Re: JMicron PATA 2.6.24-rc7 can't find drives

[Marcin Gil]

Lennart Sorensen wrote:
> On Thu, Jan 24, 2008 at 03:48:23PM +0100, Marcin Gil wrote:
> > Yes, this is 80-wire cable; both are connected on the same cable. HDD is 
> > master and DVD is slave. I'll later try disconnecting DVD and see what 
> > happens. I didn't set cable-select due to how these drives are connected
> >
> > +-----+-----+
> > mobo  hdd   dvd
> >
> > I think that cable select would take dvd as master and hdd as slave.
> > This was not preferable when hdd was my primary drive. I can try 
> > cable-select now since I boot off new SATA drive.
>
> Does the BIOS see the HD on the jmicron when doing disk detection?
>
> I remember once forgetting to connect power to a driver and spending a
> while wondering why the drive wasn't showing up anywhere.
Yes, both drives are detected by BIOS. Everything is working fine with 
"old" ATA drivers (ide_disk/ide_cd).

IDE HDD Maxtor was my primary disk but I've recently bought new SATA 
disk and was trying to get rid of ATA.

Thank you,
-Marcin Gil

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/