Re: ATA bus error with external hd on esata

From: Jean-Louis Dupond
Date: Mon Dec 17 2007 - 12:27:57 EST


Greg Freemyer schreef:
On Dec 17, 2007 5:53 AM, Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote:
On Sat, 15 Dec 2007 21:10:47 +0100 Zsolt Barat <zsolt@xxxxxxxxxxxxxxxx> wrote:

Zsolt Barat schrieb:
hi list,
Let's cc the IDE development list.

i just bought a "MyBook" called external HD with a fixed enclosure, from
WD. Connected to the SATA port i constantly get "ATA bus error" messages
in the kernel log. Is this a known issue?


As an FYI: I've had a lot of problems with the big prepackaged drives
in the last 6 months even from Windows, so I would not be too quick to
blame Linux.

ie.
I bought several 500GB / 1000GB Buffalo Drives last month with plans
to use them from Windows via USB.

I attempted to do a lot of heavy file copying to/from them. I was
getting a bunch of "Delayed Write Failures",

I finally gave up.

The 500GB drives had a single hard drive internally, so I opened the
case, removed the drive and connected them via standalone external
carriers I had around. In that mode the drives worked fine (from
Windows). I've used both standalone eSata external carriers and
standalone USB external carriers with these same physical drives with
no issues.

My conclusion is that the electronics in the prepackaged external
units is just not up to the job if your doing heavy i/o.

Greg
Could u check the temps of the disk ? I had that error in windows also with to hot disks ! If temp is >50°C I would start to worry :)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/