Linux version 2.6.19-rc4 (fcomolli@tycho) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #5 SMP Fri Nov 3 08:38:45 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003feeb000 (ACPI data) BIOS-e820: 000000003feeb000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 261856) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 261856 early_node_map[1] active PFN ranges 0: 0 -> 261856 On node 0 totalpages: 261856 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 253 pages used for memmap HighMem zone: 32227 pages, LIFO batch:7 DMI present. ACPI: RSDP (v000 HP ) @ 0x000f76a0 ACPI: RSDT (v001 HP 309E 0x06040000 LTP 0x00000000) @ 0x3fee5277 ACPI: FADT (v001 HP 309E 0x06040000 LOHR 0x0000005f) @ 0x3feeae88 ACPI: MADT (v001 HP 309E 0x06040000 LOHR 0x0000005f) @ 0x3feeaefc ACPI: BOOT (v001 HP 309E 0x06040000 LTP 0x00000001) @ 0x3feeafd8 ACPI: MCFG (v001 HP 309E 0x06040000 LOHR 0x0000005f) @ 0x3feeaf9c ACPI: SSDT (v001 HP 309E 0x00003000 INTL 0x20030224) @ 0x3fee56d3 ACPI: SSDT (v001 HP 309E 0x00003001 INTL 0x20030224) @ 0x3fee54fb ACPI: SSDT (v001 HP 309E 0x00003000 INTL 0x20030224) @ 0x3fee53e7 ACPI: SSDT (v001 HP 309E 0x00000001 INTL 0x20030224) @ 0x3fee52bb ACPI: DSDT (v001 HP 309E 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1729.732 MHz processor. Built 1 zonelists. Total pages: 259811 Kernel command line: ro root=LABEL=/ pci=assign-busses quiet init=/sbin/initng mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032956k/1047424k available (2058k kernel code, 13776k reserved, 712k data, 164k init, 129920k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03bc000 - 0xc03e5000 ( 164 kB) .data : 0xc030288c - 0xc03b4b94 ( 712 kB) .text : 0xc0100000 - 0xc030288c (2058 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3462.62 BogoMIPS (lpj=6925257) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Total of 1 processors activated (3462.62 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1420k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: c8100000-c81fffff PREFETCH window: d0000000-d7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 4, cardbus bridge: 0000:03:06.0 IO window: 00004400-000044ff IO window: 00004800-000048ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: c8200000-c82fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:03:06.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Reference=27.00 MHz (RefDiv=7) Memory=330.00 Mhz, System=358.00 MHz * Connector 1 is Internal Panel. Head 0, Monitor: LVDS Flat panel (EDID probed) ddc port: 0, dac: -1, tmds: -1 * Connector 2 is VGA. Head -1, Monitor: None ddc port: 2, dac: 0, tmds: -1 * Connector 3 is S-Video. Head -1, Monitor: None ddc port: 2, dac: 1, tmds: -1 radeonfb: detected LVDS panel size from BIOS: 1280x800 radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 160x50 radeonfb (0000:01:00.0): ATI Radeon VS ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Thermal Zone [THR0] (70 C) ACPI: Invalid passive threshold ACPI: Thermal Zone [THR1] (60 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize ACPI: PCI Interrupt 0000:03:06.3[A] -> GSI 22 (level, low) -> IRQ 18 libata version 2.00 loaded. ata_piix 0000:00:1f.1: version 2.00ac6 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATAPI, max MWDMA2 ata1.00: configured for UDMA/100 ata1.01: configured for MWDMA2 scsi1 : ata_piix ata2: port disabled. ignoring. ATA: abnormal status 0xFF on port 0x177 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L532M HR08 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 164k freed input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 ieee1394: Initialized config rom entry `ip1394' Yenta: CardBus bridge found at 0000:03:06.0 [103c:309d] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:03:06.0, mfunc 0x01aa1b02, devctl 0x64 ieee80211_crypt: registered algorithm 'NULL' 8139too Fast Ethernet driver 0.9.28 USB Universal Host Controller Interface driver v3.0 Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff ACPI: PCI Interrupt 0000:03:06.2[C] -> GSI 21 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c8208000-c82087ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4km ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xc8000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 2-1: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 20 (level, low) -> IRQ 23 eth0: RealTek RTL8139 at 0xf98de400, 00:0a:e4:dd:8b:30, IRQ 23 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 23 ACPI: PCI interrupt for device 0000:00:1e.3 disabled ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 23 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection usb 2-1: new full speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a003c175052] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1e.2 to 64 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb intel8x0_measure_ac97_clock: measured 55491 usecs intel8x0: clocking to 48000 EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.27 [Flags: R/O MODULE]. NTFS volume version 3.1. Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k ACPI: Battery Slot [BAT0] (battery present) ACPI: PCI interrupt for device 0000:03:05.0 disabled ieee80211_crypt: unregistered algorithm 'NULL' ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4km ipw2200: Copyright(c) 2003-2006 Intel Corporation PCI: Enabling device 0000:03:05.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 23 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWB] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) ACPI: AC Adapter [AC] (off-line) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ieee80211_crypt: registered algorithm 'WEP' Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs tifm_7xx1: sd card detected in socket 3 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: adding host mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 0 mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 1 mmc0: clock 333333Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: clock 333333Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: starting CMD0 arg 00000000 flags 00000040 tifm_sd tifm_sd0:3: executing opcode 0x0, arg: 0x0, mask: 0x40 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD0): 0/0/0: 00000000 00000000 00000000 00000000 mmc0: clock 333333Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: starting CMD55 arg 00000000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0x0, mask: 0x2140 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000120 00000000 00000000 00000000 mmc0: starting CMD41 arg 00000000 flags 00000061 tifm_sd tifm_sd0:3: executing