pcim_enable_device BUGs for libata devices in 2.6.20-git6

[Robert Hancock]

I'm seeing BUGs like these on all libata-driven controllers when 
suspending to disk on 2.6.20-git6:

sata_nv 0000:00:07.0: resuming
BUG: at drivers/pci/pci.c:817 pcim_enable_device()

Call Trace:
 [<ffffffff80337d21>] pcim_enable_device+0x8a/0xa5
 [<ffffffff88099d18>] :libata:ata_pci_device_do_resume+0x20/0x59
 [<ffffffff880bb731>] :sata_nv:nv_pci_device_resume+0x1d/0x100
 [<ffffffff8039d2bf>] resume_device+0xcb/0x12c
 [<ffffffff8039d3ac>] dpm_resume+0x8c/0xec
 [<ffffffff8039d456>] device_resume+0x4a/0x5d
 [<ffffffff802a0a33>] pm_suspend_disk+0x160/0x170
 [<ffffffff8029f4b6>] enter_state+0x52/0x1da
 [<ffffffff8029f69c>] state_store+0x5e/0x79
 [<ffffffff802f2b20>] sysfs_write_file+0xe4/0x118
 [<ffffffff80214b58>] vfs_write+0xce/0x177
 [<ffffffff8021553e>] sys_write+0x45/0x6e
 [<ffffffff8025711e>] system_call+0x7e/0x83

It looks like what's happening is that during the "freezing" stage, we 
suspend and then resume the controllers. ata_pci_device_do_suspend only 
calls pci_disable_device if the event is PM_EVENT_SUSPEND but 
ata_pci_device_do_resume calls pcim_enable_device unconditionally. If 
the event was something else, then pcim_enable_device complains because 
the device was previously enabled and never disabled.

Not sure what the best way to fix this is?

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@xxxxxxxxxxxxx
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/