo:0, o:1, dev:sda1
[ 2305.917374] disk 1, wo:1, o:0, dev:sdb1
[ 2305.917417] RAID1 conf printout:
[ 2305.917460] --- wd:1 rd:6
[ 2305.917501] disk 0, wo:0, o:1, dev:sda1
[ 2305.917544] disk 1, wo:1, o:0, dev:sdb1
[ 2305.929241] RAID1 conf printout:
[ 2305.929284] --- wd:1 rd:6
[ 2305.929328] disk 0, wo:0, o:1, dev:sda1
[ 2505.989204] md: md3 still in use.
[ 2521.148651] md: unbind<sdc1>
[ 2521.148651] md: export_rdev(sdc1)
[ 2537.045017] md: unbind<sdf1>
[ 2537.045017] md: export_rdev(sdf1)
[ 2537.070370] md: unbind<sde1>
[ 2537.070370] md: export_rdev(sde1)
[ 2537.812473] md: unbind<sdd1>
[ 2537.812524] md: export_rdev(sdd1)
[ 2537.822335] md: unbind<sdb1>
[ 2537.822335] md: export_rdev(sdb1)
[ 2565.680914] md: bind<sdf1>
[ 2565.722761] RAID1 conf printout:
[ 2565.722761] --- wd:1 rd:6
[ 2565.722761] disk 0, wo:0, o:1, dev:sda1
[ 2565.722761] disk 1, wo:1, o:1, dev:sdf1
[ 2565.724253] md: recovery of RAID array md3
[ 2565.724253] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 2565.724253] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 2565.724253] md: using 128k window, over a total of 9767424 blocks.
[ 2565.876674] md: bind<sde1>
[ 2565.995415] md: bind<sdd1>
[ 2566.057634] md: bind<sdb1>
[ 2566.101549] md: bind<sdc1>
[ 2782.657615] md: md3: recovery done.
[ 2783.368035] RAID1 conf printout:
[ 2783.368035] --- wd:2 rd:6
[ 2783.368035] disk 0, wo:0, o:1, dev:sda1
[ 2783.368035] disk 1, wo:0, o:1, dev:sdf1
[ 2783.555376] RAID1 conf printout:
[ 2783.555423] --- wd:2 rd:6
[ 2783.555467] disk 0, wo:0, o:1, dev:sda1
[ 2783.555533] disk 1, wo:0, o:1, dev:sdf1
[ 2783.555576] disk 2, wo:1, o:1, dev:sdc1
[ 2783.555625] RAID1 conf printout:
[ 2783.555667] --- wd:2 rd:6
[ 2783.555708] disk 0, wo:0, o:1, dev:sda1
[ 2783.555751] disk 1, wo:0, o:1, dev:sdf1
[ 2783.555794] disk 2, wo:1, o:1, dev:sdc1
[ 2783.555837] disk 3, wo:1, o:1, dev:sdb1
[ 2783.555882] RAID1 conf printout:
[ 2783.555924] --- wd:2 rd:6
[ 2783.555966] disk 0, wo:0, o:1, dev:sda1
[ 2783.559532] disk 1, wo:0, o:1, dev:sdf1
[ 2783.559532] disk 2, wo:1, o:1, dev:sdc1
[ 2783.559532] disk 3, wo:1, o:1, dev:sdb1
[ 2783.559532] disk 4, wo:1, o:1, dev:sdd1
[ 2783.559532] RAID1 conf printout:
[ 2783.559532] --- wd:2 rd:6
[ 2783.559532] disk 0, wo:0, o:1, dev:sda1
[ 2783.559532] disk 1, wo:0, o:1, dev:sdf1
[ 2783.559532] disk 2, wo:1, o:1, dev:sdc1
[ 2783.559532] disk 3, wo:1, o:1, dev:sdb1
[ 2783.559532] disk 4, wo:1, o:1, dev:sdd1
[ 2783.559532] disk 5, wo:1, o:1, dev:sde1
[ 2783.559532] md: recovery of RAID array md3
[ 2783.559532] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 2783.559532] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 2783.559532] md: using 128k window, over a total of 9767424 blocks.
[ 2977.087799] ata1.00: exception Emask 0x10 SAct 0x7 SErr 0x50000 action 0xe frozen
[ 2977.087860] ata1.00: irq_stat 0x00400008, PHY RDY changed
[ 2977.087908] ata1: SError: { PHYRdyChg CommWake }
[ 2977.087957] ata1.00: cmd 60/80:00:bf:d8:dc/00:00:00:00:00/40 tag 0 ncq 65536 in
[ 2977.087958] res 40/00:14:bf:d9:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2977.088077] ata1.00: status: { DRDY }
[ 2977.088123] ata1.00: cmd 60/80:08:3f:d9:dc/00:00:00:00:00/40 tag 1 ncq 65536 in
[ 2977.088124] res 40/00:14:bf:d9:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2977.088245] ata1.00: status: { DRDY }
[ 2977.088292] ata1.00: cmd 60/80:10:bf:d9:dc/00:00:00:00:00/40 tag 2 ncq 65536 in
[ 2977.088293] res 40/00:14:bf:d9:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2977.088412] ata1.00: status: { DRDY }
[ 2977.088462] ata1: hard resetting link
[ 2977.107904] ata4.00: exception Emask 0x10 SAct 0x20 SErr 0x10000 action 0xe frozen
[ 2977.107904] ata4.00: irq_stat 0x00400008, PHY RDY changed
[ 2977.107904] ata4: SError: { PHYRdyChg }
[ 2977.107904] ata4.00: cmd 61/00:28:bf:d7:dc/01:00:00:00:00/40 tag 5 ncq 131072 out
[ 2977.107904] res 40/00:2c:bf:d7:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2977.107904] ata4.00: status: { DRDY }
