[PATCH 3/3] ppc32: board-specific part of fs_enet update

From: Vitaly Bordug
Date: Mon Aug 07 2006 - 19:53:54 EST



This contains board-specific portion to respect driver changes (for 8272ads
, 885ads and 866ads). Altered platform_data structures as well as initial
setup routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in
arch/powerpc.

Signed-off-by: Vitaly Bordug <vbordug@xxxxxxxxxxxxx>
---

arch/ppc/platforms/85xx/mpc8560_ads.c | 89 ++++++++++++
arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 19 +++
arch/ppc/platforms/mpc8272ads_setup.c | 154 ++++++++++++---------
arch/ppc/platforms/mpc866ads_setup.c | 192 +++++++++++++-------------
arch/ppc/platforms/mpc885ads_setup.c | 175 +++++++++---------------
arch/ppc/platforms/pq2ads_pd.h | 82 -----------
arch/ppc/syslib/mpc85xx_devices.c | 89 ++++++++++++
arch/ppc/syslib/mpc8xx_devices.c | 8 +
arch/ppc/syslib/mpc8xx_sys.c | 6 +
arch/ppc/syslib/pq2_devices.c | 5 +
arch/ppc/syslib/pq2_sys.c | 3
include/asm-ppc/cpm2.h | 95 +++++++++++++
include/asm-ppc/mpc8260.h | 1
include/asm-ppc/mpc8xx.h | 1
include/linux/fs_enet_pd.h | 50 +++----
15 files changed, 578 insertions(+), 391 deletions(-)

diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
index d90cd24..94badaf 100644
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c
@@ -29,6 +29,7 @@ #include <linux/serial_core.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
+#include <linux/fs_enet_pd.h>

#include <asm/system.h>
#include <asm/pgtable.h>
@@ -58,6 +59,71 @@ #include <syslib/ppc85xx_setup.h>
* Setup the architecture
*
*/
+static void init_fcc_ioports(void)
+{
+ struct immap *immap;
+ struct io_port *io;
+ u32 tempval;
+
+ immap = cpm2_immr;
+
+ io = &immap->im_ioport;
+ /* FCC2/3 are on the ports B/C. */
+ tempval = in_be32(&io->iop_pdirb);
+ tempval &= ~PB2_DIRB0;
+ tempval |= PB2_DIRB1;
+ out_be32(&io->iop_pdirb, tempval);
+
+ tempval = in_be32(&io->iop_psorb);
+ tempval &= ~PB2_PSORB0;
+ tempval |= PB2_PSORB1;
+ out_be32(&io->iop_psorb, tempval);
+
+ tempval = in_be32(&io->iop_pparb);
+ tempval |= (PB2_DIRB0 | PB2_DIRB1);
+ out_be32(&io->iop_pparb, tempval);
+
+ tempval = in_be32(&io->iop_pdirb);
+ tempval &= ~PB3_DIRB0;
+ tempval |= PB3_DIRB1;
+ out_be32(&io->iop_pdirb, tempval);
+
+ tempval = in_be32(&io->iop_psorb);
+ tempval &= ~PB3_PSORB0;
+ tempval |= PB3_PSORB1;
+ out_be32(&io->iop_psorb, tempval);
+
+ tempval = in_be32(&io->iop_pparb);
+ tempval |= (PB3_DIRB0 | PB3_DIRB1);
+ out_be32(&io->iop_pparb, tempval);
+
+ tempval = in_be32(&io->iop_pdirc);
+ tempval |= PC3_DIRC1;
+ out_be32(&io->iop_pdirc, tempval);
+
+ tempval = in_be32(&io->iop_pparc);
+ tempval |= PC3_DIRC1;
+ out_be32(&io->iop_pparc, tempval);
+
+ /* Port C has clocks...... */
+ tempval = in_be32(&io->iop_psorc);
+ tempval &= ~(CLK_TRX);
+ out_be32(&io->iop_psorc, tempval);
+
+ tempval = in_be32(&io->iop_pdirc);
+ tempval &= ~(CLK_TRX);
+ out_be32(&io->iop_pdirc, tempval);
+ tempval = in_be32(&io->iop_pparc);
+ tempval |= (CLK_TRX);
+ out_be32(&io->iop_pparc, tempval);
+
+ /* Configure Serial Interface clock routing.
+ * First, clear all FCC bits to zero,
+ * then set the ones we want.
+ */
+ immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK);
+ immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE;
+}

static void __init
mpc8560ads_setup_arch(void)
@@ -66,6 +132,7 @@ mpc8560ads_setup_arch(void)
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
+ struct fs_platform_info *fpi;

cpm2_reset();

@@ -110,6 +177,28 @@ #endif
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}

