Re: [RFC PATCH] x86:Use cpu_khz for loops_per_jiffy calculation

From: Alok Kataria
Date: Thu Jun 19 2008 - 21:22:46 EST


Hi Arjan,

I have modified the patch to use the pre-calculated value only for the
boot processor.

Please have a look.
Patch is on top of today's git.

--
On X86 platform we can use the value of tsc_khz computed during tsc calibration
to calculate the loops_per_jiffy value. Its very important to keep the error in
lpj values to minimum as any error in that may result in kernel panic in
check_timer.
In virtualization environment, On a highly overloaded host the guest delay
calibration may sometimes result in errors beyond the ~50% that timer_irq_works
can handle, resulting in the guest panicking.

Does some formating changes to lpj_setup code to now have a single printk to
print the bogomips value.

We do this only for the boot processor because the AP's can have different
base frequencies or the BIOS might boot a AP at a different frequency.

Signed-off-by: Alok N Kataria <akataria@xxxxxxxxxx>

Index: linux-2.6/arch/x86/kernel/time_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/time_64.c 2008-06-09 10:19:20.000000000 -0700
+++ linux-2.6/arch/x86/kernel/time_64.c 2008-06-19 17:22:53.000000000 -0700
@@ -123,6 +123,8 @@
(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
cpu_khz = calculate_cpu_khz();

+ lpj_tsc = ((unsigned long)tsc_khz * 1000)/HZ;
+
if (unsynchronized_tsc())
mark_tsc_unstable("TSCs unsynchronized");

Index: linux-2.6/include/linux/delay.h
===================================================================
--- linux-2.6.orig/include/linux/delay.h 2008-06-09 10:19:20.000000000 -0700
+++ linux-2.6/include/linux/delay.h 2008-06-19 17:22:28.000000000 -0700
@@ -41,6 +41,7 @@
#define ndelay(x) ndelay(x)
#endif

+extern unsigned long lpj_tsc;
void calibrate_delay(void);
void msleep(unsigned int msecs);
unsigned long msleep_interruptible(unsigned int msecs);
Index: linux-2.6/init/calibrate.c
===================================================================
--- linux-2.6.orig/init/calibrate.c 2008-06-09 10:19:20.000000000 -0700
+++ linux-2.6/init/calibrate.c 2008-06-19 18:21:12.000000000 -0700
@@ -8,7 +8,9 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/timex.h>
+#include <linux/smp.h>

+unsigned long lpj_tsc;
unsigned long preset_lpj;
static int __init lpj_setup(char *str)
{
@@ -108,6 +110,10 @@
* This is the number of bits of precision for the loops_per_jiffy. Each
* bit takes on average 1.5/HZ seconds. This (like the original) is a little
* better than 1%
+ * For the boot cpu we can skip the delay calibration and assign it a value
+ * calculated based on the tsc frequency.
+ * For the rest of the CPUs we cannot assume that the tsc frequency is same as
+ * the cpu frequency, hence do the calibration for those.
*/
#define LPS_PREC 8

@@ -118,16 +124,15 @@

if (preset_lpj) {
loops_per_jiffy = preset_lpj;
- printk("Calibrating delay loop (skipped)... "
- "%lu.%02lu BogoMIPS preset\n",
- loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100);
+ printk(KERN_DEBUG "Calibrating delay loop skipped, "
+ "using preset value.. ");
+ } else if ((smp_processor_id() == 0) && lpj_tsc) {
+ loops_per_jiffy = lpj_tsc;
+ printk(KERN_DEBUG "Calibrating delay loop skipped, "
+ "using value calculated from tsc.. ");
} else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) {
- printk("Calibrating delay using timer specific routine.. ");
- printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
- loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100,
- loops_per_jiffy);
+ printk(KERN_DEBUG "Calibrating delay using timer "
+ "specific routine.. ");
} else {
loops_per_jiffy = (1<<12);

@@ -161,12 +166,8 @@
if (jiffies != ticks) /* longer than 1 tick */
loops_per_jiffy &= ~loopbit;
}
-
- /* Round the value and print it */
- printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
- loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100,
- loops_per_jiffy);
}
-
+ printk(KERN_DEBUG "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+ loops_per_jiffy/(500000/HZ),
+ (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
}
Index: linux-2.6/arch/x86/kernel/tsc_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/tsc_32.c 2008-06-09 10:19:20.000000000 -0700
+++ linux-2.6/arch/x86/kernel/tsc_32.c 2008-06-19 17:23:42.000000000 -0700
@@ -401,6 +401,7 @@
void __init tsc_init(void)
{
int cpu;
+ u64 lpj;

if (!cpu_has_tsc || tsc_disabled) {
/* Disable the TSC in case of !cpu_has_tsc */
@@ -421,6 +422,10 @@
return;
}

+ lpj = ((u64)tsc_khz * 1000);
+ do_div(lpj, HZ);
+ lpj_tsc = lpj;
+
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/