Re: dvd writing problem

From: Andrew Morton
Date: Fri May 02 2008 - 01:42:53 EST


On Thu, 1 May 2008 11:35:38 -0400 Gene Heskett <gene.heskett@xxxxxxxxx> wrote:

> Greetings all;
>
> I'm going to describe the problem, and let you tell me where to report it.

linux-ide

> System is Biostart MB, XP-2800 cpu, gig of ram.
>
> 1. burn dvd image using k3b, with write verify turned on.
>
> 2. when disk is ejected at end of a successful burn, then pulled back in, a
> read error is reported long before the drive has recognized the disk, the
> disk is ejected again and k3b bails out of the verify phase. This does not
> occur for a cd-r.
>
> 3. manually close drive with the disc still in the tray.
>
> 4. About 40 secs later, at about the time the drive would have accepted the
> disc as a valid disc, the system is frozen solidly, no drive leds on and the
> clock in the corner of the screen is stopped. I have let it sit that way for
> as long as 2 minutes before tapping the hardware reset button.
>
> 5. Eject the disc while its posting and reboot, to either 2.6.24.5 or 2.6.25,
> both do exactly the same actions.
>
> 6. Once system is up again, re-insert disc, wait for drive to accept it, then
> do a verify by hand, disc is good, it can be mounted and read just fine.
>
> 7. disc is a +RW disc, so it should be re-writable. Pick a different .iso and
> start k3b again using it. K3b goes through the motions, but 2 or 3 seconds
> after the real write starts with perhaps 30 megabytes *supposedly* written,
> k3b gets a write error and the burn bails out, ejecting the disc as it does.
>
> 8. insert disc and loop this sequence back to #3 above until tired of
> rebooting cuz the box is frozen. Once rebooted, and the disc inspected, it
> is obvious the second write never touched the disc as the first write is
> still there and passes the sh1sum or md5sum test correctly.
>
> Sebastian Truex and I have been discussing this for a while now, and I have
> even replaced the writer drive, a LITEON that I started with, with an HP,
> even faster drive, without changing a thing above. It is 100% repeatable.
>
> Where do I file the bug report? There are no interesting entries in the
> messages log, no oops, nothing.

It's unclear whether that drive is attached via stat, pata, ide, scsi or
whatever. The dmesg output would clear that up.

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/