+ init_fcc_ioports();
+ ppc_sys_device_remove(MPC85xx_CPM_FCC1);
+
+ fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2);
+ if (fpi) {
+ memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
+ fpi->bus_id = "0:02";
+ fpi->phy_addr = 2;
+ fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
+ fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1];
+ }
+
+ fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3);
+ if (fpi) {
+ memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
+ fpi->macaddr[5] += 1;
+ fpi->bus_id = "0:03";
+ fpi->phy_addr = 3;
+ fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
+ fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2];
+ }
+
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
index abf3228..c8c322f 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
@@ -45,4 +45,23 @@ #define MPC85XX_PCI1_MEM_OFFSET 0x000000

#define MPC85XX_PCI1_IO_SIZE 0x01000000

+/* FCC1 Clock Source Configuration. These can be
+ * redefined in the board specific file.
+ * Can only choose from CLK9-12 */
+#define F1_RXCLK 12
+#define F1_TXCLK 11
+
+/* FCC2 Clock Source Configuration. These can be
+ * redefined in the board specific file.
+ * Can only choose from CLK13-16 */
+#define F2_RXCLK 13
+#define F2_TXCLK 14
+
+/* FCC3 Clock Source Configuration. These can be
+ * redefined in the board specific file.
+ * Can only choose from CLK13-16 */
+#define F3_RXCLK 15
+#define F3_TXCLK 16
+
+
#endif /* __MACH_MPC85XX_ADS_H__ */
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
index abb7154..2a35fe2 100644
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ b/arch/ppc/platforms/mpc8272ads_setup.c
@@ -56,64 +56,51 @@ static struct fs_uart_platform_info mpc8
},
};

-static struct fs_mii_bus_info mii_bus_info = {
- .method = fsmii_bitbang,
- .id = 0,
- .i.bitbang = {
- .mdio_port = fsiop_portc,
- .mdio_bit = 18,
- .mdc_port = fsiop_portc,
- .mdc_bit = 19,
- .delay = 1,
- },
-};
-
-static struct fs_platform_info mpc82xx_fcc1_pdata = {
- .fs_no = fsid_fcc1,
- .cp_page = CPM_CR_FCC1_PAGE,
- .cp_block = CPM_CR_FCC1_SBLOCK,
- .clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
- .clk_route = CMX1_CLK_ROUTE,
- .clk_mask = CMX1_CLK_MASK,
- .init_ioports = init_fcc1_ioports,
-
- .phy_addr = 0,
-#ifdef PHY_INTERRUPT
- .phy_irq = PHY_INTERRUPT,
-#else
- .phy_irq = -1;
-#endif
- .mem_offset = FCC1_MEM_OFFSET,
- .bus_info = &mii_bus_info,
- .rx_ring = 32,
- .tx_ring = 32,
- .rx_copybreak = 240,
- .use_napi = 0,
- .napi_weight = 17,
+static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
+ .mdio_dat.bit = 18,
+ .mdio_dir.bit = 18,
+ .mdc_dat.bit = 19,
+ .delay = 1,
};

-static struct fs_platform_info mpc82xx_fcc2_pdata = {
- .fs_no = fsid_fcc2,
- .cp_page = CPM_CR_FCC2_PAGE,
- .cp_block = CPM_CR_FCC2_SBLOCK,
- .clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
- .clk_route = CMX2_CLK_ROUTE,
- .clk_mask = CMX2_CLK_MASK,
- .init_ioports = init_fcc2_ioports,
-
- .phy_addr = 3,
-#ifdef PHY_INTERRUPT
- .phy_irq = PHY_INTERRUPT,
-#else
- .phy_irq = -1;
-#endif
- .mem_offset = FCC2_MEM_OFFSET,
- .bus_info = &mii_bus_info,
- .rx_ring = 32,
- .tx_ring = 32,
- .rx_copybreak = 240,
- .use_napi = 0,
- .napi_weight = 17,
+static struct fs_platform_info mpc82xx_enet_pdata[] = {
+ [fsid_fcc1] = {
+ .fs_no = fsid_fcc1,
+ .cp_page = CPM_CR_FCC1_PAGE,
+ .cp_block = CPM_CR_FCC1_SBLOCK,
+
+ .clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
+ .clk_route = CMX1_CLK_ROUTE,
+ .clk_mask = CMX1_CLK_MASK,
+ .init_ioports = init_fcc1_ioports,
+
+ .mem_offset = FCC1_MEM_OFFSET,
+
+ .rx_ring = 32,
+ .tx_ring = 32,
+ .rx_copybreak = 240,
+ .use_napi = 0,
+ .napi_weight = 17,
+ .bus_id = "0:00",
+ },
+ [fsid_fcc2] = {
+ .fs_no = fsid_fcc2,
+ .cp_page = CPM_CR_FCC2_PAGE,
+ .cp_block = CPM_CR_FCC2_SBLOCK,
+ .clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
+ .clk_route = CMX2_CLK_ROUTE,
+ .clk_mask = CMX2_CLK_MASK,
+ .init_ioports = init_fcc2_ioports,
+
+ .mem_offset = FCC2_MEM_OFFSET,
+
+ .rx_ring = 32,
+ .tx_ring = 32,
+ .rx_copybreak = 240,
+ .use_napi = 0,
+ .napi_weight = 17,
+ .bus_id = "0:03",
+ },
};

static void init_fcc1_ioports(void)
@@ -209,20 +196,21 @@ static void __init mpc8272ads_fixup_enet
bd_t* bi = (void*)__res;
int fs_no = fsid_fcc1+pdev->id-1;

- mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase;
- mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c;
-
- switch(fs_no) {
- case fsid_fcc1:
- memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6);
- pdev->dev.platform_data = &mpc82xx_fcc1_pdata;
- break;
- case fsid_fcc2:
- memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6);
- mpc82xx_fcc2_pdata.macaddr[5] ^= 1;
- pdev->dev.platform_data = &mpc82xx_fcc2_pdata;
- break;
+ if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) {
+ return;
}
+
+ mpc82xx_enet_pdata[fs_no].dpram_offset=
+ (u32)cpm2_immr->im_dprambase;
+ mpc82xx_enet_pdata[fs_no].fcc_regs_c =
+ (u32)cpm2_immr->im_fcc_c;
+ memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
+
+ /* prevent dup mac */
+ if(fs_no == fsid_fcc2)
+ mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
+
+ pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
}

static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
@@ -274,6 +262,29 @@ static void init_scc4_uart_ioports(void)
iounmap(immap);
}

+static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
+ int idx)
+{
+ m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
+ m82xx_mii_bb_pdata.irq[1] = -1;
+ m82xx_mii_bb_pdata.irq[2] = -1;
+ m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
+ m82xx_mii_bb_pdata.irq[31] = -1;
+
+
+ m82xx_mii_bb_pdata.mdio_dat.offset =
+ (u32)&cpm2_immr->im_ioport.iop_pdatc;
+
+ m82xx_mii_bb_pdata.mdio_dir.offset =
+ (u32)&cpm2_immr->im_ioport.iop_pdirc;
+
+ m82xx_mii_bb_pdata.mdc_dat.offset =
+ (u32)&cpm2_immr->im_ioport.iop_pdatc;
+
+
+ pdev->dev.platform_data = &m82xx_mii_bb_pdata;
+}
+
static int mpc8272ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
@@ -286,6 +297,10 @@ static int mpc8272ads_platform_notify(st
.rtn = mpc8272ads_fixup_uart_pdata,
},
{
+ .bus_id = "fsl-bb-mdio",
+ .rtn = mpc8272ads_fixup_mdio_pdata,
+ },
+ {
.bus_id = NULL
}
};
@@ -319,6 +334,7 @@ #ifdef CONFIG_SERIAL_CPM_SCC4
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
#endif

+ ppc_sys_device_enable(MPC82xx_MDIO_BB);

return 0;
}
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
index f19b616..e12cece 100644
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -1,10 +1,10 @@
-/*arch/ppc/platforms/mpc885ads-setup.c
+/*arch/ppc/platforms/mpc866ads-setup.c
*
- * Platform setup for the Freescale mpc885ads board
+ * Platform setup for the Freescale mpc866ads board
*
* Vitaly Bordug <vbordug@xxxxxxxxxxxxx>
*
- * Copyright 2005 MontaVista Software Inc.
+ * Copyright 2005-2006 MontaVista Software Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -42,49 +42,36 @@ static void setup_scc1_ioports(void);
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);

-static struct fs_mii_bus_info fec_mii_bus_info = {
- .method = fsmii_fec,
- .id = 0,
-};
-
-static struct fs_mii_bus_info scc_mii_bus_info = {
- .method = fsmii_fixed,
- .id = 0,
- .i.fixed.speed = 10,
- .i.fixed.duplex = 0,
-};
+static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;

-static struct fs_platform_info mpc8xx_fec_pdata[] = {
- {
- .rx_ring = 128,
- .tx_ring = 16,
- .rx_copybreak = 240,
+static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;

- .use_napi = 1,
- .napi_weight = 17,
+static struct fs_platform_info mpc8xx_enet_pdata[] = {
+ [fsid_fec1] = {
+ .rx_ring = 128,
+ .tx_ring = 16,
+ .rx_copybreak = 240,

- .phy_addr = 15,
- .phy_irq = -1,
+ .use_napi = 1,
+ .napi_weight = 17,

- .use_rmii = 0,
+ .init_ioports = setup_fec1_ioports,

- .bus_info = &fec_mii_bus_info,
- }
-};
+ .bus_id = "0:0f",
+ .has_phy = 1,
+ },
+ [fsid_scc1] = {
+ .rx_ring = 64,
+ .tx_ring = 8,
+ .rx_copybreak = 240,
+ .use_napi = 1,
+ .napi_weight = 17,

-static struct fs_platform_info mpc8xx_scc_pdata = {
- .rx_ring = 64,
- .tx_ring = 8,
- .rx_copybreak = 240,

- .use_napi = 1,
- .napi_weight = 17,
-
- .phy_addr = -1,
- .phy_irq = -1,
-
- .bus_info = &scc_mii_bus_info,
+ .init_ioports = setup_scc1_ioports,

