Re: Patch to make VIA sata board bootable again.
From: Johnny Strom
Date: Fri Sep 01 2006 - 08:41:13 EST
Sergio Monteiro Basto wrote:
Hi, Can you give me the information of interrupts
cat /proc/interrupts
XT_PIC or IO-APIC-edge/level ?
Here it is.
cat /proc/interrupts
CPU0
0: 1692278 XT-PIC timer
1: 40 XT-PIC i8042
2: 0 XT-PIC cascade
7: 414568 XT-PIC libata, ohci1394, uhci_hcd:usb2,
uhci_hcd:usb3, radeon@pci:0000:01:00.0
8: 4 XT-PIC rtc
9: 0 XT-PIC acpi
10: 534456 XT-PIC sk98lin, ehci_hcd:usb1, VIA8237, eth0
11: 0 XT-PIC uhci_hcd:usb4, uhci_hcd:usb5
12: 130 XT-PIC i8042
14: 53 XT-PIC ide0
15: 101 XT-PIC ide1
NMI: 0
ERR: 0
Johnny
On Fri, 2006-09-01 at 11:15 +0300, Johnny Strom wrote:
Hello
The quirks.c update that went into 2.6.16.17 made an VIA machine here
non bootable from an sata drive (via_sata), the error is:
"ATA1 qc timout"
"Failed to set xfermode".
And later kernel panic becouse no sata disk was found.
I tracked it down to the quirk update in 2.6.16.17. Below is a patch
against 2.6.17.11 that reverses the uppdate and makse the system
bootable again.
Another option is to find out the PCI_DEVICE_ID_VIA for the motherboard
in question but I could not get that info. Dose someone have an idea how
to find that info? then I can provide an patch that adds the right
PCI_DEVICE_ID_VIA for my motherboard.
diff -ur linux-2.6.17.11-org/drivers/pci/quirks.c
linux-2.6.17.11/drivers/pci/quirks.c
--- linux-2.6.17.11-org/drivers/pci/quirks.c 2006-09-01
10:38:31.135747500 +0300
+++ linux-2.6.17.11/drivers/pci/quirks.c 2006-09-01 10:42:28.870605000 +0300
@@ -652,13 +652,7 @@
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
Signed-off-by: johnny.strom@xxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/