[PATCH 14/11] cxgb3 - CQ context operations time out too soon.

From: Divy Le Ray
Date: Thu Aug 23 2007 - 02:38:45 EST


From: Divy Le Ray <divy@xxxxxxxxxxx>

Currently, the driver only tries up to 5 times (5us) to get the results
of a CQ context operation. Testing has shown the chip can take as much
as 50us to return the response on SG_CONTEXT_CMD operations. So we up
the retry count to 100 to cover high loads.

Signed-off-by: Divy Le Ray <divy@xxxxxxxxxxx>
---

drivers/net/cxgb3/t3_hw.c | 19 +++++++++++--------
1 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 9358959..8f6efdb 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1867,6 +1867,8 @@ void t3_port_intr_clear(struct adapter *adapter, int idx)
phy->ops->intr_clear(phy);
}

+#define SG_CONTEXT_CMD_ATTEMPTS 100
+
/**
* t3_sge_write_context - write an SGE context
* @adapter: the adapter
@@ -1886,7 +1888,7 @@ static int t3_sge_write_context(struct adapter *adapter, unsigned int id,
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
- 0, 5, 1);
+ 0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}

/**
@@ -2072,7 +2074,7 @@ int t3_sge_enable_ecntxt(struct adapter *adapter, unsigned int id, int enable)
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(1) | F_EGRESS | V_CONTEXT(id));
return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
- 0, 5, 1);
+ 0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}

/**
@@ -2096,7 +2098,7 @@ int t3_sge_disable_fl(struct adapter *adapter, unsigned int id)
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(1) | F_FREELIST | V_CONTEXT(id));
return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
- 0, 5, 1);
+ 0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}

/**
@@ -2120,7 +2122,7 @@ int t3_sge_disable_rspcntxt(struct adapter *adapter, unsigned int id)
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(1) | F_RESPONSEQ | V_CONTEXT(id));
return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
- 0, 5, 1);
+ 0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}

/**
@@ -2144,7 +2146,7 @@ int t3_sge_disable_cqcntxt(struct adapter *adapter, unsigned int id)
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(1) | F_CQ | V_CONTEXT(id));
return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
- 0, 5, 1);
+ 0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}

/**
@@ -2169,7 +2171,7 @@ int t3_sge_cqcntxt_op(struct adapter *adapter, unsigned int id, unsigned int op,
t3_write_reg(adapter, A_SG_CONTEXT_CMD, V_CONTEXT_CMD_OPCODE(op) |
V_CONTEXT(id) | F_CQ);
if (t3_wait_op_done_val(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
- 0, 5, 1, &val))
+ 0, SG_CONTEXT_CMD_ATTEMPTS, 1, &val))
return -EIO;

if (op >= 2 && op < 7) {
@@ -2179,7 +2181,8 @@ int t3_sge_cqcntxt_op(struct adapter *adapter, unsigned int id, unsigned int op,
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(0) | F_CQ | V_CONTEXT(id));
if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD,
- F_CONTEXT_CMD_BUSY, 0, 5, 1))
+ F_CONTEXT_CMD_BUSY, 0,
+ SG_CONTEXT_CMD_ATTEMPTS, 1))
return -EIO;
return G_CQ_INDEX(t3_read_reg(adapter, A_SG_CONTEXT_DATA0));
}
@@ -2205,7 +2208,7 @@ static int t3_sge_read_context(unsigned int type, struct adapter *adapter,
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(0) | type | V_CONTEXT(id));
if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, 0,
- 5, 1))
+ SG_CONTEXT_CMD_ATTEMPTS, 1))
return -EIO;
data[0] = t3_read_reg(adapter, A_SG_CONTEXT_DATA0);
data[1] = t3_read_reg(adapter, A_SG_CONTEXT_DATA1);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/