Re: [PATCH] Add Broadcom PHY support

[Amy Fong]

> On Fri, 2006-09-15 at 16:15 -0400, Amy Fong wrote:
> > [PATCH] Add Broadcom PHY support
> > 
> > This patch adds a driver to support the bcm5421s and bcm5461s PHY
> > 
> > Kernel version:  linux-2.6.18-rc6
> > 
> > Signed-off-by: Amy Fong 
> 
> Some 5421's need special initialisation (see drivers/net/sungem_phy.c),
> might be worth having them there too. I was also wondering... for
> spidernet, we need to enable the fiber mode on the PHY. Does phylib has
> an API for that ?
> 
> I'd like to look into moving sungem and spidernet over to phylib.
> 
> Ben.


I believe that this fiber enabling can be done by defining config_init in the phy_driver struct.

struct phy_driver {
<snip>
        /* Called to initialize the PHY,
	 * including after a reset */
	int (*config_init)(struct phy_device *phydev);
<snip>
};

ie.

static struct phy_driver bcm5421s_driver = {
<snip>
	.config_init = bcm5421s_phy_config,
<snip>
};

int bcm5421s_phy_config(struct phy_device *phydev)
{
...
	/* enable fiber mode here... */
...
}

Amy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/