Re: [PATCH 6/6] IP100A Solve host error problem when in low performance embedded

[Jesse Huang]

Hi Jeff:

    I will follow those suggestions. Thanks.

Jesse
----- Original Message ----- 
From: "Jeff Garzik" <jgarzik@xxxxxxxxx>
To: "Jesse Huang" <jesse@xxxxxxxxxxxxx>
Cc: <linux-kernel@xxxxxxxxxxxxxxx>; <netdev@xxxxxxxxxxxxxxx>;
<akpm@xxxxxxxx>
Sent: Friday, August 18, 2006 7:17 PM
Subject: Re: [PATCH 6/6] IP100A Solve host error problem when in low
performance embedded


Jesse Huang wrote:
> From: Jesse Huang <jesse@xxxxxxxxxxxxx>
>
> Solve host error problem when in low performance embedded
>
> Change Logs:
>     Solve host error problem when in low performance embedded
>
> ---
>
>  drivers/net/sundance.c |   26 ++++++++++++++++++++++----
>  1 files changed, 22 insertions(+), 4 deletions(-)
>
> 78ff57ea887c19b7552342e990375f5e2bb10af9
> diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
> index c7c22f0..94ba6ca 100755
> --- a/drivers/net/sundance.c
> +++ b/drivers/net/sundance.c
> @@ -1075,7 +1075,7 @@ reset_tx (struct net_device *dev)
>  struct sk_buff *skb;
>  int i;
>  int irq = in_interrupt();
> -
> + tasklet_kill(&np->tx_tasklet);

NAK, it is a bug to call tasklet_kill() from inside an interrupt.


> @@ -1646,6 +1646,13 @@ static int netdev_close(struct net_devic
>  struct sk_buff *skb;
>  int i;
>
> + /* Wait and kill tasklet */
> + tasklet_kill(&np->rx_tasklet);
> + tasklet_kill(&np->tx_tasklet);
> +   np->cur_tx = np->dirty_tx = 0;

fix source code indent


> + np->cur_task = 0;
> + np->last_tx=0;

needs whitespace:  s/=/ = /


>  netif_stop_queue(dev);
>
>  if (netif_msg_ifdown(np)) {
> @@ -1666,9 +1673,19 @@ static int netdev_close(struct net_devic
>  /* Stop the chip's Tx and Rx processes. */
>  iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
>
> - /* Wait and kill tasklet */
> - tasklet_kill(&np->rx_tasklet);
> - tasklet_kill(&np->tx_tasklet);
> +    for(i=2000;i> 0;i--) {
> + if((readl(ioaddr + DMACtrl)&0xC000) == 0)break;
> + mdelay(1);
> +    }

(1) fix indentation

(2) add whitespace to 'for' loop

(3) use ioread32(), not readl()

(4) are you certain that DMACtrl should be read as a 32-bit register?
In other code, you treat it as a 16-bit register.



> +    writew(GlobalReset | DMAReset | FIFOReset |NetworkReset, ioaddr
+ASICCtrl + 2);

(5) use iowrite16() not writew()


> +    for(i=2000;i >0;i--)
> +    {
> + if((readw(ioaddr + ASICCtrl +2)&ResetBusy) == 0)
> +     break;
> + mdelay(1);
> +    }

(6) fix indentation to match the rest of the driver

(7) use ioread16(), not readw()

(8) add whitespace to 'for' loop


>  #ifdef __i386__
>  if (netif_msg_hw(np)) {
> @@ -1706,6 +1723,7 @@ #endif /* __i386__ debugging only */
>  }
>  }
>  for (i = 0; i < TX_RING_SIZE; i++) {
> + np->tx_ring[i].next_desc=0;

(9) add whitespace to assignment:  s/=/ = /


>  skb = np->tx_skbuff[i];
>  if (skb) {
>  pci_unmap_single(np->pci_dev,


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/