Re: broken access to a USB HID device after suspend

[Tino Keitel]

On Fri, Mar 14, 2008 at 08:13:36 +0100, Tino Keitel wrote:
> On Thu, Mar 13, 2008 at 14:59:48 -0400, Alan Stern wrote:
> 
> [...]
> 
> > > Well, it seems to be "fixed" by a suspend/resume cycle. Do you have
> > > a
> > > hint how I could try to fix it without suspend/resume, to test if
> > > it is
> > > really the LCD's fault?
> >
> > Testing has to come before fixing -- you can't fix the problem if you
> > don't know which component is at fault.  For all we know, the
> > hardware
> > could be fine and the problem could lie in your application.
> 
> I meant a method other than suspend/resume to fix the broken behaviour,
> so that we get an indication where the problem exactly is.
> 
> >
> > All I can think of for testing is to use usbmon to record the data
> > transfers when those -110 errors come up.
> 
> Well, I still don't have USB_DEBUG or usbmon enabled, but I just got
> that error again. I pulled the power plug from the LCD and replugged
> it, without success. Then I did a suspend/resume cycle, and it worked.

Hi again,

I now have CONFIG_USB_DEBUG enabled, and the bug occurred again. Here
is the kernel log:

2008-03-18_19:08:50.59598 kern.debug: usb usb3: usb auto-resume
2008-03-18_19:08:50.59606 kern.debug: usb usb3: wakeup_rh
2008-03-18_19:08:50.62971 kern.debug: hub 3-0:1.0: hub_resume
2008-03-18_19:08:50.62977 kern.debug: hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
2008-03-18_19:08:50.62994 kern.debug: usb usb4: usb auto-resume
2008-03-18_19:08:50.62998 kern.debug: usb usb4: wakeup_rh
2008-03-18_19:08:50.66637 kern.debug: hub 4-0:1.0: hub_resume
2008-03-18_19:08:50.66644 kern.debug: hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
2008-03-18_19:08:50.66662 kern.debug: usb usb2: usb auto-resume
2008-03-18_19:08:50.66666 kern.debug: usb usb2: wakeup_rh
2008-03-18_19:08:50.70342 kern.debug: hub 2-0:1.0: hub_resume
2008-03-18_19:08:50.70348 kern.debug: hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
2008-03-18_19:08:51.84851 kern.debug: usb usb3: suspend_rh (auto-stop)
2008-03-18_19:08:51.84858 kern.debug: usb usb4: suspend_rh (auto-stop)
2008-03-18_19:08:51.84862 kern.debug: usb usb2: suspend_rh (auto-stop)
2008-03-18_19:08:53.34640 kern.debug: hub 3-0:1.0: hub_suspend
2008-03-18_19:08:53.34646 kern.debug: usb usb3: bus auto-suspend
2008-03-18_19:08:53.34650 kern.debug: usb usb3: suspend_rh
2008-03-18_19:08:53.34654 kern.debug: hub 4-0:1.0: hub_suspend
2008-03-18_19:08:53.34658 kern.debug: usb usb4: bus auto-suspend
2008-03-18_19:08:53.34662 kern.debug: usb usb4: suspend_rh
2008-03-18_19:08:53.34666 kern.debug: hub 2-0:1.0: hub_suspend
2008-03-18_19:08:53.34670 kern.debug: usb usb2: bus auto-suspend
2008-03-18_19:08:53.34674 kern.debug: usb usb2: suspend_rh
2008-03-18_19:09:00.70316 kern.debug: usb 1-1.3: hidmon timed out on ep0in len=0/9
2008-03-18_19:09:00.70322 kern.debug: usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd hidmon rqt 129 rq 6 len 9 ret -110
2008-03-18_19:09:00.70339 kern.debug: usb 1-1.3: manual set_interface for iface 0, alt 0

Regards,
Tino
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/