[patch 8/9] [PATCH 8/9] x86: Major refactoring.

From: Peter Oruba
Date: Fri Jul 25 2008 - 12:19:30 EST


Refactored code by introducing a two-module solution. There is one
general module in which vendor specific modules can hook into.
However, that is exclusive, there is only one vendor specific module
allowed at a time. A CPU vendor check makes sure only the corect
module for the underlying system gets called. Functinally in terms
of patch loading itself there are no changes. This refactoring
provides a basis for future implementations of other vendors'
patch loaders.

Signed-off-by: Peter Oruba <peter.oruba@xxxxxxx>
---
arch/x86/Kconfig | 24 +++++++++--
arch/x86/kernel/Makefile | 4 +-
arch/x86/kernel/microcode.c | 80 +++++++++++++++++++++---------------
arch/x86/kernel/microcode_intel.c | 54 ++++++++++++++++++++-----
4 files changed, 112 insertions(+), 50 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 03980cb..ece1e27 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -782,7 +782,7 @@ config X86_REBOOTFIXUPS
Say N otherwise.

config MICROCODE
- tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ tristate "/dev/cpu/microcode - microcode support"
select FW_LOADER
---help---
If you say Y here, you will be able to update the microcode on
@@ -791,14 +791,28 @@ config MICROCODE
actual microcode binary data itself which is not shipped with the
Linux kernel.

- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ This option selects the general module only, you need to select
+ at least one vendor specific module as well.

To compile this driver as a module, choose M here: the
module will be called microcode.

-config MICROCODE_OLD_INTERFACE
+config MICROCODE_INTEL
+ tristate "Intel microcode patch loading support"
+ depends on MICROCODE
+ select FW_LOADER
+ --help---
+ This options enables microcode patch loading support for Intel
+ processors.
+
+ For latest news and information on obtaining all the required
+ Intel ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
+
+ This driver is only available as a module: the module
+ will be called microcode_intel.
+
+ config MICROCODE_OLD_INTERFACE
def_bool y
depends on MICROCODE

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index abb32ae..f2f9f6d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -51,8 +51,8 @@ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
-obj-$(CONFIG_MICROCODE) += ucode.o
-ucode-objs := microcode.o microcode_intel.o
+obj-$(CONFIG_MICROCODE) += microcode.o
+obj-$(CONFIG_MICROCODE_INTEL) += microcode_intel.o
obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 72b899c..f6414bc 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -99,25 +99,22 @@ MODULE_DESCRIPTION("Microcode Update Driver");
MODULE_AUTHOR("Tigran Aivazian <tigran@xxxxxxxxxxxxxxxxxxxx>");
MODULE_LICENSE("GPL");

-#define MICROCODE_VERSION "1.14a"
+#define MICROCODE_VERSION "2.00"

-/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
-DEFINE_MUTEX(microcode_mutex);
+struct microcode_ops *microcode_ops;

-struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
+/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+static DEFINE_MUTEX(microcode_mutex);
+EXPORT_SYMBOL_GPL(microcode_mutex);

-extern long get_next_ucode(void **mc, long offset);
-extern int microcode_sanity_check(void *mc);
-extern int get_matching_microcode(void *mc, int cpu);
-extern void collect_cpu_info(int cpu_num);
-extern int cpu_request_microcode(int cpu);
-extern void microcode_fini_cpu(int cpu);
-extern void apply_microcode(int cpu);
-extern int apply_microcode_check_cpu(int cpu);
+static struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
+EXPORT_SYMBOL_GPL(ucode_cpu_info);

#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-void __user *user_buffer; /* user area microcode data buffer */
-unsigned int user_buffer_size; /* it's size */
+static void __user *user_buffer; /* user area microcode data buffer */
+EXPORT_SYMBOL_GPL(user_buffer);
+static unsigned int user_buffer_size; /* it's size */
+EXPORT_SYMBOL_GPL(user_buffer_size);

static int do_microcode_update (void)
{
@@ -129,8 +126,8 @@ static int do_microcode_update (void)

old = current->cpus_allowed;