+ .bus_id = "fixed@100:1",
+ },
};

static struct fs_uart_platform_info mpc866_uart_pdata[] = {
@@ -207,63 +194,6 @@ static void setup_scc1_ioports(void)

}

-static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
-{
- struct fs_platform_info *fpi = pdev->dev.platform_data;
-
- volatile cpm8xx_t *cp;
- bd_t *bd = (bd_t *) __res;
- char *e;
- int i;
-
- /* Get pointer to Communication Processor */
- cp = cpmp;
- switch (fs_no) {
- case fsid_fec1:
- fpi = &mpc8xx_fec_pdata[0];
- fpi->init_ioports = &setup_fec1_ioports;
-
- break;
- case fsid_scc1:
- fpi = &mpc8xx_scc_pdata;
- fpi->init_ioports = &setup_scc1_ioports;
-
- break;
- default:
- printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
- return;
- }
-
- pdev->dev.platform_data = fpi;
- fpi->fs_no = fs_no;
-
- e = (unsigned char *)&bd->bi_enetaddr;
- for (i = 0; i < 6; i++)
- fpi->macaddr[i] = *e++;
-
- fpi->macaddr[5 - pdev->id]++;
-
-}
-
-static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
- int idx)
-{
- /* This is for FEC devices only */
- if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
- return;
- mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
-}
-
-static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
- int idx)
-{
- /* This is for SCC devices only */
- if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
- return;
-
- mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
-}
-
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
@@ -315,6 +245,56 @@ #endif

}

+static int ma_count = 0;
+
+static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
+{
+ struct fs_platform_info *fpi;
+
+ volatile cpm8xx_t *cp;
+ bd_t *bd = (bd_t *) __res;
+ char *e;
+ int i;
+
+ /* Get pointer to Communication Processor */
+ cp = cpmp;
+
+ if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) {
+ printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
+ return;
+ }
+
+
+ fpi = &mpc8xx_enet_pdata[fs_no];
+ fpi->fs_no = fs_no;
+ pdev->dev.platform_data = fpi;
+
+ e = (unsigned char *)&bd->bi_enetaddr;
+ for (i = 0; i < 6; i++)
+ fpi->macaddr[i] = *e++;
+
+ fpi->macaddr[5] += ma_count++;
+}
+
+static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
+ int idx)
+{
+ /* This is for FEC devices only */
+ if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
+ return;
+ mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
+}
+
+static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
+ int idx)
+{
+ /* This is for SCC devices only */
+ if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
+ return;
+
+ mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
+}
+
static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
@@ -359,6 +339,9 @@ static int mpc866ads_platform_notify(str

int __init mpc866ads_init(void)
{
+ bd_t *bd = (bd_t *) __res;
+ struct fs_mii_fec_platform_info* fmpi;
+
printk(KERN_NOTICE "mpc866ads: Init\n");

platform_notify = mpc866ads_platform_notify;
@@ -366,11 +349,20 @@ int __init mpc866ads_init(void)
ppc_sys_device_initfunc();
ppc_sys_device_disable_all();

-#ifdef MPC8xx_SECOND_ETH_SCC1
+#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1
ppc_sys_device_enable(MPC8xx_CPM_SCC1);
#endif
ppc_sys_device_enable(MPC8xx_CPM_FEC1);

+ ppc_sys_device_enable(MPC8xx_MDIO_FEC);
+
+ fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
+ &mpc8xx_mdio_fec_pdata;
+
+ fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
+ /* No PHY interrupt line here */
+ fmpi->irq[0xf] = -1;
+
/* Since either of the uarts could be used as console, they need to ready */
#ifdef CONFIG_SERIAL_CPM_SMC1
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
@@ -381,6 +373,14 @@ #ifdef CONFIG_SERIAL_CPM_SMC
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
+ ppc_sys_device_enable(MPC8xx_MDIO_FEC);
+
+ fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
+ &mpc8xx_mdio_fec_pdata;
+
+ fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
+ /* No PHY interrupt line here */
+ fmpi->irq[0xf] = -1;

return 0;
}
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
index c1fc4a1..5dfa4e6 100644
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -38,7 +38,10 @@ extern unsigned char __res[];
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);

-static void __init mpc885ads_scc_phy_init(char);
+static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
+static void setup_fec1_ioports(void);
+static void setup_fec2_ioports(void);
+static void setup_scc3_ioports(void);

static struct fs_uart_platform_info mpc885_uart_pdata[] = {
[fsid_smc1_uart] = {
@@ -61,23 +64,8 @@ static struct fs_uart_platform_info mpc8
},
};

-static struct fs_mii_bus_info fec_mii_bus_info = {
- .method = fsmii_fec,
- .id = 0,
-};
-
-static struct fs_mii_bus_info scc_mii_bus_info = {
-#ifdef CONFIG_SCC_ENET_8xx_FIXED
- .method = fsmii_fixed,
-#else
- .method = fsmii_fec,
-#endif
-
- .id = 0,
-};
-
-static struct fs_platform_info mpc8xx_fec_pdata[] = {
- {
+static struct fs_platform_info mpc8xx_enet_pdata[] = {
+ [fsid_fec1] = {
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
@@ -85,11 +73,12 @@ static struct fs_platform_info mpc8xx_fe
.use_napi = 1,
.napi_weight = 17,

