Re: v4l oops in 2.6.25-rc7

[Dave Jones]

On Thu, Mar 27, 2008 at 07:04:30PM -0400, Dave Jones wrote:
 > Booted up with an ancient bt848 card present and got this..

actually that card was slightly newer than I thought, it's an 878.
>From earlier in the boot process..

bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
bttv0: Bt878 (rev 17) at 0000:02:0b.0, irq: 23, latency: 32, mmio: 0xf47fe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom 0-0050: Hauppauge model 44354, rev B121, serial# 2106674
tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 0-0050: audio processor is MSP3415 (idx 6)
tveeprom 0-0050: has radio
bttv0: Hauppauge eeprom indicates model#44354
bttv0: tuner type=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21

	Dave

-- 
http://www.codemonkey.org.uk
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/