[ 2977.107904] ata4: hard resetting link
[ 2977.973953] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2977.973943] ata1.00: configured for UDMA/133
[ 2977.973943] ata1: EH complete
[ 2977.978160] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
[ 2977.978160] sd 0:0:0:0: [sda] Write Protect is off
[ 2977.978160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2977.978160] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2977.978160] ata5.00: exception Emask 0x10 SAct 0x3 SErr 0x50000 action 0xe frozen
[ 2978.028686] ata3.00: exception Emask 0x10 SAct 0x3 SErr 0x50000 action 0xe frozen
[ 2978.028686] ata3.00: irq_stat 0x00400008, PHY RDY changed
[ 2978.028686] ata3: SError: { PHYRdyChg CommWake }
[ 2978.028686] ata3.00: cmd 61/80:00:bf:d8:dc/00:00:00:00:00/40 tag 0 ncq 65536 out
[ 2978.028686] res 40/00:0c:3f:d9:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2978.028686] ata3.00: status: { DRDY }
[ 2978.028686] ata3.00: cmd 61/80:08:3f:d9:dc/00:00:00:00:00/40 tag 1 ncq 65536 out
[ 2978.028686] res 40/00:0c:3f:d9:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2978.028686] ata3.00: status: { DRDY }
[ 2978.028686] ata3: hard resetting link
[ 2977.978160] ata5.00: irq_stat 0x00400008, PHY RDY changed
[ 2977.978160] ata5: SError: { PHYRdyChg CommWake }
[ 2977.978160] ata5.00: cmd 61/80:00:bf:d8:dc/00:00:00:00:00/40 tag 0 ncq 65536 out
[ 2977.978160] res 40/00:0c:3f:d9:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2977.978160] ata5.00: status: { DRDY }
[ 2977.978160] ata5.00: cmd 61/80:08:3f:d9:dc/00:00:00:00:00/40 tag 1 ncq 65536 out
[ 2977.978160] res 40/00:0c:3f:d9:dc/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 2977.978160] ata5.00: status: { DRDY }
[ 2977.978160] ata5: hard resetting link
[ 2978.034941] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2978.039874] ata4.00: configured for UDMA/133
[ 2978.039874] ata4: EH complete
[ 2978.039874] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
[ 2978.039874] sd 3:0:0:0: [sdd] Write Protect is off
[ 2978.039874] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2978.039874] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2978.914449] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2978.915221] ata5.00: configured for UDMA/133
[ 2978.915221] ata5: EH complete
[ 2978.915221] sd 4:0:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
[ 2978.915221] sd 4:0:0:0: [sde] Write Protect is off
[ 2978.915221] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2978.915221] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2978.922939] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2978.922929] ata3.00: configured for UDMA/133
[ 2978.922929] ata3: EH complete
[ 2978.915221] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
[ 2978.915221] sd 2:0:0:0: [sdc] Write Protect is off
[ 2978.915221] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2978.915221] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3046.343693] md: md3: recovery done.
[ 3046.387694] ata6.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[ 3046.387694] ata6.00: irq_stat 0x00400001, PHY RDY changed
[ 3046.387694] ata6: SError: { PHYRdyChg CommWake }
[ 3046.387694] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 3046.387694] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 3046.387694] ata6.00: status: { DRDY }
[ 3046.387694] ata6: hard resetting link
[ 3047.561017] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3047.613497] ata6.00: configured for UDMA/133
[ 3047.613497] ata6: EH complete
[ 3047.613497] sd 5:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB)
[ 3047.613497] sd 5:0:0:0: [sdf] Write Protect is off
[ 3047.613497] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3047.613497] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3047.613497] end_request: I/O error, dev sdf, sector 19534911
[ 3047.613497] md: super_written gets error=-5, uptodate=0
