suspend-to-disk using a SAS drive

From: Nevine AbouGhazaleh
Date: Sun Aug 05 2007 - 22:18:27 EST


I am trying to suspend-to-disk using the Suspend2 modules. I am using an SSD drive connected through a SAS bus interface. The SSD acts as a boot disk.
All read and write transactions to the drive works well during normal operation. when I hibernate (suspend-to-disk).

I get the following errors:
------------------
mptbase: ioc0: ERROR – Invalid IOC facts reply, msgLength=0 offset=6
pnp: Failed to activate device 00:09.
pnp: Failed to activate device 00:0a.
------------

Immediately after these messages, Linux hangs as soon as it starts writing the image to the drive. showing the following output.
------------------
Writing Kernel and process data ...
20%...
------------------


When using KDB to trace the problem after the kernel hung.

<ps> shows a running process: Ks2io

when doing Back Trace for Ks2io wheen the kernel hangs, I get the following trace
--------------------
_spin_unlock_irq+0xb
thread_return+0x64
_raw_spin_lock+ox90
__mutex_up_process+0x10
wake_up_process+0x10
suspend_bio_write_page
mutex_lock+0x2a
flush_workqueue+0x51
kblockd_flush+0x10
do_bio_wait+0x1b
suspend_bio_write_page
suepend_bio_write_page+0x41
suspend_compress_write_page+0x137
worker_rw_loop
worker_rw_loop+0x133
worker_rw_loop
kthread+0xf5
schedule_tail_0x45
child_rip+0x45
worker_thread
kthread
child_rip --------------------

It seems that the problem is when suspend2 tries to write to the SSD drive.
I am not sure whether the problem is with the suspend2 module or the mpt driver? I am using kernel 2.6.21.1 x86_64 with fedora core 5 x86_64. MPT driver 3.04
Any insights/recommendations will be greatly appreciated.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/