- while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) {
- error = microcode_sanity_check(new_mc);
+ while ((cursor = microcode_ops->get_next_ucode(&new_mc, cursor)) > 0) {
+ error = microcode_ops->microcode_sanity_check(new_mc);
if (error)
goto out;
/*
@@ -143,11 +140,12 @@ static int do_microcode_update (void)
if (!uci->valid)
continue;
set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- error = get_matching_microcode(new_mc, cpu);
+ error = microcode_ops->get_matching_microcode(new_mc,
+ cpu);
if (error < 0)
goto out;
if (error == 1)
- apply_microcode(cpu);
+ microcode_ops->apply_microcode(cpu);
}
vfree(new_mc);
}
@@ -230,7 +228,8 @@ MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
#endif

/* fake device for request_firmware */
-struct platform_device *microcode_pdev;
+static struct platform_device *microcode_pdev;
+EXPORT_SYMBOL_GPL(microcode_pdev);

static void microcode_init_cpu(int cpu, int resume)
{
@@ -241,9 +240,9 @@ static void microcode_init_cpu(int cpu, int resume)

set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
mutex_lock(&microcode_mutex);
- collect_cpu_info(cpu);
+ microcode_ops->collect_cpu_info(cpu);
if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
- cpu_request_microcode(cpu);
+ microcode_ops->cpu_request_microcode(cpu);
mutex_unlock(&microcode_mutex);
set_cpus_allowed_ptr(current, &old);
}
@@ -268,7 +267,7 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)

mutex_lock(&microcode_mutex);
if (uci->valid)
- err = cpu_request_microcode(cpu);
+ err = microcode_ops->cpu_request_microcode(cpu);
mutex_unlock(&microcode_mutex);
put_online_cpus();
set_cpus_allowed_ptr(current, &old);
@@ -341,7 +340,7 @@ static int mc_sysdev_remove(struct sys_device *sys_dev)
return 0;

pr_debug("microcode: CPU%d removed\n", cpu);
- microcode_fini_cpu(cpu);
+ microcode_ops->microcode_fini_cpu(cpu);
sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
return 0;
}
@@ -354,7 +353,7 @@ static int mc_sysdev_resume(struct sys_device *dev)
return 0;
pr_debug("microcode: CPU%d resumed\n", cpu);
/* only CPU 0 will apply ucode here */
- apply_microcode(0);
+ microcode_ops->apply_microcode(0);
return 0;
}

@@ -374,7 +373,7 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
switch (action) {
case CPU_UP_CANCELED_FROZEN:
/* The CPU refused to come up during a system resume */
- microcode_fini_cpu(cpu);
+ microcode_ops->microcode_fini_cpu(cpu);
break;
case CPU_ONLINE:
case CPU_DOWN_FAILED:
@@ -382,9 +381,9 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
break;
case CPU_ONLINE_FROZEN:
/* System-wide resume is in progress, try to apply microcode */
- if (apply_microcode_check_cpu(cpu)) {
+ if (microcode_ops->apply_microcode_check_cpu(cpu)) {
/* The application of microcode failed */
- microcode_fini_cpu(cpu);
+ microcode_ops->microcode_fini_cpu(cpu);
__mc_sysdev_add(sys_dev, 1);
break;
}
@@ -408,12 +407,17 @@ static struct notifier_block __refdata mc_cpu_notifier = {
.notifier_call = mc_cpu_callback,
};

-static int __init microcode_init (void)
+static int microcode_init(void *opaque, struct module *module)
{
+ struct microcode_ops *ops = (struct microcode_ops *)opaque;
int error;

- printk(KERN_INFO
- "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@xxxxxxxxxxxxxxxxxxxx>\n");
+ if (microcode_ops) {
+ printk(KERN_ERR "microcode: already loaded the other module\n");
+ return -EEXIST;
+ }
+
+ microcode_ops = ops;

error = microcode_dev_init();
if (error)
@@ -435,8 +439,15 @@ static int __init microcode_init (void)
}

register_hotcpu_notifier(&mc_cpu_notifier);
+
+ printk(KERN_INFO
+ "Microcode Update Driver: v" MICROCODE_VERSION
+ " <tigran@xxxxxxxxxxxxxxxxxxxx>"
+ " <peter.oruba@xxxxxxx>\n");
+
return 0;
}
+EXPORT_SYMBOL_GPL(microcode_init);

static void __exit microcode_exit (void)
{
@@ -449,7 +460,10 @@ static void __exit microcode_exit (void)
put_online_cpus();

platform_device_unregister(microcode_pdev);
-}

-module_init(microcode_init)
-module_exit(microcode_exit)
+ microcode_ops = NULL;
+
+ printk(KERN_INFO
+ "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
+}
+EXPORT_SYMBOL_GPL(microcode_exit);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 4754137..dd2133b 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -119,6 +119,10 @@ MODULE_LICENSE("GPL");