- .phy_addr = 0,
- .phy_irq = SIU_IRQ7,
+ .init_ioports = setup_fec1_ioports,

- .bus_info = &fec_mii_bus_info,
- }, {
+ .bus_id = "0:00",
+ .has_phy = 1,
+ },
+ [fsid_fec2] = {
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
@@ -97,35 +86,32 @@ static struct fs_platform_info mpc8xx_fe
.use_napi = 1,
.napi_weight = 17,

- .phy_addr = 1,
- .phy_irq = SIU_IRQ7,
-
- .bus_info = &fec_mii_bus_info,
- }
-};
+ .init_ioports = setup_fec2_ioports,

-static struct fs_platform_info mpc8xx_scc_pdata = {
- .rx_ring = 64,
- .tx_ring = 8,
- .rx_copybreak = 240,
+ .bus_id = "0:01",
+ .has_phy = 1,
+ },
+ [fsid_scc3] = {
+ .rx_ring = 64,
+ .tx_ring = 8,
+ .rx_copybreak = 240,

- .use_napi = 1,
- .napi_weight = 17,
+ .use_napi = 1,
+ .napi_weight = 17,

- .phy_addr = 2,
-#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED
- .phy_irq = -1,
+ .init_ioports = setup_scc3_ioports,
+#ifdef CONFIG_FIXED_MII_10_FDX
+ .bus_id = "fixed@100:1",
#else
- .phy_irq = SIU_IRQ7,
-#endif
-
- .bus_info = &scc_mii_bus_info,
+ .bus_id = "0:02",
+ #endif
+ },
};

void __init board_init(void)
{
- volatile cpm8xx_t *cp = cpmp;
- unsigned int *bcsr_io;
+ cpm8xx_t *cp = cpmp;
+ unsigned int *bcsr_io;

#ifdef CONFIG_FS_ENET
immap_t *immap = (immap_t *) IMAP_ADDR;
@@ -164,6 +150,14 @@ #ifdef CONFIG_FS_ENET
/* use MDC for MII (common) */
setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
+ bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
+ clrbits32(bcsr_io,BCSR5_MII1_EN);
+ clrbits32(bcsr_io,BCSR5_MII1_RST);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ clrbits32(bcsr_io,BCSR5_MII2_EN);
+ clrbits32(bcsr_io,BCSR5_MII2_RST);
+#endif
+ iounmap(bcsr_io);
#endif
}

@@ -194,8 +188,8 @@ static void setup_fec2_ioports(void)
/* configure FEC2 pins */
setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
- setbits32(&immap->im_cpm.cp_peso, 0x00037800);
clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
+ setbits32(&immap->im_cpm.cp_peso, 0x00037800);
clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
}

@@ -213,6 +207,8 @@ static void setup_scc3_ioports(void)

/* Enable the PHY.
*/
+ clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
+ udelay(1000);
setbits32(bcsr_io+4, BCSR4_ETH10_RST);
/* Configure port A pins for Txd and Rxd.
*/
@@ -254,37 +250,38 @@ static void setup_scc3_ioports(void)
clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);

- setbits32(bcsr_io+1, BCSR1_ETHEN);
+ setbits32(bcsr_io+4, BCSR1_ETHEN);
iounmap(bcsr_io);
}

+static int mac_count = 0;
+
static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
{
- struct fs_platform_info *fpi = pdev->dev.platform_data;
-
- volatile cpm8xx_t *cp;
+ struct fs_platform_info *fpi;
bd_t *bd = (bd_t *) __res;
char *e;
int i;

- /* Get pointer to Communication Processor */
- cp = cpmp;
+ if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) {
+ printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
+ return;
+ }
+
+ fpi = &mpc8xx_enet_pdata[fs_no];
+
switch (fs_no) {
case fsid_fec1:
- fpi = &mpc8xx_fec_pdata[0];
fpi->init_ioports = &setup_fec1_ioports;
break;
case fsid_fec2:
- fpi = &mpc8xx_fec_pdata[1];
fpi->init_ioports = &setup_fec2_ioports;
break;
case fsid_scc3:
- fpi = &mpc8xx_scc_pdata;
fpi->init_ioports = &setup_scc3_ioports;
- mpc885ads_scc_phy_init(fpi->phy_addr);
break;
default:
- printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
+ printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
return;
}

@@ -295,7 +292,7 @@ static void mpc885ads_fixup_enet_pdata(s
for (i = 0; i < 6; i++)
fpi->macaddr[i] = *e++;

- fpi->macaddr[5 - pdev->id]++;
+ fpi->macaddr[5] += mac_count++;

}

@@ -318,58 +315,6 @@ static void __init mpc885ads_fixup_scc_e
mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}