opcode 0x29, arg: 0x0, mask: 0x1340 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD41): 0/0/0: 00ff8000 00000000 00000000 00000000 mmc0: clock 333333Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: clock 333333Hz busmode 1 powermode 2 cs 1 Vdd 20 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: starting CMD0 arg 00000000 flags 00000040 tifm_sd tifm_sd0:3: executing opcode 0x0, arg: 0x0, mask: 0x40 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD0): 0/0/0: 00ff8000 00000000 00000000 00000000 mmc0: clock 333333Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: starting CMD55 arg 00000000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0x0, mask: 0x2140 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000120 00000000 00000000 00000000 mmc0: starting CMD41 arg 00300000 flags 00000061 tifm_sd tifm_sd0:3: executing opcode 0x29, arg: 0x300000, mask: 0x1340 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD41): 0/0/0: 00ff8000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0x0, mask: 0x2140 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000120 00000000 00000000 00000000 mmc0: starting CMD41 arg 00300000 flags 00000061 tifm_sd tifm_sd0:3: executing opcode 0x29, arg: 0x300000, mask: 0x1340 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD41): 0/0/0: 00ff8000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0x0, mask: 0x2140 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000120 00000000 00000000 00000000 mmc0: starting CMD41 arg 00300000 flags 00000061 tifm_sd tifm_sd0:3: executing opcode 0x29, arg: 0x300000, mask: 0x1340 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD41): 0/0/0: 00ff8000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0x0, mask: 0x2140 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000120 00000000 00000000 00000000 mmc0: starting CMD41 arg 00300000 flags 00000061 tifm_sd tifm_sd0:3: executing opcode 0x29, arg: 0x300000, mask: 0x1340 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD41): 0/0/0: 00ff8000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0x0, mask: 0x2140 tifm_sd tifm_sd0:3: host_status 1001, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000120 00000000 00000000 00000000 mmc0: starting CMD41 arg 00300000 flags 00000061 tifm_sd tifm_sd0:3: executing opcode 0x29, arg: 0x300000, mask: 0x1340 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD41): 0/0/0: 80ff8000 00000000 00000000 00000000 mmc0: starting CMD2 arg 00000000 flags 00000067 tifm_sd tifm_sd0:3: executing opcode 0x2, arg: 0x0, mask: 0x1240 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD2): 0/0/0: 03534453 44323536 55007fb7 f9004855 mmc0: starting CMD3 arg 00000000 flags 00000065 tifm_sd tifm_sd0:3: executing opcode 0x3, arg: 0x0, mask: 0x1640 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD3): 0/0/0: a95c0520 00000000 00000000 00000000 mmc0: starting CMD2 arg 00000000 flags 00000067 tifm_sd tifm_sd0:3: executing opcode 0x2, arg: 0x0, mask: 0x1240 tifm_sd tifm_sd0:3: host_status 80, fifo_status 0 mmc0: req done (CMD2): 1/0/0: 00000000 00000000 00000000 00000000 tifm_sd tifm_sd0:3: executing opcode 0x2, arg: 0x0, mask: 0x1240 tifm_sd tifm_sd0:3: host_status 80, fifo_status 0 mmc0: req done (CMD2): 1/0/0: 00000000 00000000 00000000 00000000 tifm_sd tifm_sd0:3: executing opcode 0x2, arg: 0x0, mask: 0x1240 tifm_sd tifm_sd0:3: host_status 80, fifo_status 0 mmc0: req done (CMD2): 1/0/0: 00000000 00000000 00000000 00000000 tifm_sd tifm_sd0:3: executing opcode 0x2, arg: 0x0, mask: 0x1240 tifm_sd tifm_sd0:3: host_status 80, fifo_status 0 mmc0: req done (CMD2): 1/0/0: 00000000 00000000 00000000 00000000 mmc0: clock 333333Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: starting CMD9 arg a95c0000 flags 00000007 tifm_sd tifm_sd0:3: executing opcode 0x9, arg: 0xa95c0000, mask: 0x2200 tifm_sd tifm_sd0:3: host_status 80, fifo_status 0 mmc0: req done (CMD9): 1/0/0: 00000000 00000000 00000000 00000000 tifm_sd tifm_sd0:3: executing opcode 0x9, arg: 0xa95c0000, mask: 0x2200 tifm_sd tifm_sd0:3: host_status 80, fifo_status 0 mmc0: req done (CMD9): 1/0/0: 00000000 00000000 00000000 00000000 tifm_sd tifm_sd0:3: executing opcode 0x9, arg: 0xa95c0000, mask: 0x2200 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD9): 0/0/0: 00260032 1f5983c4 e492cfff 9240401b mmc0: starting CMD7 arg a95c0000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x7, arg: 0xa95c0000, mask: 0x2100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD7): 0/0/0: 00000700 00000000 00000000 00000000 mmc0: clock 333333Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: starting CMD55 arg a95c0000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0xa95c0000, mask: 0x2100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000920 00000000 00000000 00000000 mmc0: starting CMD51 arg 00000000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x33, arg: 0x0, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: host_status 0, fifo_status 1 tifm_sd tifm_sd0:3: host_status 8, fifo_status 0 mmc0: req done (CMD51): 0/0/0: 00000920 00000000 00000000 00000000 mmc0: starting CMD7 arg 00000000 flags 00000000 tifm_sd tifm_sd0:3: executing opcode 0x7, arg: 0x0, mask: 0x2000 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD7): 0/0/0: 00000920 00000000 00000000 00000000 mmc0: selected 24.000MHz transfer rate mmc0: clock 24000000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 2 mmc0: starting CMD7 arg a95c0000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x7, arg: 0xa95c0000, mask: 0x2100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD7): 0/0/0: 00000700 00000000 00000000 00000000 mmc0: starting CMD55 arg a95c0000 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x37, arg: 0xa95c0000, mask: 0x2100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD55): 0/0/0: 00000920 00000000 00000000 00000000 mmc0: starting CMD6 arg 00000002 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x6, arg: 0x2, mask: 0x2100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD6): 0/0/0: 00000920 00000000 00000000 00000000 mmc0: clock 24000000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 2 tifm_sd tifm_sd0:3: Setting bus width 2, power 2 mmc0: starting CMD16 arg 00000200 flags 00000015 tifm_sd tifm_sd0:3: executing opcode 0x10, arg: 0x200, mask: 0x2100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD16): 0/0/0: 00000900 00000000 00000000 00000000 mmcblk0: mmc0:a95c SD256 247040KiB mmcblk0:<7>mmc0: starting CMD18 arg 00000000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x0, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 p1 mmc0: starting CMD18 