[M68KNOMMU]: platform setup for 523x ColdFire parts

From: Greg Ungerer
Date: Fri Feb 01 2008 - 02:36:07 EST


Switch to platform style configuration for 523x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@xxxxxxxxxxx>
---


diff -Naurp linux-2.6.24/arch/m68knommu/platform/523x/config.c linux-2.6.24-uc0/arch/m68knommu/platform/523x/config.c
--- linux-2.6.24/arch/m68knommu/platform/523x/config.c 2008-01-25 08:58:37.000000000 +1000
+++ linux-2.6.24-uc0/arch/m68knommu/platform/523x/config.c 2007-11-30 11:03:11.000000000 +1000
@@ -16,11 +16,11 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <asm/dma.h>
+#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>

/***************************************************************************/

@@ -28,14 +28,58 @@ void coldfire_reset(void);

/***************************************************************************/

-/*
- * DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
- MCF_MBAR + MCFDMA_BASE0,
+static struct mcf_platform_uart m523x_uart_platform[] = {
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .irq = MCFINT_VECBASE + MCFINT_UART0,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE3,
+ .irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
+ },
+ { },
};

-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+static struct platform_device m523x_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = m523x_uart_platform,
+};
+
+static struct platform_device *m523x_devices[] __initdata = {
+ &m523x_uart,
+};
+
+/***************************************************************************/
+
+#define INTC0 (MCF_MBAR + MCFICM_INTC0)
+
+static void __init m523x_uart_init_line(int line, int irq)
+{
+ u32 imr;
+
+ if ((line < 0) || (line > 2))
+ return;
+
+ writeb(0x30+line, (INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line));
+
+ imr = readl(INTC0 + MCFINTC_IMRL);
+ imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
+ writel(imr, INTC0 + MCFINTC_IMRL);
+}
+
+static void __init m523x_uarts_init(void)
+{
+ const int nrlines = ARRAY_SIZE(m523x_uart_platform);
+ int line;
+
+ for (line = 0; (line < nrlines); line++)
+ m523x_uart_init_line(line, m523x_uart_platform[line].irq);
+}

/***************************************************************************/

@@ -49,15 +93,26 @@ void mcf_disableall(void)

void mcf_autovector(unsigned int vec)
{
- /* Everything is auto-vectored on the 5272 */
+ /* Everything is auto-vectored on the 523x */
}

/***************************************************************************/

-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
{
mcf_disableall();
mach_reset = coldfire_reset;
+ m523x_uarts_init();
}

/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/