Re: [BUG][RFC][GENERIC IRQ] linux-2.6.24 (delayed) disable IRQfeature not functional for handle_simple_irq

From: Thomas Gleixner
Date: Tue Feb 19 2008 - 05:49:34 EST


On Tue, 19 Feb 2008, Hennerich, Michael wrote:
> Thomas,
>
> I have reasonable doubt that the delayed disable feature on
> linux-2.6.24 for handle_simple_irq is broken.
>
> In 2.6.22 there was something like this:
>
> if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
> if (desc->chip->mask)
> desc->chip->mask(irq);
> ...
>
> However in 2.6.24 the "DISABLED" IRQ in case it happens is never going to be masked.
>
> if (unlikely(!action || (desc->status & IRQ_DISABLED)))
> goto out_unlock;
>
>
> I see a disabled IRQ being invoked in an endless loop.

Simple irq's are special, see the comment above handle_simple_irq:

Simple interrupts are either sent from a demultiplexing interrupt
handler or come from hardware, where no interrupt hardware control
is necessary.

Note: The caller is expected to handle the ack, clear, mask and
unmask issues if necessary.

Simple irqs are used for low level demultiplex handlers, where the full
control of the irqchip is in the low level handler.

See also the commit log of 971e5b35fb02c5088d49e6c024aab73582a35b71

In commit 76d2160147f43f982dfe881404cfde9fd0a9da21 lazy irq disabling
was implemented, and the simple irq handler had a masking set to it.

Remy Bohmer discovered that some devices in the ARM architecture
would trigger the mask, but never unmask it. His patch to do the
unmasking was questioned by Russell King about masking simple irqs
to begin with. Looking further, it was discovered that the problems
Remy was seeing was due to improper use of the simple handler by
devices, and he later submitted patches to fix those. But the issue
that was uncovered was that the simple handler should never mask.

This patch reverts the masking in the simple handler.

Thanks,

tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/