Re: 2.6.27-rc1: critical thermal shutdown on thinkpad x60

From: Henrique de Moraes Holschuh
Date: Wed Aug 13 2008 - 16:43:09 EST


On Wed, 13 Aug 2008, Pavel Machek wrote:
> On Wed 2008-08-13 17:13:59, Henrique de Moraes Holschuh wrote:
> > On Tue, 12 Aug 2008, Pavel Machek wrote:
> > > > Now, the CPU cores remains on 1.67GHz and fan is unable to cool them properly
> > > > under heavy load (even if I set "level disengaged" through thinkpad fan control,
> > > > temperature sensor shows after a while 128 C (probably not real temp,
> > > > I expect some critical flag => and it properly switch off the
> > > > system...)
> > >
> > > How do you control fans? I could not get anything but -EINVAL from IBM
> > > ACPI driver :-(.
> >
> > thinkpad-acpi will regard 128 and -128 as invalid sensors, because that's
> > how they are used in some BIOSes (and ECs). We used to bother only with
> > -128, but Lenovo did something wierd in one of the EC firmwares and I had to
> > add +128 too. That masks the "help, I am melting" reading.
>
> It was simpler than that. I did not pass "fan_control=1" option.
>
> (Actually... I do not think that option is needed. If fan control is
> known to work, it should be just enabled...)

I require explicit user permission to activate knobs that are that
dangerous, and actively frowned upon by the manufacturer.

--
"One disk to rule them all, One disk to find them. One disk to bring
them all and in the darkness grind them. In the Land of Redmond
where the shadows lie." -- The Silicon Valley Tarot
Henrique Holschuh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/