Re: [PATCH 1/2] pata_legacy: export functionality to ide

From: Borislav Petkov
Date: Wed Aug 06 2008 - 02:16:53 EST


On Tue, Aug 05, 2008 at 04:41:54PM +0200, Bartlomiej Zolnierkiewicz wrote:
> On Tue, Aug 5, 2008 at 4:32 PM, Boris Petkov <petkovbb@xxxxxxxxxxxxxx> wrote:
>
> [...]
>
> > Will look into it later and redo the patch, thanks for reviewing. I
> > still haven't heard from
> > Bart, though, whether he's OK with the code duplication...?
>
> Given Alan & Jeff concerns about moving it to <linux/ata.h>, just
> copying the function to ide_generic seems like a best solution for now.

---
From: Borislav Petkov <petkovbb@xxxxxxxxx>
Date: Sun, 3 Aug 2008 18:46:35 +0200
Subject: [PATCH] ide-generic: handle probing of legacy io-ports v4

Avoid probing the io-ports in case an IDE PCI controller is present and it uses
the legacy iobases. If we still want to enforce the probing, we do

ide_generic.probe_mask=0x3f

on the kernel command line. The iobase checking code is adapted from
drivers/ata/pata_legacy.c after converting hex pci ids into their corresponding
macros in <linux/pci_ids.h>.

CC: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Signed-off-by: Borislav Petkov <petkovbb@xxxxxxxxx>
---
drivers/ide/ide-generic.c | 59 +++++++++++++++++++++++++++++++++++++++++---
1 files changed, 55 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 8fe8b5b..efce159 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>
+#include <linux/pci_ids.h>

/* FIXME: convert m32r to use ide_platform host driver */
#ifdef CONFIG_M32R
@@ -27,7 +28,7 @@

#define DRV_NAME "ide_generic"

-static int probe_mask = 0x03;
+static int probe_mask;
module_param(probe_mask, int, 0);
MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");

@@ -100,19 +101,69 @@ static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
static const int legacy_irqs[] = { 14, 15, 11, 10, 8, 12 };
#endif

+static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)
+{
+ struct pci_dev *p = NULL;
+ u16 val;
+
+ for_each_pci_dev(p) {
+ int r;
+
+ for (r = 0; r < 6; r++) {
+ if (pci_resource_start(p, r) == 0x1f0)
+ *primary = 1;
+ if (pci_resource_start(p, r) == 0x170)
+ *secondary = 1;
+ }
+
+ /* Cyrix CS55{1,2}0 pre SFF MWDMA ATA on the bridge */
+ if (p->vendor == PCI_VENDOR_ID_CYRIX &&
+ (p->device == PCI_DEVICE_ID_CYRIX_5510 ||
+ p->device == PCI_DEVICE_ID_CYRIX_5520))
+ *primary = *secondary = 1;
+
+ /* Intel MPIIX - PIO ATA on non PCI side of bridge */
+ if (p->vendor == PCI_VENDOR_ID_INTEL &&
+ p->device == PCI_DEVICE_ID_INTEL_82371MX) {
+
+ pci_read_config_word(p, 0x6C, &val);
+ if (val & 0x8000) {
+ /* ATA port enabled */
+ if (val & 0x4000)
+ *secondary = 1;
+ else
+ *primary = 1;
+ }
+ }
+ }
+}
+
static int __init ide_generic_init(void)
{
hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
struct ide_host *host;
unsigned long io_addr;
- int i, rc;
+ int i, rc, primary = 0, secondary = 0;

#ifdef CONFIG_MIPS
if (!ide_probe_legacy())
return -ENODEV;
#endif
- printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
- "parameter for probing all legacy ISA IDE ports\n");
+ ide_generic_check_pci_legacy_iobases(&primary, &secondary);
+
+ if (!probe_mask) {
+ printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" "
+ "module parameter for probing all legacy ISA IDE ports\n");
+
+ if (primary == 0)
+ probe_mask |= 0x1;
+
+ if (secondary == 0)
+ probe_mask |= 0x2;
+ } else {
+ printk(KERN_WARNING "%s: enforcing probing of io ports upon "
+ "user request.\n", DRV_NAME);
+ }

memset(hws, 0, sizeof(hw_regs_t *) * MAX_HWIFS);

--
1.5.5.4


--
Regards/Gruss,
Boris.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/