[git patches] libata fixes
From: Jeff Garzik
Date: Thu Aug 24 2006 - 04:11:04 EST
Please pull from 'upstream-greg' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-greg
to receive the following updates:
drivers/scsi/ata_piix.c | 84 +++++++++++++++++++++++++-------
drivers/scsi/libata-core.c | 2
drivers/scsi/pdc_adma.c | 3 -
drivers/scsi/sata_via.c | 117 +++++++++++++++++++++++++++++++++++++++++++--
4 files changed, 180 insertions(+), 26 deletions(-)
Albert Lee:
libata: Use ATA_FLAG_PIO_POLLING for pdc_adma
Martin Hicks:
libata: PHY reset requires writing 0x4 to SControl
Tejun Heo:
ata_piix: fix ghost device probing by honoring PCS present bits
ata_piix: ignore PCS on ICH5
ata_piix: implement force_pcs module parameter
sata_via: use old SCR access pattern on vt6420
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 5e8afc8..2d20caf 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -390,7 +390,8 @@ #endif
/* ich5_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR |
+ PIIX_FLAG_IGNORE_PCS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -467,6 +468,11 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+static int force_pcs = 0;
+module_param(force_pcs, int, 0444);
+MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around "
+ "device mis-detection (0=default, 1=ignore PCS, 2=honor PCS)");
+
/**
* piix_pata_cbl_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
@@ -531,27 +537,25 @@ static void piix_pata_error_handler(stru
}
/**
- * piix_sata_prereset - prereset for SATA host controller
+ * piix_sata_present_mask - determine present mask for SATA host controller
* @ap: Target port
*
- * Reads and configures SATA PCI device's PCI config register
- * Port Configuration and Status (PCS) to determine port and
- * device availability. Return -ENODEV to skip reset if no
- * device is present.
+ * Reads SATA PCI device's PCI config register Port Configuration
+ * and Status (PCS) to determine port and device availability.
*
* LOCKING:
* None (inherited from caller).
*
* RETURNS:
- * 0 if device is present, -ENODEV otherwise.
+ * determined present_mask
*/
-static int piix_sata_prereset(struct ata_port *ap)
+static unsigned int piix_sata_present_mask(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
struct piix_host_priv *hpriv = ap->host_set->private_data;
const unsigned int *map = hpriv->map;
int base = 2 * ap->hard_port_no;
- unsigned int present = 0;
+ unsigned int present_mask = 0;
int port, i;
u16 pcs;
@@ -564,24 +568,52 @@ static int piix_sata_prereset(struct ata
continue;
if ((ap->flags & PIIX_FLAG_IGNORE_PCS) ||
(pcs & 1 << (hpriv->map_db->present_shift + port)))
- present = 1;
+ present_mask |= 1 << i;
}
- DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n",
- ap->id, pcs, present);
+ DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
+ ap->id, pcs, present_mask);
- if (!present) {
- ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n");
- ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
- return 0;
+ return present_mask;
+}
+
+/**
+ * piix_sata_softreset - reset SATA host port via ATA SRST
+ * @ap: port to reset
+ * @classes: resulting classes of attached devices
+ *
+ * Reset SATA host port via ATA SRST. On controllers with
+ * reliable PCS present bits, the bits are used to determine
+ * device presence.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+static int piix_sata_softreset(struct ata_port *ap, unsigned int *classes)
+{
+ unsigned int present_mask;
+ int i, rc;
+
+ present_mask = piix_sata_present_mask(ap);
+
+ rc = ata_std_softreset(ap, classes);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ if (!(present_mask & (1 << i)))
+ classes[i] = ATA_DEV_NONE;
}
- return ata_std_prereset(ap);
+ return 0;
}
static void piix_sata_error_handler(struct ata_port *ap)
{
- ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL,
+ ata_bmdma_drive_eh(ap, ata_std_prereset, piix_sata_softreset, NULL,
ata_std_postreset);
}
@@ -785,6 +817,7 @@ static int __devinit piix_check_450nx_er
}
static void __devinit piix_init_pcs(struct pci_dev *pdev,
+ struct ata_port_info *pinfo,
const struct piix_map_db *map_db)
{
u16 pcs, new_pcs;
@@ -798,6 +831,18 @@ static void __devinit piix_init_pcs(stru
pci_write_config_word(pdev, ICH5_PCS, new_pcs);
msleep(150);
}
+
+ if (force_pcs == 1) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "force ignoring PCS (0x%x)\n", new_pcs);
+ pinfo[0].host_flags |= PIIX_FLAG_IGNORE_PCS;
+ pinfo[1].host_flags |= PIIX_FLAG_IGNORE_PCS;
+ } else if (force_pcs == 2) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "force honoring PCS (0x%x)\n", new_pcs);
+ pinfo[0].host_flags &= ~PIIX_FLAG_IGNORE_PCS;
+ pinfo[1].host_flags &= ~PIIX_FLAG_IGNORE_PCS;
+ }
}
static void __devinit piix_init_sata_map(struct pci_dev *pdev,
@@ -906,7 +951,8 @@ static int piix_init_one (struct pci_dev
if (host_flags & ATA_FLAG_SATA) {
piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
- piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]);
+ piix_init_pcs(pdev, port_info,
+ piix_map_db_table[ent->driver_data]);
}
/* On ICH5, some BIOSen disable the interrupt using the
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 16fc2dd..73dd6c8 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2746,7 +2746,7 @@ int sata_std_hardreset(struct ata_port *
if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
return rc;
- scontrol = (scontrol & 0x0f0) | 0x302;
+ scontrol = (scontrol & 0x0f0) | 0x304;
if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol)))
return rc;
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index d1f38c3..efc8fff 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -183,7 +183,8 @@ static struct ata_port_info adma_port_in
{
.sht = &adma_ata_sht,
.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
- ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO,
+ ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_POLLING,
.pio_mask = 0x10, /* pio4 */
.udma_mask = 0x1f, /* udma0-4 */
.port_ops = &adma_ata_ops,
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 03baec2..01d4036 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -74,6 +74,7 @@ enum {
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void vt6420_error_handler(struct ata_port *ap);
static const struct pci_device_id svia_pci_tbl[] = {
{ 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
@@ -107,7 +108,38 @@ static struct scsi_host_template svia_sh
.bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations svia_sata_ops = {
+static const struct ata_port_operations vt6420_sata_ops = {
+ .port_disable = ata_port_disable,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = vt6420_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static const struct ata_port_operations vt6421_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -141,13 +173,13 @@ static const struct ata_port_operations
.host_stop = ata_host_stop,
};
-static struct ata_port_info svia_port_info = {
+static struct ata_port_info vt6420_port_info = {
.sht = &svia_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x7f,
- .port_ops = &svia_sata_ops,
+ .port_ops = &vt6420_sata_ops,
};
MODULE_AUTHOR("Jeff Garzik");
@@ -170,6 +202,81 @@ static void svia_scr_write (struct ata_p
outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
}
+/**
+ * vt6420_prereset - prereset for vt6420
+ * @ap: target ATA port
+ *
+ * SCR registers on vt6420 are pieces of shit and may hang the
+ * whole machine completely if accessed with the wrong timing.
+ * To avoid such catastrophe, vt6420 doesn't provide generic SCR
+ * access operations, but uses SStatus and SControl only during
+ * boot probing in controlled way.
+ *
+ * As the old (pre EH update) probing code is proven to work, we
+ * strictly follow the access pattern.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+static int vt6420_prereset(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ unsigned long timeout = jiffies + (HZ * 5);
+ u32 sstatus, scontrol;
+ int online;
+
+ /* don't do any SCR stuff if we're not loading */
+ if (!ATA_PFLAG_LOADING)
+ goto skip_scr;
+
+ /* Resume phy. This is the old resume sequence from
+ * __sata_phy_reset().
+ */
+ svia_scr_write(ap, SCR_CONTROL, 0x300);
+ svia_scr_read(ap, SCR_CONTROL); /* flush */
+
+ /* wait for phy to become ready, if necessary */
+ do {
+ msleep(200);
+ if ((svia_scr_read(ap, SCR_STATUS) & 0xf) != 1)
+ break;
+ } while (time_before(jiffies, timeout));
+
+ /* open code sata_print_link_status() */
+ sstatus = svia_scr_read(ap, SCR_STATUS);
+ scontrol = svia_scr_read(ap, SCR_CONTROL);
+
+ online = (sstatus & 0xf) == 0x3;
+
+ ata_port_printk(ap, KERN_INFO,
+ "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
+ online ? "up" : "down", sstatus, scontrol);
+
+ /* SStatus is read one more time */
+ svia_scr_read(ap, SCR_STATUS);
+
+ if (!online) {
+ /* tell EH to bail */
+ ehc->i.action &= ~ATA_EH_RESET_MASK;
+ return 0;
+ }
+
+ skip_scr:
+ /* wait for !BSY */
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+ return 0;
+}
+
+static void vt6420_error_handler(struct ata_port *ap)
+{
+ return ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset,
+ NULL, ata_std_postreset);
+}
+
static const unsigned int svia_bar_sizes[] = {
8, 4, 8, 4, 16, 256
};
@@ -210,7 +317,7 @@ static void vt6421_init_addrs(struct ata
static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
{
struct ata_probe_ent *probe_ent;
- struct ata_port_info *ppi = &svia_port_info;
+ struct ata_port_info *ppi = &vt6420_port_info;
probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
@@ -239,7 +346,7 @@ static struct ata_probe_ent *vt6421_init
probe_ent->sht = &svia_sht;
probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY;
- probe_ent->port_ops = &svia_sata_ops;
+ probe_ent->port_ops = &vt6421_sata_ops;
probe_ent->n_ports = N_PORTS;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/