[PATCH 20/26] atl1: update change mtu

[jacliburn]

From: Jay Cliburn <jacliburn@xxxxxxxxxxxxx>

Update atl1_change_mtu() to conform with the current vendor driver version
1.2.40.2.

Signed-off-by: Jay Cliburn <jacliburn@xxxxxxxxxxxxx>
---
 drivers/net/atlx/atl1.c |   39 ++++++++++++++++++++++-----------------
 1 files changed, 22 insertions(+), 17 deletions(-)

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 972de34..7d84a51 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2438,32 +2438,37 @@ static void atl1_reset_task(struct work_struct *work)
  * atl1_change_mtu - Change the Maximum Transfer Unit
  * @netdev: network interface device structure
  * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
  */
 static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct atl1_adapter *adapter = netdev_priv(netdev);
-	int old_mtu = netdev->mtu;
-	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+	struct atl1_hw *hw = &adapter->hw;
 
-	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
-	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
+	if ((new_mtu < 40) || (new_mtu > (ETH_DATA_LEN + VLAN_HLEN)))
 		return -EINVAL;
-	}
 
-	adapter->hw.max_frame_size = max_frame;
-	adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
-	adapter->rx_buffer_len = (max_frame + 7) & ~7;
-	adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;
+	if (hw->max_frame_size != new_mtu) {
+		while (test_and_set_bit(__ATL1_RESETTING, &adapter->flags))
+			msleep(1);
 
-	netdev->mtu = new_mtu;
-	if ((old_mtu != new_mtu) && netif_running(netdev)) {
-		atl1_down(adapter);
-		atl1_up(adapter);
-	}
+		if (netif_running(netdev))
+			atl1_down(adapter);
+
+		netdev->mtu = new_mtu;
+		adapter->hw.max_frame_size = new_mtu;
+		adapter->hw.tx_jumbo_task_th = (new_mtu + ETH_HLEN +
+			ETH_FCS_LEN + VLAN_HLEN + 7) >> 3;
+		adapter->rx_buffer_len = (new_mtu + ETH_HLEN +
+			ETH_FCS_LEN + VLAN_HLEN + 7) & ~7;
+		adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;
 
+		if (netif_running(netdev))
+			atl1_up(adapter);
+		else
+			atl1_reset(adapter);
+
+		clear_bit(__ATL1_RESETTING, &adapter->flags);
+	}
 	return 0;
 }
 
-- 
1.5.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/