2.6.18-rc5-mm1 unusual IRQ number for VIA device

[Jay Cliburn]

Running 2.6.18-rc5.mm1 on an Asus M2V mainboard with dual-core Athlon 
cpu, the onboard audio device gets assigned and IRQ of 8410.  Under 
2.6.18-rc4-mm3, the same device gets assigned IRQ 17.  Is this a way to 
get around this?

/proc/interrupts:
           CPU0       CPU1
  0:     525177          0   IO-APIC-edge     timer
  1:       3016          0   IO-APIC-edge     i8042
  6:          5          0   IO-APIC-edge     floppy
  7:          0          0   IO-APIC-edge     parport0
  8:          0          0   IO-APIC-edge     rtc
  9:          0          0   IO-APIC-fasteoi  acpi
 12:          4          0   IO-APIC-edge     i8042
 14:      18433          0   IO-APIC-edge     ide0
 20:      16017          0   IO-APIC-fasteoi  uhci_hcd:usb1
 21:      66080          0   IO-APIC-fasteoi  uhci_hcd:usb3, 
ehci_hcd:usb5, libata
 22:          0          0   IO-APIC-fasteoi  uhci_hcd:usb2
 23:          0          0   IO-APIC-fasteoi  uhci_hcd:usb4
 36:       4600          0   IO-APIC-fasteoi  eth0
8410:        193          0   PCI-MSI-<NULL>  HDA Intel
NMI:        180         91
LOC:     525078     525029
ERR:          0

And here's the lspci output for the audio device:
08:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio 
Controller (rev 10)
        Subsystem: ASUSTeK Computer Inc. Unknown device 81e7
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 8410
        Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: 64bit+ 
Queue=0/0 Enable+
                Address: 00000000fee00000  Data: 406a
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, 
ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown, 
Port 0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0
        Capabilities: [100] Virtual Channel
00: 06 11 88 32 06 04 10 00 10 00 03 04 10 00 00 00
10: 04 c0 ff fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e7 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 01 01 00 00
40: 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 70 81 00 00 00 e0 fe 00 00 00 00 6a 40 00 00
70: 10 00 91 00 00 00 00 00 00 00 30 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/