[PATCH] Fix "deprecated" typoes.

From: Robert P. J. Day
Date: Thu Feb 22 2007 - 04:57:43 EST



Fix remaining misspellings of "depreciated" to "deprecated."

Signed-off-by: Robert P. J. Day <rpjday@xxxxxxxxxxxxxx>

---

happy now, randy? :-)

Documentation/arm/Interrupts | 2 +-
drivers/net/hamradio/Kconfig | 2 +-
drivers/net/wireless/prism54/isl_ioctl.c | 2 +-
include/asm-arm26/io.h | 2 +-
include/asm-arm26/memory.h | 4 ++--
include/asm-arm26/setup.h | 2 +-
6 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts
index 72c93de..0d3dbf1 100644
--- a/Documentation/arm/Interrupts
+++ b/Documentation/arm/Interrupts
@@ -149,7 +149,7 @@ So, what's changed?

3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.

-4. Direct access to SA1111 INTPOL is depreciated. Use set_irq_type instead.
+4. Direct access to SA1111 INTPOL is deprecated. Use set_irq_type instead.

5. A handler is expected to perform any necessary acknowledgement of the
parent IRQ via the correct chip specific function. For instance, if
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 6e90619..36d2c7d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -140,7 +140,7 @@ config BAYCOM_SER_HDX
modems that connect to a serial interface. The driver supports the
ser12 design in half-duplex mode. This is the old driver. It is
still provided in case your serial interface chip does not work with
- the full-duplex driver. This driver is depreciated. To configure
+ the full-duplex driver. This driver is deprecated. To configure
the driver, use the sethdlc utility available in the standard ax25
utilities package. For information on the modems, see
<http://www.baycom.de/> and
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 841b3c1..283be4a 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -3054,7 +3054,7 @@ static const iw_handler prism54_handler[] = {
(iw_handler) prism54_set_wap, /* SIOCSIWAP */
(iw_handler) prism54_get_wap, /* SIOCGIWAP */
(iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* SIOCGIWAPLIST depreciated */
+ (iw_handler) NULL, /* SIOCGIWAPLIST deprecated */
(iw_handler) prism54_set_scan, /* SIOCSIWSCAN */
(iw_handler) prism54_get_scan, /* SIOCGIWSCAN */
(iw_handler) prism54_set_essid, /* SIOCSIWESSID */
diff --git a/include/asm-arm26/io.h b/include/asm-arm26/io.h
index 2aa033b..a5a7a4d 100644
--- a/include/asm-arm26/io.h
+++ b/include/asm-arm26/io.h
@@ -321,7 +321,7 @@ DECLARE_IO(int,l,"")

#define mmiowb()

-/* the following macro is depreciated */
+/* the following macro is deprecated */
#define ioaddr(port) __ioaddr((port))

/*
diff --git a/include/asm-arm26/memory.h b/include/asm-arm26/memory.h
index a65f10b..7c1e5be 100644
--- a/include/asm-arm26/memory.h
+++ b/include/asm-arm26/memory.h
@@ -60,7 +60,7 @@ static inline void *phys_to_virt(unsigned long x)
/*
* Virtual <-> DMA view memory address translations
* Again, these are *only* valid on the kernel direct mapped RAM
- * memory. Use of these is *depreciated*.
+ * memory. Use of these is *deprecated*.
*/
#define virt_to_bus(x) ((unsigned long)(x))
#define bus_to_virt(x) ((void *)((unsigned long)(x)))
@@ -93,7 +93,7 @@ static inline void *phys_to_virt(unsigned long x)
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)

/*
- * We should really eliminate virt_to_bus() here - it's depreciated.
+ * We should really eliminate virt_to_bus() here - it's deprecated.
*/
#define page_to_bus(page) (page_address(page))

diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h
index 1a867b4..670a9f4 100644
--- a/include/asm-arm26/setup.h
+++ b/include/asm-arm26/setup.h
@@ -70,7 +70,7 @@ struct tag_ramdisk {
/* describes where the compressed ramdisk image lives */
/*
* this one accidentally used virtual addresses - as such,
- * its depreciated.
+ * it's deprecated.
*/
#define ATAG_INITRD 0x54410005

--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA

http://fsdev.net/wiki/index.php?title=Main_Page
========================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/