Re: sata NCQ blacklist entry
From: Andrew Morton
Date: Fri Nov 23 2007 - 02:21:48 EST
On Tue, 13 Nov 2007 21:55:15 +0100 Jan-Simon M__ller <dl9pf@xxxxxx> wrote:
> Hi!
You removed from cc the guys who are most likely to fix this. Please always
do reply-to-all.
> Just using kernel 2.6.24-rc2 (325d22df7b19e0116aff3391d3a03f73d0634ded).
>
> When booting the system hangs, using the emergency-sync a couple of times gets
> the system to go on at some point.
> Its always around starting X/Firewall (can't actually say whats done in this
> moment).
>
> Looking at dmesg i found this (NCQ disabled ...)
>
> dmesg output
>
> ata1.00: exception Emask 0x2 SAct 0x4 SErr 0x0 action 0x2 frozen
> ata1.00: spurious completions during NCQ issue=0x0 SAct=0x4
> FIS=004040a1:00000002
> ata1.00: cmd 61/08:10:bc:b2:5d/00:00:08:00:00/40 tag 2 cdb 0x0 data 4096 out
> res 40/00:14:bc:b2:5d/00:00:08:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/133
> ata1: EH complete
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> ata1.00: NCQ disabled due to excessive errors
> ata1.00: exception Emask 0x2 SAct 0xfffd3 SErr 0x0 action 0x2 frozen
> ata1.00: spurious completions during NCQ issue=0x0 SAct=0xfffd3
> FIS=004040a1:00000020
> ata1.00: cmd 60/10:00:14:05:69/00:00:06:00:00/40 tag 0 cdb 0x0 data 8192 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:08:cc:dd:12/00:00:04:00:00/40 tag 1 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/18:20:84:54:a3/00:00:05:00:00/40 tag 4 cdb 0x0 data 12288 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:30:bc:b1:07/00:00:06:00:00/40 tag 6 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:38:dc:b1:07/00:00:06:00:00/40 tag 7 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/10:40:3c:b2:07/00:00:06:00:00/40 tag 8 cdb 0x0 data 8192 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:48:2c:cf:07/00:00:06:00:00/40 tag 9 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:50:3c:cf:07/00:00:06:00:00/40 tag 10 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:58:64:b4:12/00:00:04:00:00/40 tag 11 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/28:60:6c:b4:12/00:00:04:00:00/40 tag 12 cdb 0x0 data 20480 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/f8:68:7c:e1:07/00:00:06:00:00/40 tag 13 cdb 0x0 data 126976 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:70:a4:04:69/00:00:06:00:00/40 tag 14 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/18:78:b4:04:69/00:00:06:00:00/40 tag 15 cdb 0x0 data 12288 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:80:a4:5c:6a/00:00:06:00:00/40 tag 16 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/20:88:2c:05:69/00:00:06:00:00/40 tag 17 cdb 0x0 data 16384 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/30:90:54:05:69/00:00:06:00:00/40 tag 18 cdb 0x0 data 24576 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1.00: cmd 60/08:98:94:05:69/00:00:06:00:00/40 tag 19 cdb 0x0 data 4096 in
> res 40/00:04:14:05:69/00:00:06:00:00/40 Emask 0x2 (HSM violation)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/133
> ata1: EH complete
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
>
>
>
> hdparm -i /dev/sda
>
> /dev/sda:
>
> Model=WDC WD2500BEVS-22UST0 , FwRev=01.01A01, SerialNo=
> WD-WXE807E07297
> Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
> BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
>
> * signifies the current active mode
>
So is this problem (which in another email you attributed to smartd) also
present in 2.6.23?
And is is still present in 2.6.24-rc3?
Thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/