[PATCH] i2c: fix broken ds1337 initialization

From: Dirk Eibach
Date: Tue Nov 28 2006 - 08:01:38 EST


On a custom board with ds1337 RTC I found that upgrade from 2.6.15 to 2.6.18 broke RTC support.

The main problem are changes to ds1337_init_client().
When a ds1337 recognizes a problem (e.g. power or clock failure) bit 7 in status register is set. This has to be reset by writing 0 to status register. But since there are only 16 byte written to the chip and the first byte is interpreted as an address, the status register (which is the 16th) is never written.
The other problem is, that initializing all registers to zero is not valid for day, date and month register. Funny enough this is checked by ds1337_detect(), which depends on this values not being zero. So then treated by ds1337_init_client() the ds1337 is not detected anymore, whereas the failure bit in the status register is still set.

This patch applies to kernel 2.6.18.

Signed-off-by: Dirk Stieler <stieler@xxxxxxxx>
Signed-off-by: Dirk Eibach <eibach@xxxxxxxx>
---
--- linux-2.6.18-denx-git.new/drivers/i2c/chips/ds1337.c 2006-10-03 20:15:48.000000000 +0200
+++ linux-2.6.18-denx-git/drivers/i2c/chips/ds1337.c 2006-11-28 12:53:31.210765674 +0100
@@ -385,13 +385,19 @@ static void ds1337_init_client(struct i2

if ((status & 0x80) || (control & 0x80)) {
/* RTC not running */
- u8 buf[16];
+ u8 buf[17]; /* First byte is interpreted as address */
struct i2c_msg msg[1];

dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__);

/* Initialize all, including STATUS and CONTROL to zero */
memset(buf, 0, sizeof(buf));
+
+ /* Write valid values in the date/time registers */
+ buf[4] = 1; /* Day */
+ buf[5] = 1; /* Date */
+ buf[6] = 1; /* Month */
+
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].len = sizeof(buf);



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/