Re: [Linux-fbdev-devel] [PATCH] nvidiafb: allow ignoring EDID info

From: Giuseppe Bilotta
Date: Thu Feb 22 2007 - 10:56:20 EST


On 2/22/07, Antonino A. Daplas <adaplas@xxxxxxxxx> wrote:

Ah, my fault. Apply this patch on top.

We're getting closer! The patch now works, and the dmesg has the following info:


ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
nvidiafb: Device ID: 10de0112
fbmon: The EDID Block of Manufacturer: SHP Model: 0x138e is known to be broken,
fbmon: trying to fix monitor timings
nvidiafb: EDID found from BUS2
========================================
Display Information (EDID)
========================================
EDID Version 1.3
Manufacturer: SHP
Model: 138e
Serial#: 0
Year: 1990 Week 0
Display Characteristics:
Monitor Operating Limits: From EDID
H: 30-75KHz V: 60-60Hz DCLK: 170MHz
Digital Display Input
Sync:
Max H-size in cm: 30
Max V-size in cm: 23
Gamma: 2.20
DPMS: Active no, Suspend yes, Standby yes
RGB Color Display
Chroma
RedX: 0.599 RedY: 0.335
GreenX: 0.313 GreenY: 0.552
BlueX: 0.150 BlueY: 0.145
WhiteX: 0.313 WhiteY: 0.328
First DETAILED Timing is preferred
Detailed Timings
160 MHz 1600 1664 1856 2112 1200 1201 1204 1250 -HSync -VSync

Supported VESA Modes
Manufacturer's mask: 0
Standard Timings
1600x1200@60Hz
========================================
nvidiafb: CRTC 1 is currently programmed for DFP
nvidiafb: Using DFP on CRTC 1
nvidiafb: Panel size is 1600 x 1200
nvidiafb: Panel is TMDS
nvidiafb: MTRR set to ON
nvidiafb: Flat panel dithering disabled
Console: switching to colour frame buffer device 200x75
nvidiafb: PCI nVidia NV11 framebuffer (32MB @ 0xE0000000)




However, I'm still getting the same snowy effects, which doesn't come
as a surprise since the actual mode timings used are just the same ...


--
Giuseppe "Oblomov" Bilotta
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/