-/* SCC ethernet controller does not have MII management channel. FEC1 MII
- * channel is used to communicate with the 10Mbit PHY.
- */
-
-#define MII_ECNTRL_PINMUX 0x4
-#define FEC_ECNTRL_PINMUX 0x00000004
-#define FEC_RCNTRL_MII_MODE 0x00000004
-
-/* Make MII read/write commands.
- */
-#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \
- ((VAL) & 0xffff) | ((PHY_ADDR) << 23))
-
-static void mpc885ads_scc_phy_init(char phy_addr)
-{
- volatile immap_t *immap;
- volatile fec_t *fecp;
- bd_t *bd;
-
- bd = (bd_t *) __res;
- immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */
- fecp = &(immap->im_cpm.cp_fec);
-
- /* Enable MII pins of the FEC1
- */
- setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
- clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
- /* Set MII speed to 2.5 MHz
- */
- out_be32(&fecp->fec_mii_speed,
- ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1);
-
- /* Enable FEC pin MUX
- */
- setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
- setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
-
- out_be32(&fecp->fec_mii_data,
- mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr));
- udelay(100);
- out_be32(&fecp->fec_mii_data,
- mk_mii_write(MII_ADVERTISE,
- ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr));
- udelay(100);
-
- /* Disable FEC MII settings
- */
- clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
- clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
- out_be32(&fecp->fec_mii_speed, 0);
-}
-
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
@@ -462,6 +407,9 @@ static int mpc885ads_platform_notify(str

int __init mpc885ads_init(void)
{
+ struct fs_mii_fec_platform_info* fmpi;
+ bd_t *bd = (bd_t *) __res;
+
printk(KERN_NOTICE "mpc885ads: Init\n");

platform_notify = mpc885ads_platform_notify;
@@ -471,8 +419,17 @@ int __init mpc885ads_init(void)

ppc_sys_device_enable(MPC8xx_CPM_FEC1);

+ ppc_sys_device_enable(MPC8xx_MDIO_FEC);
+ fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
+ &mpc8xx_mdio_fec_pdata;
+
+ fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
+
+ /* No PHY interrupt line here */
+ fmpi->irq[0xf] = SIU_IRQ7;
+
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
- ppc_sys_device_enable(MPC8xx_CPM_SCC1);
+ ppc_sys_device_enable(MPC8xx_CPM_SCC3);

#endif
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h
index 8f14a43..672483d 100644
--- a/arch/ppc/platforms/pq2ads_pd.h
+++ b/arch/ppc/platforms/pq2ads_pd.h
@@ -29,86 +29,4 @@ #define F2_TXCLK 16
#define F3_RXCLK 13
#define F3_TXCLK 14

-/* Automatically generates register configurations */
-#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK ((uint)0xff000000)
-
-#define PC_F2RXCLK PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK ((uint)0x00ff0000)
-
-#define PC_F3RXCLK PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK ((uint)0x0000ff00)
-
-/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL 0x00000001U
-#define PA1_CRS 0x00000002U
-#define PA1_TXER 0x00000004U
-#define PA1_TXEN 0x00000008U
-#define PA1_RXDV 0x00000010U
-#define PA1_RXER 0x00000020U
-#define PA1_TXDAT 0x00003c00U
-#define PA1_RXDAT 0x0003c000U
-#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
- PA1_RXDV | PA1_RXER)
-#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER 0x00000001U
-#define PB2_RXDV 0x00000002U
-#define PB2_TXEN 0x00000004U
-#define PB2_RXER 0x00000008U
-#define PB2_COL 0x00000010U
-#define PB2_CRS 0x00000020U
-#define PB2_TXDAT 0x000003c0U
-#define PB2_RXDAT 0x00003c00U
-#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
- PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB1 (PB2_TXEN)
-#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV 0x00004000U
-#define PB3_RXER 0x00008000U
-#define PB3_TXER 0x00010000U
-#define PB3_TXEN 0x00020000U
-#define PB3_COL 0x00040000U
-#define PB3_CRS 0x00080000U
-#define PB3_TXDAT 0x0f000000U
-#define PB3_RXDAT 0x00f00000U
-#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
- PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB1 0
-#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER)
-
-#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
-#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
-#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
-
#endif
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
index 7735336..325136e 100644
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ b/arch/ppc/syslib/mpc85xx_devices.c
@@ -16,9 +16,11 @@ #include <linux/module.h>
#include <linux/device.h>
#include <linux/serial_8250.h>
#include <linux/fsl_devices.h>
+#include <linux/fs_enet_pd.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/ppc_sys.h>
+#include <asm/cpm2.h>

/* We use offsets for IORESOURCE_MEM since we do not know at compile time
* what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
@@ -82,6 +84,60 @@ static struct fsl_i2c_platform_data mpc8
.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
};