#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)

+
+extern int microcode_init(void *opaque, struct module *module);
+extern void microcode_exit(void);
+
/* serialize access to the physical write to MSR 0x79 */
static DEFINE_SPINLOCK(microcode_update_lock);

@@ -127,7 +131,7 @@ extern struct mutex microcode_mutex;

extern struct ucode_cpu_info ucode_cpu_info[NR_CPUS];

-void collect_cpu_info(int cpu_num)
+static void collect_cpu_info(int cpu_num)
{
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
@@ -175,7 +179,7 @@ static inline int microcode_update_match(int cpu_num,
return 1;
}

-int microcode_sanity_check(void *mc)
+static int microcode_sanity_check(void *mc)
{
struct microcode_header_intel *mc_header = mc;
struct extended_sigtable *ext_header = NULL;
@@ -259,7 +263,7 @@ int microcode_sanity_check(void *mc)
* return 1 - found update
* return < 0 - error
*/
-int get_matching_microcode(void *mc, int cpu)
+static int get_matching_microcode(void *mc, int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
struct microcode_header_intel *mc_header = mc;
@@ -288,7 +292,8 @@ int get_matching_microcode(void *mc, int cpu)
return 0;
find:
pr_debug("microcode: CPU%d found a matching microcode update with"
- " version 0x%x (current=0x%x)\n", cpu, mc_header->rev, uci->rev);
+ " version 0x%x (current=0x%x)\n",
+ cpu, mc_header->rev, uci->rev);
new_mc = vmalloc(total_size);
if (!new_mc) {
printk(KERN_ERR "microcode: error! Can not allocate memory\n");
@@ -303,7 +308,7 @@ find:
return 1;
}

-void apply_microcode(int cpu)
+static void apply_microcode(int cpu)
{
unsigned long flags;
unsigned int val[2];
@@ -347,7 +352,7 @@ void apply_microcode(int cpu)
extern void __user *user_buffer; /* user area microcode data buffer */
extern unsigned int user_buffer_size; /* it's size */

-long get_next_ucode(void **mc, long offset)
+static long get_next_ucode(void **mc, long offset)
{
struct microcode_header_intel mc_header;
unsigned long total_size;
@@ -406,7 +411,7 @@ static long get_next_ucode_from_buffer(void **mc, const u8 *buf,
/* fake device for request_firmware */
extern struct platform_device *microcode_pdev;

-int cpu_request_microcode(int cpu)
+static int cpu_request_microcode(int cpu)
{
char name[30];
struct cpuinfo_x86 *c = &cpu_data(cpu);
@@ -455,7 +460,7 @@ int cpu_request_microcode(int cpu)
return error;
}

-int apply_microcode_check_cpu(int cpu)
+static int apply_microcode_check_cpu(int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
@@ -503,13 +508,42 @@ int apply_microcode_check_cpu(int cpu)
return err;
}

-void microcode_fini_cpu(int cpu)
+static void microcode_fini_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;

mutex_lock(&microcode_mutex);
uci->valid = 0;
- kfree(uci->mc.mc_intel);
+ vfree(uci->mc.mc_intel);
uci->mc.mc_intel = NULL;
mutex_unlock(&microcode_mutex);
}
+
+static struct microcode_ops microcode_intel_ops = {
+ .get_next_ucode = get_next_ucode,
+ .get_matching_microcode = get_matching_microcode,
+ .microcode_sanity_check = microcode_sanity_check,
+ .apply_microcode_check_cpu = apply_microcode_check_cpu,
+ .cpu_request_microcode = cpu_request_microcode,
+ .collect_cpu_info = collect_cpu_info,
+ .apply_microcode = apply_microcode,
+ .microcode_fini_cpu = microcode_fini_cpu,
+};
+
+static int __init microcode_intel_module_init(void)
+{
+ struct cpuinfo_x86 *c = &cpu_data(get_cpu());
+
+ if (c->x86_vendor == X86_VENDOR_INTEL)
+ return microcode_init(&microcode_intel_ops, THIS_MODULE);
+ else
+ return -ENODEV;
+}
+
+static void __exit microcode_intel_module_exit(void)
+{
+ microcode_exit();
+}
+
+module_init(microcode_intel_module_init)
+module_exit(microcode_intel_module_exit)
--
1.5.4.5




--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/