Re: Problem of USB - error 71 : how configure kernel to dongle withchipset

[Thibaud Hulin]

Thanks. In effect, I already post this question in the ndiswrapper list. 
So, they told me that was a problem of USB and of kernel. Then, I'm 
looking for configuration of the kernel, because I compiled the 2.6.19, 
but I no more success. Actually, lsusb recognize, then don't recognize 
the machine a few seconds after. Ndiswrapper can be installed or not, 
that change nothing.

This is the answer from which I was able to touch with you :

--- Thibaud Hulin <hulin.thibaud@xxxxxxxxxx> wrote:

> > So, 30 seconds later, the dongle is not recognize. lsusb give :
> > Bus 001 Device 001: ID 0000:0000
> > So, I can't use my dongle.

If 'lsusb' doesn't see the card, it may indicate problem with your USB host
(either hardware, or host driver or both). You may want to try different
kernels. Until that part works right, ndiswrapper won't be able to 
initialize
the card.

Giri

Alex Davis a écrit :
> As you are using ndiswrapper, you won't much if any help from the kernel developers.
> ndiswrapper taints the kernel as it links closed-source drivers into kernel space.
>
> I strongly advise you to post this question on the ndiswrapper mailing list.
>
> Good luck.
>
> -Alex

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/