Re: BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1

[Matthew Frost]

--- Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:

> On Tue, 29 Jul 2008, James Bottomley wrote:
> 
> > > Summary:
> > > Between 2.6.26-rc9-git10 and rc9-git11, the kernel stopped properly
> > > recognizing my USB-card-reader-mounted SDHC 4GB card.  The problem
> seems to
> > > come up between usb-storage recognizing the device, and the handoff to
> scsi
> > > to read the disk properties.  The bug remains in 2.6.26 and 2.6.27-rc1;
> > > kernels before 2.6.26-rc9-git10 are unaffected.  On the same EHCI
> controller,
> > > an old-spec SD 1GB card and its reader are unaffected by this bug.
> 
> > > After the bug, initialization looks the same until the device scan
> finishes. 
> > > Handoff to scsi produces the following (taken from rc9-git12):
> 
> > > sd 5:0:0:0: [sdf] Sector size 0 reported, assuming 512.
> > > sd 5:0:0:0: [sdf] 1 512-byte hardware sectors (0 MB)
> > > sd 5:0:0:0: [sdf] Write Protect is off
> > > sd 5:0:0:0: [sdf] Mode Sense: 4b 00 00 08
> > > sd 5:0:0:0: [sdf] Assuming drive cache: write through
> > > sd 5:0:0:0: [sdf] Sector size 0 reported, assuming 512.
> > > sd 5:0:0:0: [sdf] 1 512-byte hardware sectors (0 MB)
> > > sd 5:0:0:0: [sdf] Write Protect is off
> > > sd 5:0:0:0: [sdf] Mode Sense: 4b 00 00 08
> > > sd 5:0:0:0: [sdf] Assuming drive cache: write through
> > >  sdf: sdf1
> > >  sdf: p1 exceeds device capacity
> > > sd 5:0:0:0: [sdf] Attached SCSI removable disk
> > > sd 5:0:0:0: Attached scsi generic sg7 type 0
> 
> The problem will most likely be fixed by this patch:
> 
> 	http://marc.info/?l=linux-usb&m=121734710306509&w=2
> 
> Alan Stern
> 
> 

Thanks.  Giving it a try now.

Matt Frost
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/