+static struct fs_platform_info mpc85xx_fcc1_pdata = {
+ .fs_no = fsid_fcc1,
+ .cp_page = CPM_CR_FCC1_PAGE,
+ .cp_block = CPM_CR_FCC1_SBLOCK,
+
+ .rx_ring = 32,
+ .tx_ring = 32,
+ .rx_copybreak = 240,
+ .use_napi = 0,
+ .napi_weight = 17,
+
+ .clk_mask = CMX1_CLK_MASK,
+ .clk_route = CMX1_CLK_ROUTE,
+ .clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
+
+ .mem_offset = FCC1_MEM_OFFSET,
+};
+
+static struct fs_platform_info mpc85xx_fcc2_pdata = {
+ .fs_no = fsid_fcc2,
+ .cp_page = CPM_CR_FCC2_PAGE,
+ .cp_block = CPM_CR_FCC2_SBLOCK,
+
+ .rx_ring = 32,
+ .tx_ring = 32,
+ .rx_copybreak = 240,
+ .use_napi = 0,
+ .napi_weight = 17,
+
+ .clk_mask = CMX2_CLK_MASK,
+ .clk_route = CMX2_CLK_ROUTE,
+ .clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
+
+ .mem_offset = FCC2_MEM_OFFSET,
+};
+
+static struct fs_platform_info mpc85xx_fcc3_pdata = {
+ .fs_no = fsid_fcc3,
+ .cp_page = CPM_CR_FCC3_PAGE,
+ .cp_block = CPM_CR_FCC3_SBLOCK,
+
+ .rx_ring = 32,
+ .tx_ring = 32,
+ .rx_copybreak = 240,
+ .use_napi = 0,
+ .napi_weight = 17,
+
+ .clk_mask = CMX3_CLK_MASK,
+ .clk_route = CMX3_CLK_ROUTE,
+ .clk_trx = (PC_F3RXCLK | PC_F3TXCLK),
+
+ .mem_offset = FCC3_MEM_OFFSET,
+};
+
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = 0x4500,
@@ -318,19 +374,28 @@ struct platform_device ppc_sys_platform_
[MPC85xx_CPM_FCC1] = {
.name = "fsl-cpm-fcc",
.id = 1,
- .num_resources = 3,
+ .num_resources = 4,
+ .dev.platform_data = &mpc85xx_fcc1_pdata,
.resource = (struct resource[]) {
{
+ .name = "fcc_regs",
.start = 0x91300,
.end = 0x9131F,
.flags = IORESOURCE_MEM,
},
{
+ .name = "fcc_regs_c",
.start = 0x91380,
.end = 0x9139F,
.flags = IORESOURCE_MEM,
},
{
+ .name = "fcc_pram",
+ .start = 0x88400,
+ .end = 0x884ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
.start = SIU_INT_FCC1,
.end = SIU_INT_FCC1,
.flags = IORESOURCE_IRQ,
@@ -340,19 +405,28 @@ struct platform_device ppc_sys_platform_
[MPC85xx_CPM_FCC2] = {
.name = "fsl-cpm-fcc",
.id = 2,
- .num_resources = 3,
+ .num_resources = 4,
+ .dev.platform_data = &mpc85xx_fcc2_pdata,
.resource = (struct resource[]) {
{
+ .name = "fcc_regs",
.start = 0x91320,
.end = 0x9133F,
.flags = IORESOURCE_MEM,
},
{
+ .name = "fcc_regs_c",
.start = 0x913A0,
.end = 0x913CF,
.flags = IORESOURCE_MEM,
},
{
+ .name = "fcc_pram",
+ .start = 0x88500,
+ .end = 0x885ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
.start = SIU_INT_FCC2,
.end = SIU_INT_FCC2,
.flags = IORESOURCE_IRQ,
@@ -362,19 +436,28 @@ struct platform_device ppc_sys_platform_
[MPC85xx_CPM_FCC3] = {
.name = "fsl-cpm-fcc",
.id = 3,
- .num_resources = 3,
+ .num_resources = 4,
+ .dev.platform_data = &mpc85xx_fcc3_pdata,
.resource = (struct resource[]) {
{
+ .name = "fcc_regs",
.start = 0x91340,
.end = 0x9135F,
.flags = IORESOURCE_MEM,
},
{
+ .name = "fcc_regs_c",
.start = 0x913D0,
.end = 0x913FF,
.flags = IORESOURCE_MEM,
},
{
+ .name = "fcc_pram",
+ .start = 0x88600,
+ .end = 0x886ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
.start = SIU_INT_FCC3,
.end = SIU_INT_FCC3,
.flags = IORESOURCE_IRQ,
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
index 6f53638..cf5ab47 100644
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ b/arch/ppc/syslib/mpc8xx_devices.c
@@ -218,6 +218,14 @@ struct platform_device ppc_sys_platform_
},
},
},
+
+ [MPC8xx_MDIO_FEC] = {
+ .name = "fsl-cpm-fec-mdio",
+ .id = 0,
+ .num_resources = 0,
+
+ },
+
};