[ 3047.613497] raid1: Disk failure on sdf1, disabling device.
[ 3047.613497] raid1: Operation continuing on 1 devices.
[ 3047.645706] RAID1 conf printout:
[ 3047.645706] --- wd:1 rd:6
[ 3047.645706] disk 0, wo:0, o:1, dev:sda1
[ 3047.645706] disk 1, wo:1, o:0, dev:sdf1
[ 3047.645706] disk 2, wo:1, o:1, dev:sdc1
[ 3047.645706] disk 3, wo:1, o:1, dev:sdb1
[ 3047.645706] disk 4, wo:1, o:1, dev:sdd1
[ 3047.645733] disk 5, wo:1, o:1, dev:sde1
[ 3047.646775] RAID1 conf printout:
[ 3047.646817] --- wd:1 rd:6
[ 3047.646858] disk 0, wo:0, o:1, dev:sda1
[ 3047.646902] disk 1, wo:1, o:0, dev:sdf1
[ 3047.646945] disk 2, wo:1, o:1, dev:sdc1
[ 3047.646988] disk 3, wo:1, o:1, dev:sdb1
[ 3047.647031] disk 4, wo:1, o:1, dev:sdd1
[ 3047.647074] disk 5, wo:1, o:1, dev:sde1
[ 3047.647117] RAID1 conf printout:
[ 3047.647159] --- wd:1 rd:6
[ 3047.654048] disk 0, wo:0, o:1, dev:sda1
[ 3047.654091] disk 1, wo:1, o:0, dev:sdf1
[ 3047.654134] disk 2, wo:1, o:1, dev:sdc1
[ 3047.654177] disk 3, wo:1, o:1, dev:sdb1
[ 3047.654220] disk 4, wo:1, o:1, dev:sdd1
[ 3047.654263] disk 5, wo:1, o:1, dev:sde1
[ 3047.654306] RAID1 conf printout:
[ 3047.654348] --- wd:1 rd:6
[ 3047.654390] disk 0, wo:0, o:1, dev:sda1
[ 3047.654433] disk 1, wo:1, o:0, dev:sdf1
[ 3047.654476] disk 2, wo:1, o:1, dev:sdc1
[ 3047.654519] disk 3, wo:1, o:1, dev:sdb1
[ 3047.654568] disk 4, wo:1, o:1, dev:sdd1
[ 3047.654611] disk 5, wo:1, o:1, dev:sde1
[ 3047.654654] RAID1 conf printout:
[ 3047.654696] --- wd:1 rd:6
[ 3047.654738] disk 0, wo:0, o:1, dev:sda1
[ 3047.654781] disk 1, wo:1, o:0, dev:sdf1
[ 3047.654825] disk 2, wo:1, o:1, dev:sdc1
[ 3047.654867] disk 3, wo:1, o:1, dev:sdb1
[ 3047.654911] disk 4, wo:1, o:1, dev:sdd1
[ 3047.654953] disk 5, wo:1, o:1, dev:sde1
[ 3047.654996] RAID1 conf printout:
[ 3047.655039] --- wd:1 rd:6
[ 3047.655080] disk 0, wo:0, o:1, dev:sda1
[ 3047.655123] disk 1, wo:1, o:0, dev:sdf1
[ 3047.655167] disk 2, wo:1, o:1, dev:sdc1
[ 3047.655209] disk 3, wo:1, o:1, dev:sdb1
[ 3047.655252] disk 4, wo:1, o:1, dev:sdd1
[ 3047.655296] disk 5, wo:1, o:1, dev:sde1
[ 3047.655338] RAID1 conf printout:
[ 3047.655380] --- wd:1 rd:6
[ 3047.655422] disk 0, wo:0, o:1, dev:sda1
[ 3047.655465] disk 1, wo:1, o:0, dev:sdf1
[ 3047.655508] disk 2, wo:1, o:1, dev:sdc1
[ 3047.655551] disk 3, wo:1, o:1, dev:sdb1
[ 3047.655594] disk 4, wo:1, o:1, dev:sdd1
[ 3047.655637] disk 5, wo:1, o:1, dev:sde1
[ 3047.655637] RAID1 conf printout:
[ 3047.655637] --- wd:1 rd:6
[ 3047.655637] disk 0, wo:0, o:1, dev:sda1
[ 3047.655637] disk 1, wo:1, o:0, dev:sdf1
[ 3047.655637] disk 2, wo:1, o:1, dev:sdc1
[ 3047.655637] disk 3, wo:1, o:1, dev:sdb1
[ 3047.655637] disk 4, wo:1, o:1, dev:sdd1
[ 3047.655637] disk 5, wo:1, o:1, dev:sde1
[ 3047.655637] RAID1 conf printout:
[ 3047.655637] --- wd:1 rd:6
[ 3047.655637] disk 0, wo:0, o:1, dev:sda1
[ 3047.655637] disk 1, wo:1, o:0, dev:sdf1
[ 3047.655637] disk 2, wo:1, o:1, dev:sdc1
[ 3047.655637] disk 3, wo:1, o:1, dev:sdb1
[ 3047.655637] disk 4, wo:1, o:1, dev:sdd1
[ 3047.655637] disk 5, wo:1, o:1, dev:sde1
[ 3047.664791] RAID1 conf printout:
[ 3047.664835] --- wd:1 rd:6
[ 3047.664878] disk 0, wo:0, o:1, dev:sda1
[ 3047.664926] disk 2, wo:1, o:1, dev:sdc1
[ 3047.664969] disk 3, wo:1, o:1, dev:sdb1
[ 3047.665011] disk 4, wo:1, o:1, dev:sdd1
[ 3047.665055] disk 5, wo:1, o:1, dev:sde1
[ 3047.666439] md: recovery of RAID array md3
[ 3047.666439] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 3047.666439] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 3047.666439] md: using 128k window, over a total of 9767424 blocks.
[ 3047.666439] md: resuming recovery of md3 from checkpoint.
[ 3047.666439] md: md3: recovery done.
[ 3047.677522] RAID1 conf printout:
[ 3047.681637] --- wd:5 rd:6
[ 3047.681679] disk 0, wo:0, o:1, dev:sda1
[ 3047.681722] disk 2, wo:0, o:1, dev:sdc1
[ 3047.681765] disk 3, wo:0, o:1, dev:sdb1
[ 3047.681808] disk 4, wo:0, o:1, dev:sdd1
[ 3047.681851] disk 5, wo:0, o:1, dev:sde1

