Re: [PATCH PROPOSAL] libata/pci: Move D3 hack handling from libatainto PCI

From: Greg KH
Date: Thu Jul 24 2008 - 13:10:42 EST


On Thu, Jul 24, 2008 at 05:18:38PM +0100, Alan Cox wrote:
> Libata has some hacks to deal with certain controllers going silly in D3
> state. The right way to handle this is to keep a PCI device flag for such
> devices. That can then be generalised for no ATA devices with power
> problems.
>
> Signed-off-by: Alan Cox <alan@xxxxxxxxxx>

No objection from me at all, but the current PCI maintainer might want
to also look at it :)

(added Jesse to the CC: with the full patch below.)

thanks,

greg k-h

>
> diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
> index fbe6057..c5f91e6 100644
> --- a/drivers/ata/pata_acpi.c
> +++ b/drivers/ata/pata_acpi.c
> @@ -259,12 +259,6 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
> .port_ops = &pacpi_ops,
> };
> const struct ata_port_info *ppi[] = { &info, NULL };
> - if (pdev->vendor == PCI_VENDOR_ID_ATI) {
> - int rc = pcim_enable_device(pdev);
> - if (rc < 0)
> - return rc;
> - pcim_pin_device(pdev);
> - }
> return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
> }
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index d00f0e0..1f70a9e 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -572,6 +572,10 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
> if (!ret)
> pci_update_current_state(dev);
> }
> + /* This device is quirked not to be put into D3, so
> + don't put it in D3 */
> + if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
> + return 0;
>
> error = pci_raw_set_power_state(dev, state);
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 12d4893..11cc96d 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -908,7 +908,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB
> /*
> * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
> */
> -static void __init quirk_ide_samemode(struct pci_dev *pdev)
> +static void __devinit quirk_ide_samemode(struct pci_dev *pdev)
> {
> u8 prog;
>
> @@ -923,6 +923,19 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev)
> }
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
>
> +/*
> + * Some ATA devices break if put into D3
> + */
> +
> +static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
> +{
> + /* Quirk the legacy ATA devices only. The AHCI ones are ok */
> + if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
> + pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
> +
> /* This was originally an Alpha specific thing, but it really fits here.
> * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
> */
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index a6a088e..02ebeb5 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -124,6 +124,8 @@ enum pci_dev_flags {
> * generation too.
> */
> PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
> + /* Device configuration is irrevocably lost if disabled into D3 */
> + PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
> };
>
> typedef unsigned short __bitwise pci_bus_flags_t;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/