[PATCH -mm] max7301: check spi_setup() return code, general cleanup

From: Guennadi Liakhovetski
Date: Thu Jun 12 2008 - 09:13:56 EST


Fix inaccuracies in comments, check spi_setup() return code, mask off high
byte in max7301_read(). Thanks to David Brownell for the review.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxxxxxxxxxx>

---

On Thu, 12 Jun 2008, David Brownell wrote:

> Some comments about one routine; presumably more to follow:

Hopefully all points addressed.

Thanks
Guennadi

diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index f35fac5..fc7cebc 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -71,7 +71,7 @@ struct max7301 {
*
* A write to the MAX7301 means one message with one transfer
*
- * Returns 0 if successfull or a negative value on error
+ * Returns 0 if successful or a negative value on error
*/
static int max7301_write(struct spi_device *spi, unsigned int reg, unsigned int val)
{
@@ -84,9 +84,9 @@ static int max7301_write(struct spi_device *spi, unsigned int reg, unsigned int
* @spi: The SPI device
* @reg: Register offset
*
- * A read from the MAX7301 means one message with two transfers
+ * A read from the MAX7301 means two messages with one transfer each
*
- * Returns positive 8 bit value from device if successfull or a
+ * Returns positive 8 bit value from device if successful or a
* negative value on error
*/
static int max7301_read(struct spi_device *spi, unsigned int reg)
@@ -99,12 +99,13 @@ static int max7301_read(struct spi_device *spi, unsigned int reg)
if (ret)
return ret;
/*
- * FIXME: This read should write 0x0000 (=NOOP at MAX7301 side)
+ * This relies on the fact, that a transfer with NULL tx_buf shifts out
+ * zero bytes (=NOOP for MAX7301)
*/
ret = spi_read(spi, (u8 *)&word, sizeof(word));
if (ret)
return ret;
- return word;
+ return word & 0xff;
}

static int max7301_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -224,7 +225,9 @@ static int __devinit max7301_probe(struct spi_device *spi)
*/
spi->bits_per_word = 16;

- spi->master->setup(spi);
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;

ts = kzalloc(sizeof(struct max7301), GFP_KERNEL);
if (!ts)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/