[PATCH 21/30] W1: ds2490.c ds_write_bit, grouping error, disable readback

[David Fries]

ds_write_bit doesn't read the input buffer, so add COMM_ICP and a
comment that it will no longer generate a read back data byte.  If
there is an extra data byte later on then it will cause an error and
discard what data was there.  Corrected operator ordering for
ds_send_control.

Signed-off-by: David Fries <david@xxxxxxxxx>
Signed-off-by: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
---
 drivers/w1/masters/ds2490.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 6b188e8..6fabf58 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -525,7 +525,12 @@ static int ds_write_bit(struct ds_device *dev, u8 bit)
 	int err;
 	struct ds_status st;
 
-	err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0);
+	/* Set COMM_ICP to write without a readback.  Note, this will
+	 * produce one time slot, a down followed by an up with COMM_D
+	 * only determing the timing.
+	 */
+	err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_ICP |
+		(bit ? COMM_D : 0), 0);
 	if (err)
 		return err;
 
-- 
1.4.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/