Re: [RFC PATCH] cleanup Serial ATA and Parallel ATA Kconfig try3

From: Grant Coady
Date: Sun Aug 10 2008 - 03:32:48 EST

Next message: Yinghai Lu: "[PATCH 00/43] dyn_array/nr_irqs/sparse_irq support v7"
Previous message: Cyrill Gorcunov: "Re: Programming the apic when no external to cpu timer is present?"
In reply to: Grant Coady: "[RFC PATCH] cleanup Serial ATA and Parallel ATA Kconfig try3"
Next in thread: Grant Coady: "[RFC PATCH] cleanup Serial ATA and Parallel ATA Kconfig try4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I'm sorry, please ignore this patch, it's busted :( Tomorrow...

On Sun, 10 Aug 2008 17:10:17 +1000, Grant Coady <grant_lkml@xxxxxxxxxxx> wrote:

>On Sun, 10 Aug 2008 11:07:30 +1000, Grant Coady <grant_lkml@xxxxxxxxxxx> wrote:
>
>Okay, third time lucky? This one brings back the indentation and is
>smaller than the last patch too.
>
>Grant.
>
>
>From: Grant Coady <gcoady.lk@xxxxxxxxx>
>
>Cleanup ATA Kconfig, this patch replaces earlier RFC patches.
>
>Cleanup ATA Kconfig, hide the SFF option behind new PATA and SATA menu
>items, sort drivers into a single list, add missing "if unsure, say..."
>help text, this version gets the items indented in make menuconfig, some
>inconsistent text resolved, and one long (>80 col) help line split.
>
>Signed-off-by: Grant Coady <gcoady.lk@xxxxxxxxx>
>
>---
> Kconfig | 157 ++++++++++++++++------------------------------------------------
> 1 files changed, 40 insertions(+), 117 deletions(-)
>
>--- linux-2.6.27-rc2/drivers/ata/Kconfig 2008-07-14 07:51:29.000000000 +1000
>+++ linux-2.6.27-rc2d/drivers/ata/Kconfig 2008-08-10 17:05:01.906675949 +1000
>@@ -73,155 +73,78 @@
>
> If unsure, say N.
>
>-config ATA_SFF
>- bool "ATA SFF support"
>+config SATA_PMP
>+ bool "SATA Port Multiplier support"
> default y
> help
>- This option adds support for ATA controllers with SFF
>- compliant or similar programming interface.
>-
>- SFF is the legacy IDE interface that has been around since
>- the dawn of time. Almost all PATA controllers have an
>- SFF interface. Many SATA controllers have an SFF interface
>- when configured into a legacy compatibility mode.
>-
>- For users with exclusively modern controllers like AHCI,
>- Silicon Image 3124, or Marvell 6440, you may choose to
>- disable this uneeded SFF support.
>+ This option adds support for SATA Port Multipliers
>+ (the SATA version of an ethernet hub, or SAS expander).
>
> If unsure, say Y.
>
>-if ATA_SFF
>-
>-config SATA_SVW
>- tristate "ServerWorks Frodo / Apple K2 SATA support"
>- depends on PCI
>- help
>- This option enables support for Broadcom/Serverworks/Apple K2
>- SATA support.
>-
>- If unsure, say N.
>-
>-config ATA_PIIX
>- tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
>- depends on PCI
>- help
>- This option enables support for ICH5/6/7/8 Serial ATA
>- and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
>- host controllers.
>-
>- If unsure, say N.
>-
>-config SATA_MV
>- tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
>- depends on EXPERIMENTAL
>- help
>- This option enables support for the Marvell Serial ATA family.
>- Currently supports 88SX[56]0[48][01] chips.
>-
>- If unsure, say N.
>-
>-config SATA_NV
>- tristate "NVIDIA SATA support"
>+config SATA_SIL24
>+ tristate "Silicon Image 3124/3132 SATA support"
> depends on PCI
> help
>- This option enables support for NVIDIA Serial ATA.
>+ This option enables support for Silicon Image 3124/3132 Serial ATA.
>
> If unsure, say N.
>
>-config PDC_ADMA
>- tristate "Pacific Digital ADMA support"
>- depends on PCI
>- help
>- This option enables support for Pacific Digital ADMA controllers
>-
>- If unsure, say N.
>-
>-config SATA_QSTOR
>- tristate "Pacific Digital SATA QStor support"
