IO window: 00005400-000054ff PREFETCH window: d0000000-d3ffffff MEM window: ac000000-afffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-8fff MEM window: a8400000-b7ffffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found intel_rng: FWH not detected Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled pnp: Device 00:0a activated. 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118c0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118c8 irq 15 scsi0 : ata_piix ata1.00: ATA-6: HTS541080G9AT00, MB4IA60A, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: configured for UDMA/100 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4I PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.61 PQ: 0 ANSI: 5 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 async_tx: api initialized (async) xor: automatically using best checksumming function: pIII_sse pIII_sse : 4942.000 MB/sec xor: using function: pIII_sse (4942.000 MB/sec) TCP cubic registered Using IPI Shortcut mode Time: tsc clocksource has been installed. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 164k freed Write protecting the kernel read-only data: 489k NET: Registered protocol family 1 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 tg3.c:v3.73 (February 12, 2007) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:25:d5:a6:0b eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb input: PC Speaker as /class/input/input3 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c] Real Time Clock Driver v1.12ac eth0 renamed to lan USB Universal Host Controller Interface driver v3.0 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff cs: IO port probe 0x5000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.20-mm1=porcinet uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected NET: Registered protocol family 23 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.20-mm1=porcinet uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation pnp: Device 00:0c activated. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Found dongle: No dongle connected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.20-mm1=porcinet uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001860 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.20-mm1=porcinet uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1e.2 to 64 cs: IO port probe 0x100-0x4ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: new device found, idVendor=0483, idProduct=2016 usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Biometric Coprocessor usb 3-2: Manufacturer: STMicroelectronics usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: bad descriptor, ignoring hub hub: probe of 3-2:1.0 failed with error -5 intel8x0_measure_ac97_clock: measured 55512 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 23 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 22, io mem 0xa8000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.20-mm1=porcinet ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 3-2: USB disconnect, address 2 ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1e.3 to 64 eth0 renamed to wifi MC'97 1 converters and GPIO not ready (0xff00) usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: new device found, idVendor=0483, idProduct=2016 usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Biometric Coprocessor usb 3-2: Manufacturer: STMicroelectronics usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: bad descriptor, ignoring hub hub: probe of 3-2:1.0 failed with error -5 Adding 497972k swap on /dev/sda5. Priority:-1 extents:1 across:497972k EXT3 FS on sda6, internal journal hdaps: IBM ThinkPad T43 detected. hdaps: initial latch check good (0x01). hdaps: device successfully initialized. input: hdaps as /class/input/input4 hdaps: driver successfully loaded. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC] (on-line) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input7 ACPI: Sleep Button (CM) [SLPB] ACPI: Thermal Zone [THM0] (58 C) Time: acpi_pm clocksource has been installed. [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.25.0 20060524 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs Clocksource tsc unstable (delta = -97884907 ns) loop: loaded (max 8 devices) BUG: unable to handle kernel paging request at virtual address e0000000 printing eip: c019e487 *pde = 00000000 Oops: 0000 [#1] last sysfs file: /class/net/lan/carrier Modules linked in: loop radeon drm cpufreq_ondemand thermal fan button processor ac battery vfat fat hdaps snd_intel8x0m snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq pcmcia crc32 snd_timer snd_seq_device irtty_sir sir_dev nsc_ircc ipw2200 irda ieee80211 ieee80211_crypt snd ehci_hcd uhci_hcd crc_ccitt i2c_i801 rtc firmware_class yenta_socket rsrc_nonstatic pcmcia_core soundcore snd_page_alloc intel_agp agpgart pcspkr usbcore tg3 sg sr_mod joydev evdev cdrom unix CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010283 (2.6.20-mm1=porcinet #1) EIP is at count_free+0x9b/0x123 eax: d1c93000 ebx: dabaaed8 ecx: 0e36d000 edx: 0000000f esi: 1fff8250 edi: 0000000a ebp: 00009281 esp: d68c1e68 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process df (pid: 4962, ti=d68c0000 task=d1ce4560 task.ti=d68c0000) Stack: deab49c0 501104b4 00001000 d1c58c00 d68c1ea4 d68c1ef8 d68c0000 c01a0a84 d68c1ea4 d1c554f4 c01505b6 00000000 d68c1ea4 d68c1f08 c01506a8 00004d5a 00001000 0007ed9a 00000000 0007ed99 00000000 0007ed99 00000000 00009280 Call Trace: [] minix_statfs+0x58/0x6d [] vfs_statfs+0x36/0x4e [] vfs_statfs64+0x10/0x21 [] sys_statfs64+0x49/0x80 [] vfs_write+0xfc/0x10c [] syscall_call+0x7/0xb [] fib_inetaddr_event+0x142/0x1a3 ======================= Code: 24 8b 5c b0 fc 85 db 0f 84 9c 00 00 00 8d 04 f5 f8 ff ff ff 89 ea 0f af 43 10 31 c9 29 c2 89 d0 c1 e8 04 8d 34 00 eb 24 8b 43 14 <8a> 04 08 41 89 c2 c0 f8 04 83 e2 0f 83 e0 0f 8b 04 85 40 7c 29 EIP: [] count_free+0x9b/0x123 SS:ESP 0068:d68c1e68