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26
# Thu Aug 28 10:24:09 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_PARAVIRT_GUEST=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_MEMTEST_BOOTPARAM=y
CONFIG_MEMTEST_BOOTPARAM_VALUE=0
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_X86_PAT is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_WMI=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=m
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set

#
# Selecting 'y' for an algorithm will
#

#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set

#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_MSI_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=m
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
CONFIG_DM_MULTIPATH_RDAC=m
CONFIG_DM_MULTIPATH_HP=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_SFC=m
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_USB_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
CONFIG_IWL4965=m
CONFIG_IWL4965_HT=y
CONFIG_IWL4965_LEDS=y
CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
CONFIG_IWL4965_SENSITIVITY=y
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWL3945=m
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2400PCI=m
CONFIG_RT2400PCI_RFKILL=y
CONFIG_RT2400PCI_LEDS=y
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
CONFIG_RT2500PCI_LEDS=y
CONFIG_RT61PCI=m
CONFIG_RT61PCI_RFKILL=y
CONFIG_RT61PCI_LEDS=y
CONFIG_RT2500USB=m
CONFIG_RT2500USB_LEDS=y
CONFIG_RT73USB=m
CONFIG_RT73USB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y

#
# Cyclades-PC300 MLPPP support is disabled.
#

#
# Refer to the file README.mlppp, provided by PC300 package.
#
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=m

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_PLATFORM=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=m
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
CONFIG_IT8712F_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_IMAC is not set
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_GEODE is not set
CONFIG_FB_SM501=m
CONFIG_FB_VIRTUAL=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PROGEAR=m

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y

#
# Generic devices
#
CONFIG_SND_PCSP=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m

#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS5530=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# SPI devices
#

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y

#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# ALSA SoC audio for Freescale SOCs
#

#
# SoC Audio for the Texas Instruments OMAP
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_PANTHERLORD_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1760_PCI is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_CLEVO_MAIL=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I5000=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_SMX=m

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Paul E. McKenney: "Re: [PATCH, RFC, tip/core/rcu] v3 scalable classic RCUimplementation"
Previous message: Carsten Emde: "Re: 2.6.26.3-rt3 bug report"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]