>- depends on PCI
>- help
>- This option enables support for Pacific Digital Serial ATA QStor.
>-
>- If unsure, say N.
>-
>-config SATA_PROMISE
>- tristate "Promise SATA TX2/TX4 support"
>- depends on PCI
>- help
>- This option enables support for Promise Serial ATA TX2/TX4.
>-
>- If unsure, say N.
>-
>-config SATA_SX4
>- tristate "Promise SATA SX4 support"
>- depends on PCI && EXPERIMENTAL
>+config ATA_SFF_PATA
>+ bool "Parallel ATA (PATA) support"
>+ default y
> help
>- This option enables support for Promise Serial ATA SX4.
>-
>- If unsure, say N.
>+ Say Y here if you want support for Parallel ATA (PATA) devices,
>+ also known as IDE devices.
>
>-config SATA_SIL
>- tristate "Silicon Image SATA support"
>- depends on PCI
>- help
>- This option enables support for Silicon Image Serial ATA.
>+ This option enables a list of available PATA drivers.
>
>- If unsure, say N.
>+ You may turn this option off if running AHCI or similar devices.
>
>-config SATA_SIS
>- tristate "SiS 964/965/966/180 SATA support"
>- depends on PCI
>- select PATA_SIS
>- help
>- This option enables support for SiS Serial ATA on
>- SiS 964/965/966/180 and Parallel ATA on SiS 180.
>- The PATA support for SiS 180 requires additionally to
>- enable the PATA_SIS driver in the config.
>- If unsure, say N.
>+ If unsure, say Y.
>
>-config SATA_ULI
>- tristate "ULi Electronics SATA support"
>- depends on PCI
>+config ATA_SFF_SATA
>+ bool "Serial ATA (SATA) support"
>+ default y
> help
>- This option enables support for ULi Electronics SATA.
>+ Say Y here if you want support for Serial ATA (SATA) devices.
>
>- If unsure, say N.
>+ This option enables a list of available SATA drivers.
>
>-config SATA_VIA
>- tristate "VIA SATA support"
>- depends on PCI
>- help
>- This option enables support for VIA Serial ATA.
>+ You may turn this option off if running AHCI or similar devices.
>
>- If unsure, say N.
>-
>-config SATA_VITESSE
>- tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
>- depends on PCI
>- help
>- This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
>+ If unsure, say Y.
>
>- If unsure, say N.
>+config ATA_SFF
>+ bool
>+ default y
>+ depends on ATA_SFF_PATA || ATA_SFF_SATA
>
>-config SATA_INIC162X
>- tristate "Initio 162x SATA support"
>- depends on PCI
>- help
>- This option enables support for Initio 162x Serial ATA.
>+if ATA_SFF
>
> config PATA_ACPI
> tristate "ACPI firmware driver for PATA"
>- depends on ATA_ACPI
>+ depends on ATA_ACPI && ATA_SFF_PATA
> help
> This option enables an ACPI method driver which drives
> motherboard PATA controller interfaces through the ACPI
> firmware in the BIOS. This driver can sometimes handle
> otherwise unsupported hardware.
>
>+ If unsure, say Y.
>+
>+config PATA_ICSIDE
>+ tristate "Acorn ICS PATA support"
>+ depends on ARM && ARCH_ACORN && ATA_SFF_PATA
>+ help
>+ On Acorn systems, say Y here if you wish to use the ICS PATA
>+ interface card. This is not required for ICS partition support.
>+
>+ If unsure, say N.
>+
> config PATA_ALI
> tristate "ALi PATA support (Experimental)"
>- depends on PCI && EXPERIMENTAL
>+ depends on PCI && ATA_SFF_PATA && EXPERIMENTAL
> help
> This option enables support for the ALi ATA interfaces
> found on the many ALi chipsets.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Yinghai Lu: "[PATCH 00/43] dyn_array/nr_irqs/sparse_irq support v7"
Previous message: Cyrill Gorcunov: "Re: Programming the apic when no external to cpu timer is present?"
In reply to: Grant Coady: "[RFC PATCH] cleanup Serial ATA and Parallel ATA Kconfig try3"
Next in thread: Grant Coady: "[RFC PATCH] cleanup Serial ATA and Parallel ATA Kconfig try4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]