Re: high system cpu load during intense disk i/o
From: RafaÅ Bilski
Date: Mon Aug 06 2007 - 12:14:51 EST
Hello and thanks for your reply.
Hello again,
The cron job that is running every 10 min on my system is mpop (a
fetchmail-like program) and another running every 5 min is mrtg. Both
normally finish within 1-2 seconds.
The fact that these simple cron jobs don't finish ever is certainly because of
the high system CPU load. If you see the two_discs_bad.txt which I attached
on my original message, you'll see that *vmlinux*, and specifically the
*scheduler*, take up most time.
And the fact that this happens only when running two i/o processes but when
running only one everything is absolutely snappy (not at all slow, see
one_disc.txt), makes me sure that this is a kernel bug. I'd be happy to help
but I need some guidance to pinpoint the problem.
In Your oprofile output I find "acpi_pm_read" particulary interesting. Unlike
other VIA chipsets, which I know, Your doesn't use VLink to connect northbridge
to southbridge. Instead PCI bus connects these two. As You probably know
maximal PCI throughtput is 133MiB/s. In theory. In practice probably less.
ACPI registers are located on southbridge. This probably means that processor
needs access to PCI bus in order to read ACPI timer register.
Now some math. 20GiB disk probably can send data at 20MiB/s rate. 200GiB
disk probably about 40MiB/s. So 20+2*40=100MiB/s. I think that this could
explain why simple inl() call takes so much time and why Your system isn't
very responsive.
Thanks,
Dimitris
Let me know if You find my theory amazing or amusing.
RafaÅ
----------------------------------------------------------------------
Kobiety klamia o wiele skuteczniej niz mezczyzni.
Sprawdz, jak sie na nich poznac
http://link.interia.pl/f1b16
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/