Re: [PATCH] watchdog: add support for w83697hg chip

[Samuel Tardieu]

On  6/09, Pádraig Brady wrote:

| So in the case the BIOS sets the watchdog to 4 mins
| for example the 2 drivers are a little different.
| 
| W83627HF resets to timeout seconds on module load
| W83697HG resets to timeout seconds on /dev/watchdog open

Yes, I'm reluctant at changing anything set by the BIOS before the first
*use* of the module. In particular, if the watchdog was not activated by
default in the BIOS, I'd prefer the box not to reboot just because the
module was loaded (maybe by mistake) if no daemon open /dev/watchdog
at least once.

In particular, some boxes may take a long time to boot, e.g. if fscks are
needed; if the module is loaded by an initrd before filesystems are mounted
and fscks are done, if I'm not mistaken the box could reboot in loop
every time in the middle of fscks.

  Sam

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/