Re: TCP_MD5 and Intel e1000

[Dunc]

Eric Dumazet wrote:
> On Tue, 22 May 2007 09:33:29 +0200
> Marc Donner <webmaster@xxxxxxxxxxxxx> wrote:
> 
>> Hi,
>>
>> I have tried to set up quagga with tcp-md5 support from kernel. All seems ok
>> with a intel e100 NIC, but as i testetd with a intel e1000 NIC the tcp
>> packets have an invalid md5 digest.
>> If i run tcpdump on the mashine the packets are generated, it shows on the
>> outgoing interface invalid md5 digests.
>> Are there known issues about tcp-md5 and e1000 NICs?
>>
> 
> Hi Marc
> 
> CCed netdev as more appropriate to discuss about network stuff.
> 
> Would be nice if you sent some tcpdump samples to share with us, and tell us
> which exact linux version you tried.
> 
> You could try "ethtool -K tx off", and/or other ethtool -K settings
> 
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

I had this with e1000 NICs and it was just because I had TSO on.

It is disabled with ethtool as Eric suggests

Cheers,

Dunc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/