Re: [PATCH] DM9000: Restore MII physical polling timer.

From: Michael Abbott
Date: Fri May 02 2008 - 03:24:05 EST


On Mon, 28 Apr 2008, Ben Dooks wrote:
On Thu, Apr 24, 2008 at 10:12:59AM +0000, Michael Abbott wrote:
From: Michael Abbott <michael.abbott@xxxxxxxxxxxxx>

DM9000: Restore MII physical polling timer.

In commit fcfa81aa3e8d885356139122fcb281487b983468 the timer for polling the
MII physical layer was removed because of conflicts with newly added mutexes.
Unfortunately a side effect of this change is that the corresponding ethernet
layer is permanently reported as down: there is no other way to read the link
status.

This commit restores the timer, but uses the default work queue for polling.

I've already submitted a similar patch to netdev@xxxxxxxxxxxxxxx

I presume you mean the patch at
http://marc.info/?l=linux-netdev&m=120818415110509&w=2
?

If so, I think there's something not quite right with your timer cancellation -- as far as I can tell (the workqueue code seems to have been under quite a bit of flux, and the comments are sparse) we should be using cancel_delayed_work_sync() -- this appears to be the correct routine for cancelling a self retriggering workqueue timer.

If this change is made (and the corresponding simplifications made -- for example, it also appears to be defined that container_of can be used directly on the work_struct*, since delayed_work is defined to place the work_struct at the start -- then your patch becomes effectively identical to my patch below.



Signed-off-by: Michael Abbott <michael.abbott@xxxxxxxxxxxxx>
---
drivers/net/dm9000.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)

This patch is against 2.6.25, and has been tested with the Colibri PXA270
board (patch follows separately).

diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d63cc93..9ad9499 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -43,6 +43,7 @@
/* Board/System/Debug information/definition ---------------- */

#define DM9000_PHY 0x40 /* PHY address 0x01 */
+#define DM9000_TIMER_WUT (HZ*2) /* timer wakeup time : 2 second */

#define CARDNAME "dm9000"
#define PFX CARDNAME ": "
@@ -117,6 +118,8 @@ typedef struct board_info {

struct mutex addr_lock; /* phy and eeprom access lock */

+ struct delayed_work timer; /* Interface status timer. */
+
spinlock_t lock;

struct mii_if_info mii;
@@ -144,6 +147,7 @@ static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
static int dm9000_stop(struct net_device *);
static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd);

+static void dm9000_timer(struct work_struct * work);
static void dm9000_init_dm9000(struct net_device *);

static irqreturn_t dm9000_interrupt(int, void *);
@@ -762,6 +766,10 @@ dm9000_open(struct net_device *dev)
mii_check_media(&db->mii, netif_msg_link(db), 1);
netif_start_queue(dev);

+ /* Start the media status timer running. */
+ INIT_DELAYED_WORK(&db->timer, dm9000_timer);
+ schedule_delayed_work(&db->timer, DM9000_TIMER_WUT);
+
return 0;
}

@@ -876,6 +884,9 @@ dm9000_stop(struct net_device *ndev)
{
board_info_t *db = (board_info_t *) ndev->priv;

+ /* Delete the timer and make sure it's not running right now! */
+ cancel_delayed_work_sync(&db->timer);
+
if (netif_msg_ifdown(db))
dev_dbg(db->dev, "shutting down %s\n", ndev->name);

@@ -965,6 +976,16 @@ dm9000_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}

+
+/* Two second timer to poll the media status -- the DM9000 doesn't provide a
+ * status interrupt, so this has to be polled. */
+static void dm9000_timer(struct work_struct * work)
+{
+ board_info_t *db = container_of(work, board_info_t, timer);
+ mii_check_media(&db->mii, netif_msg_link(db), 0);
+ schedule_delayed_work(&db->timer, DM9000_TIMER_WUT);
+}
+
struct dm9000_rxhdr {
u8 RxPktReady;
u8 RxStatus;
--
1.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html