Re: Bcm43xx softMac Driver in 2.6.18

[Ray Lee]

Rafael J. Wysocki wrote:
>> 2.6.18 vanilla and 2.6.18 with your patch both lock my system hard
>> with bcm43xx. I've got an HP/Compaq nx6125 laptop. Symptoms are that
>> it will associate fine on its own and send traffic to/fro upon ifup,
>> but when I do an iwconfig, ifdown, ifup to change the access point,
>> the system locks (somewhat randomly) during one of those operations.
>> Well, the iwconfig or the ifup, actually.
> 
> I have observed similar symptoms on HPC nx6325, although I haven't managed
> to get the adapter associate with an AP.

Yeah, I'm having the same troubles. Carefully watching the iwconfig
results showed me that only half of the time did my `iwconfig eth1 essid
AccessPointName` actually take. (It listed the essid of the ap I told it
to associate with, but then showed "Access Point: Invalid" or words to
that effect, until I issued the exact same iwconfig again.)

So, try it twice, double check the iwconfig output, then try bringing up
the interface. Though that seems awfully difficult to do as well (DHCP
is just sending out stuff with nothing coming back).

When I switch consoles while DHCP is plaintively asking for an IP, and
issue *another* iwconfig with the same essid, then it seems to kick
something in the driver and DHCP immediately associates. Happened twice
for me so far, though that could merely be a coincidence.

Ray
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/