[PATCH] sk98lin: handle pci_enable_device() return value in skge_resume()

From: Dmitriy Monakhov
Date: Fri Feb 23 2007 - 18:18:18 EST


This thread looks dead but issue was't fixed.

Jiri Kosina <jikos@xxxxxxxx> writes:
>> > - pci_enable_device(pdev);
>> > + ret = pci_enable_device(pdev);
>> > + if (ret) {
>> > + printk(KERN_ERR "sk98lin: Cannot enable PCI device %s during resume\n",
>> > + dev->name);
>> > + unregister_netdev(dev);
>> This looks rather wrong - skge_exit() will run unregister_netdev() again.
>
> You are of course right (the problem was also spotted by Russell King).
> This I believe is the correct one for the sk98lin case.
>
> [PATCH] fix sk98lin driver, ignoring return value from pci_enable_device()
>
> add check of return value to _resume() function of sk98lin driver.
>
> Signed-off-by: Jiri Kosina <jikos@xxxxxxxx>
>
> ---
>
> --- a/drivers/net/sk98lin/skge.c
> +++ b/drivers/net/sk98lin/skge.c
> @@ -5070,7 +5070,12 @@ static int skge_resume(struct pci_dev *p
>
> pci_set_power_state(pdev, PCI_D0);
> pci_restore_state(pdev);
> - pci_enable_device(pdev);
> + ret = pci_enable_device(pdev);
> + if (ret) {
> + printk(KERN_WARNING "sk98lin: unable to enable device %s in resume\n",
> + dev->name);
> + goto out_err;
> + }
[snip]
> +out_err:
> + pAC->AllocFlag &= ~SK_ALLOC_IRQ;
> + dev->irq = 0;
> + pci_disable_device(pdev);
<<<<< Ok what happend if we jump here right after pci_disable_device() has
failed, but pci_disable_device() was called anyway, this is wrong and
may be fatal because pdev->enable_cnt may becomes negative.
> +
> + return ret;
> +
> }
> #else
> #define skge_suspend NULL
This is reworked Jiri's patch:

[PATCH] sk98lin: handle pci_enable_device() return value in skge_resume()

Signed-off-by: Monakhov Dmitriy <dmonakhov@xxxxxxxxxx>
---
drivers/net/sk98lin/skge.c | 20 +++++++++++++++-----
1 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index e94ab25..eea753a 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5125,7 +5125,12 @@ static int skge_resume(struct pci_dev *pdev)

pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ printk(KERN_WARNING "sk98lin: unable to enable device %s "
+ "in resume\n", dev->name);
+ goto err_out;
+ }
pci_set_master(pdev);
if (pAC->GIni.GIMacsFound == 2)
ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
@@ -5133,10 +5138,8 @@ static int skge_resume(struct pci_dev *pdev)
ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev);
if (ret) {
printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
- pAC->AllocFlag &= ~SK_ALLOC_IRQ;
- dev->irq = 0;
- pci_disable_device(pdev);
- return -EBUSY;
+ ret = -EBUSY;
+ goto err_out_disable_pdev;
}

netif_device_attach(dev);
@@ -5153,6 +5156,13 @@ static int skge_resume(struct pci_dev *pdev)
}

return 0;
+
+err_out_disable_pdev:
+ pci_disable_device(pdev);
+err_out:
+ pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+ dev->irq = 0;
+ return ret;
}
#else
#define skge_suspend NULL
--
1.4.4.4



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/