Re: 2.6.24.3: regular sata drive resets - worrisome?

[Roger Heflin]

Tejun Heo wrote:
> > > I can offer to you rebuilding that md in a test environment, and 
> > > giving you access to it, if you're interested.
>
> Can you hook up those failed drives to a different controller?  Say, 
> ahci or ata_piix and put them under write load (ext3 w/ barrier=1 and 
> copying lots of files into it should work) and see whether the problem 
> reproduces?

I can move switch the disks to a sata_promise controller, I also have a sata_via 
controller but I cannot get those disks to work at all on it (it initially sees 
the disk, but does not finish init).

I don't on the machine that those disks are on have any other sata controllers.

> > Here are the errors I get, though look at it closer, I am don't appear 
> > to be getting the reset, just this error from time to time:
> >
> > sd 9:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
> > sd 9:0:0:0: [sde] Write Protect is off
> > sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
> > sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't 
> > support DPO or FUA
> > ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
> > ata8.00: BMDMA2 stat 0x687d8009
> > ata8.00: cmd 25/00:80:a7:00:1d/00:01:1d:00:00/e0 tag 0 cdb 0x0 data 
> > 196608 in
> >          res 51/04:8f:98:01:1d/00:00:1d:00:00/f0 Emask 0x1 (device error)
> > ata8.00: configured for UDMA/100
>
> That's device abort error on read.  The drive just can't read sector one 
> of the requested sectors and it's not sata_sil24.  It's a bmdma one.
>
> > I have 4 identical disks, with all 4 connected to the SIL controller 
> > all give some errors, moving 2 of the disks to a promise controller 
> > makes the errors go away on the 2 connected to the promise 
> > controller.   All drives are part of a software raid5 array.
>
> Ah.. okay, sata_sil.  Roger, the moving and errors are not very likely 
> to have anything to do with each other.  The only possibility is 
> transmission problems but the drive didn't report transport error (ICRC) 
> and it's more likely that the drive was experiencing temporary failures. 
>  It's also possible that the drive set ABRT although there was some 
> problem with the transport tho.
>
> If you move the drive back to the sata_sil, do those problems appear 
> again?  Anyways, this doesn't really have anything to do with what Hans 
> is seeing.

I can swap the disk around next time I reboot the machine, the 2 on the promise 
will go to the sil and the 2 on the sil will go to the promise, from past 
testing I expect the disk on the sil to have the errors and the ones on the 
promise to not have errors.

After I looked at the error more carefully and I though that too, I had 
originally thought I was getting resets also but I was wrong on that.

                      Roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/