[PATCH 4/7] lxfb: rearrange/rename MSR bitfields
From: Andres Salomon
Date: Thu Mar 27 2008 - 20:09:19 EST
Finally, move the MSR bitfields around in lxfb.h, and rename them.
Alas, most of that crap appears to be undocumented.
Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxx>
---
drivers/video/geode/lxfb.h | 52 ++++++++++++++++++++-------------------
drivers/video/geode/lxfb_ops.c | 37 ++++++++++++++--------------
2 files changed, 46 insertions(+), 43 deletions(-)
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index 0e3cb91..b3fbc56 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -27,31 +27,6 @@ int lx_blank_display(struct fb_info *, int);
void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
unsigned int, unsigned int);
-/* MSRS */
-
-#define GLCP_DOTPLL_RESET (1 << 0)
-#define GLCP_DOTPLL_BYPASS (1 << 15)
-#define GLCP_DOTPLL_HALFPIX (1 << 24)
-#define GLCP_DOTPLL_LOCK (1 << 25)
-
-#define DF_CONFIG_OUTPUT_MASK 0x38
-#define DF_OUTPUT_PANEL 0x08
-#define DF_OUTPUT_CRT 0x00
-#define DF_SIMULTANEOUS_CRT_AND_FP (1 << 15)
-
-#define DF_DEFAULT_TFT_PAD_SEL_LOW 0xDFFFFFFF
-#define DF_DEFAULT_TFT_PAD_SEL_HIGH 0x0000003F
-
-#define DC_SPARE_DISABLE_CFIFO_HGO 0x00000800
-#define DC_SPARE_VFIFO_ARB_SELECT 0x00000400
-#define DC_SPARE_WM_LPEN_OVRD 0x00000200
-#define DC_SPARE_LOAD_WM_LPEN_MASK 0x00000100
-#define DC_SPARE_DISABLE_INIT_VID_PRI 0x00000080
-#define DC_SPARE_DISABLE_VFIFO_WM 0x00000040
-#define DC_SPARE_DISABLE_CWD_CHECK 0x00000020
-#define DC_SPARE_PIX8_PAN_FIX 0x00000010
-#define DC_SPARE_FIRST_REQ_MASK 0x00000002
-
/* Graphics Processor registers (table 6-29 from the data book) */
enum gp_registers {
@@ -390,4 +365,31 @@ static inline void write_fp(struct lxfb_par *par, int reg, uint32_t val)
writel(val, par->vp_regs + 8*reg + VP_FP_START);
}
+
+/* MSRs are defined in asm/geode.h; their bitfields are here */
+
+#define MSR_GLCP_DOTPLL_LOCK (1 << 25) /* r/o */
+#define MSR_GLCP_DOTPLL_HALFPIX (1 << 24)
+#define MSR_GLCP_DOTPLL_BYPASS (1 << 15)
+#define MSR_GLCP_DOTPLL_DOTRESET (1 << 0)
+
+/* note: this is actually the VP's GLD_MSR_CONFIG */
+#define MSR_LX_GLD_MSR_CONFIG_FMT ((1 << 3) | (1 << 4) | (1 << 5))
+#define MSR_LX_GLD_MSR_CONFIG_FMT_FP (1 << 3)
+#define MSR_LX_GLD_MSR_CONFIG_FMT_CRT (0)
+#define MSR_LX_GLD_MSR_CONFIG_FPC (1 << 15) /* FP *and* CRT */
+
+#define MSR_LX_MSR_PADSEL_TFT_SEL_LOW 0xDFFFFFFF /* ??? */
+#define MSR_LX_MSR_PADSEL_TFT_SEL_HIGH 0x0000003F /* ??? */
+
+#define MSR_LX_SPARE_MSR_DIS_CFIFO_HGO (1 << 11) /* undocumented */
+#define MSR_LX_SPARE_MSR_VFIFO_ARB_SEL (1 << 10) /* undocumented */
+#define MSR_LX_SPARE_MSR_WM_LPEN_OVRD (1 << 9) /* undocumented */
+#define MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M (1 << 8) /* undocumented */
+#define MSR_LX_SPARE_MSR_DIS_INIT_V_PRI (1 << 7) /* undocumented */
+#define MSR_LX_SPARE_MSR_DIS_VIFO_WM (1 << 6)
+#define MSR_LX_SPARE_MSR_DIS_CWD_CHECK (1 << 5) /* undocumented */
+#define MSR_LX_SPARE_MSR_PIX8_PAN_FIX (1 << 4) /* undocumented */
+#define MSR_LX_SPARE_MSR_FIRST_REQ_MASK (1 << 1) /* undocumented */
+
#endif
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 6659df7..e042ae7 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -104,12 +104,12 @@ static void lx_set_dotpll(u32 pllval)
rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
- if ((dotpll_lo & GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
+ if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
return;
dotpll_hi = pllval;
- dotpll_lo &= ~(GLCP_DOTPLL_BYPASS | GLCP_DOTPLL_HALFPIX);
- dotpll_lo |= GLCP_DOTPLL_RESET;
+ dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX);
+ dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET;
wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
@@ -121,13 +121,13 @@ static void lx_set_dotpll(u32 pllval)
for (i = 0; i < 1000; i++) {
rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
- if (dotpll_lo & GLCP_DOTPLL_LOCK)
+ if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK)
break;
}
/* Clear the reset bit */
- dotpll_lo &= ~GLCP_DOTPLL_RESET;
+ dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET;
wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
}
@@ -249,8 +249,8 @@ static void lx_graphics_enable(struct fb_info *info)
write_fp(par, FP_PT2, FP_PT2_SCRC);
write_fp(par, FP_DFC, FP_DFC_BC);
- msrlo = DF_DEFAULT_TFT_PAD_SEL_LOW;
- msrhi = DF_DEFAULT_TFT_PAD_SEL_HIGH;
+ msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW;
+ msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH;
wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
}
@@ -316,18 +316,17 @@ void lx_set_mode(struct fb_info *info)
/* Set output mode */
rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
- msrval &= ~DF_CONFIG_OUTPUT_MASK;
+ msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT;
if (par->output & OUTPUT_PANEL) {
- msrval |= DF_OUTPUT_PANEL;
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP;
if (par->output & OUTPUT_CRT)
- msrval |= DF_SIMULTANEOUS_CRT_AND_FP;
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FPC;
else
- msrval &= ~DF_SIMULTANEOUS_CRT_AND_FP;
- } else {
- msrval |= DF_OUTPUT_CRT;
- }
+ msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC;
+ } else
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT;
wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
@@ -379,10 +378,12 @@ void lx_set_mode(struct fb_info *info)
rdmsrl(MSR_LX_SPARE_MSR, msrval);
- msrval &= ~(DC_SPARE_DISABLE_CFIFO_HGO | DC_SPARE_VFIFO_ARB_SELECT |
- DC_SPARE_LOAD_WM_LPEN_MASK | DC_SPARE_WM_LPEN_OVRD |
- DC_SPARE_DISABLE_INIT_VID_PRI | DC_SPARE_DISABLE_VFIFO_WM);
- msrval |= DC_SPARE_DISABLE_VFIFO_WM | DC_SPARE_DISABLE_INIT_VID_PRI;
+ msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO
+ | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL
+ | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M
+ | MSR_LX_SPARE_MSR_WM_LPEN_OVRD);
+ msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM |
+ MSR_LX_SPARE_MSR_DIS_INIT_V_PRI;
wrmsrl(MSR_LX_SPARE_MSR, msrval);
gcfg = DC_GENERAL_CFG_DFLE; /* Display fifo enable */
--
1.5.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/