Re: 2.6.24-rc2 libertas_sdio fails to initialize Marvell SD8686

[Pierre Ossman]

On Thu, 15 Nov 2007 16:06:23 -0500
Bill Gribble <grib@xxxxxxxxxxxxxxx> wrote:

> 
> This block gets repeated about 200 times: 
> 
> Nov 15 11:52:31 pequin kernel: sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00000001
> Nov 15 11:52:31 pequin kernel: mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000
> Nov 15 11:52:31 pequin kernel: mmc0: starting CMD52 arg 10002000 flags 00000195
> 
> Then:
> 
> Nov 15 11:52:32 pequin kernel: sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00000001
> Nov 15 11:52:32 pequin kernel: mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000
> Nov 15 11:52:32 pequin kernel: mmc0: starting CMD52 arg 80022201 flags 00000195
> Nov 15 11:52:32 pequin kernel: sdhci [sdhci_irq()]: *** sdhci:slot0 got interrupt: 0x00000001
> Nov 15 11:52:32 pequin kernel: mmc0: req done (CMD52): 0: 00001001 00000000 00000000 00000000
> Nov 15 11:52:32 pequin kernel: libertas: failed to load helper firmware
> 
> Does that make any sense?  
> 

Odd. I'd guess it is waiting for the firmware to boot, bu you should be getting the debug string "waiting for helper to boot..." in that case.

Have you tried with the firmware that's supposed to be used with this board?

Rgds
-- 
     -- Pierre Ossman

  Linux kernel, MMC maintainer        http://www.kernel.org
  PulseAudio, core developer          http://pulseaudio.org
  rdesktop, core developer          http://www.rdesktop.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/