arg 0f130000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf130000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f13f000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf13f000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f138000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf138000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f120000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf120000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f13e000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf13e000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f10e000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf10e000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00000000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x0, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00001000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00002000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x2000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00003000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x3000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00004000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x4000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00005000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x5000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00006000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x6000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00007000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x7000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00008000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x8000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00009000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x9000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000a000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xa000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000b000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xb000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000c000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xc000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000d000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xd000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000e000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xe000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000f000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00010000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x10000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00040000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x40000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f0fca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf0fca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f130000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf130000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f113a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf113a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f13f000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf13f000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f10ca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf10ca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f138000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf138000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f0f4a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf0f4a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f120000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf120000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f112a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf112a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f13e000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf13e000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f0e2a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf0e2a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f10e000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf10e000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000ca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00000000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x0, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000da00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xda00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000ea00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xea00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000fa00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xfa00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00010a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x10a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001ba00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1ba00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001ca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1ca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001da00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1da00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001ea00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1ea00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001fa00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1fa00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00004000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x4000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00003000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x3000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00001000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00002000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x2000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00005000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x5000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00006000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x6000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00007000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x7000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00008000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x8000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00009000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x9000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000a000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xa000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000b000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xb000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000c000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xc000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000d000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xd000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000e000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xe000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000f000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00010000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x10000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00040000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x40000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f0fca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf0fca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f113a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf113a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f10ca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf10ca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f0f4a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf0f4a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f112a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf112a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0f0e2a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xf0e2a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000ca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000da00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xda00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000ea00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xea00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0000fa00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0xfa00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00010a00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x10a00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001ba00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1ba00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001ca00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1ca00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001da00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1da00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001ea00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1ea00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 0001fa00 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1fa00, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00003000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x3000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00002000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x2000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00001000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x1000, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 mmc0: starting CMD18 arg 00000000 flags 00000035 tifm_sd tifm_sd0:3: executing opcode 0x12, arg: 0x0, mask: 0xb100 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 tifm_sd tifm_sd0:3: executing opcode 0xc, arg: 0x0, mask: 0x2900 tifm_sd tifm_sd0:3: host_status 8, fifo_status 1 tifm_sd tifm_sd0:3: host_status 1, fifo_status 0 mmc0: req done (CMD18): 0/0/0: 00000900 00000000 00000000 00000000 tifm_7xx1: demand removing card from socket 3 mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 tifm_sd tifm_sd0:3: Setting bus width 0, power 0 Disabling non-boot CPUs ... Stopping tasks: ========================================================================================| Shrinking memory... -\done (13527 pages freed) Suspending console(s) ACPI: PCI interrupt for device 0000:03:06.3 disabled ohci1394 does not fully support suspend and resume yet ACPI: PCI interrupt for device 0000:03:06.0 disabled eth1: Going into suspend... ACPI: PCI interrupt for device 0000:03:05.0 disabled radeonfb (0000:01:00.0): suspending to state: 1... ACPI: PCI interrupt for device 0000:00:1e.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled .... swsusp: Need to copy 84146 pages Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. swsusp: Restoring Highmem PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1e.2 at offset 1 (was 2900007, writing 2900000) PCI: Enabling device 0000:00:1e.2 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1e.2 to 64 PM: Writing back config space on device 0000:00:1e.3 at offset 1 (was 2900005, writing 2900000) PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata2: port disabled. ignoring. ATA: abnormal status 0xFF on port 0x177 radeonfb (0000:01:00.0): resuming from state: 1... PCI: Setting latency timer of device 0000:01:00.0 to 64 eth1: Coming out of suspend... ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 23 PM: Writing back config space on device 0000:03:05.0 at offset 1 (was 2900112, writing 2900106) PM: Writing back config space on device 0000:03:06.0 at offset f (was 3c4010a, writing 5c0010a) PM: Writing back config space on device 0000:03:06.0 at offset 3 (was 824008, writing 82a810) ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 22 (level, low) -> IRQ 18 PCI: Enabling device 0000:03:06.3 (0000 -> 0002) ACPI: PCI Interrupt 0000:03:06.3[A] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:03:06.3 to 64 usbdev2.3_ep00: PM: resume from 0, parent 2-1 still 1 hci_usb 2-1:1.0: PM: resume from 1, parent 2-1 still 1 usbdev2.3_ep81: PM: resume from 0, parent 2-1:1.0 still 1 usbdev2.3_ep82: PM: resume from 0, parent 2-1:1.0 still 1 usbdev2.3_ep02: PM: resume from 0, parent 2-1:1.0 still 1 hci_usb 2-1:1.1: PM: resume from 1, parent 2-1 still 1 usb 2-1:1.2: PM: resume from 1, parent 2-1 still 1 usbdev2.3_ep84: PM: resume from 0, parent 2-1:1.2 still 1 usbdev2.3_ep04: PM: resume from 0, parent 2-1:1.2 still 1 usb 2-1:1.3: PM: resume from 1, parent 2-1 still 1 usbdev2.3_ep83: PM: resume from 0, parent 2-1:1.1 still 1 usbdev2.3_ep03: PM: resume from 0, parent 2-1:1.1 still 1 hci0: PM: resume from 0, parent 2-1:1.0 still 1 Restarting tasks... done Enabling non-boot CPUs ... ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands for [OpcodeName unavailable] [20060707] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.AC__._PSR] (Node c18ea4b4), AE_TIME ACPI Exception (acpi_ac-0096): AE_TIME, Error reading AC Adapter state [20060707] ata1.00: configured for UDMA/100 ata1.01: configured for MWDMA2 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back [drm] Loading R300 Microcode usb 2-1: USB disconnect, address 3 usb 2-1: new full speed USB device using uhci_hcd and address 4 usb 2-1: configuration #1 chosen from 1 choice ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWB]