[it really is text/plain :P] dual port onboard 82546EB checksum errors

[David Ford]

I have a rackmount server that has a dual port onboard 82546EB card.

I've googled and seen this card apparently active with other users but
I seem to only get checksum errors.

[    0.194129] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[    0.194234] Copyright (c) 1999-2006 Intel Corporation.

[    0.194405] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 51 (level,
low) -> IRQ 16
[    0.458732] e1000: 0000:04:09.0: e1000_probe: (PCI:66MHz:64-bit)
00:04:23:cd:93:d2
[    0.489766] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection

[    0.489889] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level,
low) -> IRQ 17
[    0.721071] e1000: 0000:03:07.0: e1000_probe: The EEPROM Checksum
Is Not Valid
[    0.742509] ACPI: PCI interrupt for device 0000:03:07.0 disabled
[    0.742614] e1000: probe of 0000:03:07.0 failed with error -5

[    0.742731] ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level,
low) -> IRQ 18
[    0.973865] e1000: 0000:03:07.1: e1000_probe: The EEPROM Checksum
Is Not Valid
[    0.995304] ACPI: PCI interrupt for device 0000:03:07.1 disabled
[    0.995405] e1000: probe of 0000:03:07.1 failed with error -5


03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
04: 09.0 Ethernet controller: Intel Corporation 82545GM Gigabit
Ethernet Controller (rev 04)


03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
       Subsystem: Intel Corporation Unknown device 341a
       Flags: 66MHz, medium devsel, IRQ 17
       Memory at fe5c0000 (64-bit, non-prefetchable) [size=128K]
       I/O ports at 2040 [size=64]
       Capabilities: [dc] Power Management version 2
       Capabilities: [e4] PCI-X non-bridge device
       Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-

03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) (rev 01)
       Subsystem: Intel Corporation Unknown device 341a
       Flags: 66MHz, medium devsel, IRQ 18
       Memory at fe5e0000 (64-bit, non-prefetchable) [size=128K]
       I/O ports at 2000 [size=64]
       Capabilities: [dc] Power Management version 2
       Capabilities: [e4] PCI-X non-bridge device
       Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-

04:09.0 Ethernet controller: Intel Corporation 82545GM Gigabit
Ethernet Controller (rev 04)
       Subsystem: Intel Corporation PRO/1000 MT Server Adapter
       Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
       Memory at fe8c0000 (64-bit, non-prefetchable) [size=128K]
       Memory at fe880000 (64-bit, non-prefetchable) [size=256K]
       I/O ports at 3000 [size=64]
       Expansion ROM at fe840000 [disabled] [size=256K]
       Capabilities: [dc] Power Management version 2
       Capabilities: [e4] PCI-X non-bridge device


The 82545GM card comes up fine but the 46EB card does not.

This is 2.6.20-gentoo-r6

I'll be happy to fulfill information request if needed.  Any
suggestions that'd help me get the 46EB working?

Thank you,
David
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/