static int __init mach_mpc8xx_fixup(struct platform_device *pdev)
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
index eee2132..18ba1d7 100644
--- a/arch/ppc/syslib/mpc8xx_sys.c
+++ b/arch/ppc/syslib/mpc8xx_sys.c
@@ -22,7 +22,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "MPC86X",
.mask = 0xFFFFFFFF,
.value = 0x00000000,
- .num_devices = 7,
+ .num_devices = 8,
.device_list = (enum ppc_sys_devices[])
{
MPC8xx_CPM_FEC1,
@@ -32,13 +32,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC8xx_CPM_SCC4,
MPC8xx_CPM_SMC1,
MPC8xx_CPM_SMC2,
+ MPC8xx_MDIO_FEC,
},
},
{
.ppc_sys_name = "MPC885",
.mask = 0xFFFFFFFF,
.value = 0x00000000,
- .num_devices = 8,
+ .num_devices = 9,
.device_list = (enum ppc_sys_devices[])
{
MPC8xx_CPM_FEC1,
@@ -49,6 +50,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC8xx_CPM_SCC4,
MPC8xx_CPM_SMC1,
MPC8xx_CPM_SMC2,
+ MPC8xx_MDIO_FEC,
},
},
{ /* default match */
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
index 8692d00..fefbc21 100644
--- a/arch/ppc/syslib/pq2_devices.c
+++ b/arch/ppc/syslib/pq2_devices.c
@@ -369,6 +369,11 @@ struct platform_device ppc_sys_platform_
},
},
},
+ [MPC82xx_MDIO_BB] = {
+ .name = "fsl-bb-mdio",
+ .id = 0,
+ .num_resources = 0,
+ },
};

static int __init mach_mpc82xx_fixup(struct platform_device *pdev)
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
index fee8948..f52600c 100644
--- a/arch/ppc/syslib/pq2_sys.c
+++ b/arch/ppc/syslib/pq2_sys.c
@@ -139,13 +139,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8272",
.mask = 0x0000ff00,
.value = 0x00000c00,
- .num_devices = 12,
+ .num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
+ MPC82xx_MDIO_BB,
},
},
/* below is a list of the 8280 family of processors */
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index c70344b..f6a7ff0 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -1093,5 +1093,100 @@ #endif

#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */

+/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
+ * in order to use clock-computing stuff below for the FCC x
+ */
+
+/* Automatically generates register configurations */
+#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
+
+#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
+#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
+#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
+#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
+#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
+#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
+
+#define PC_F1RXCLK PC_CLK(F1_RXCLK)
+#define PC_F1TXCLK PC_CLK(F1_TXCLK)
+#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
+#define CMX1_CLK_MASK ((uint)0xff000000)
+
+#define PC_F2RXCLK PC_CLK(F2_RXCLK)
+#define PC_F2TXCLK PC_CLK(F2_TXCLK)
+#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
+#define CMX2_CLK_MASK ((uint)0x00ff0000)
+
+#define PC_F3RXCLK PC_CLK(F3_RXCLK)
+#define PC_F3TXCLK PC_CLK(F3_TXCLK)
+#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
+#define CMX3_CLK_MASK ((uint)0x0000ff00)
+
+#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
+#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
+
+#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
+
+/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PA1_COL 0x00000001U
+#define PA1_CRS 0x00000002U
+#define PA1_TXER 0x00000004U
+#define PA1_TXEN 0x00000008U
+#define PA1_RXDV 0x00000010U
+#define PA1_RXER 0x00000020U
+#define PA1_TXDAT 0x00003c00U
+#define PA1_RXDAT 0x0003c000U
+#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT)
+#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
+ PA1_RXDV | PA1_RXER)
+#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
+#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER)
+
+
+/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB2_TXER 0x00000001U
+#define PB2_RXDV 0x00000002U
+#define PB2_TXEN 0x00000004U
+#define PB2_RXER 0x00000008U
+#define PB2_COL 0x00000010U
+#define PB2_CRS 0x00000020U
+#define PB2_TXDAT 0x000003c0U
+#define PB2_RXDAT 0x00003c00U
+#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
+ PB2_RXER | PB2_RXDV | PB2_TXER)
+#define PB2_PSORB1 (PB2_TXEN)
+#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
+#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER)
+
+
+/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB3_RXDV 0x00004000U
+#define PB3_RXER 0x00008000U
+#define PB3_TXER 0x00010000U
+#define PB3_TXEN 0x00020000U
+#define PB3_COL 0x00040000U
+#define PB3_CRS 0x00080000U
+#define PB3_TXDAT 0x0f000000U
+#define PC3_TXDAT 0x00000010U
+#define PB3_RXDAT 0x00f00000U
+#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
+ PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
+#define PB3_PSORB1 0
+#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
+#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER)
+#define PC3_DIRC1 (PC3_TXDAT)
+
+/* Handy macro to specify mem for FCCs*/
+#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
+#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2)
+
#endif /* __CPM2__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
index 4b93481..23579d4 100644
--- a/include/asm-ppc/mpc8260.h
+++ b/include/asm-ppc/mpc8260.h
@@ -82,6 +82,7 @@ enum ppc_sys_devices {
MPC82xx_CPM_SMC2,
MPC82xx_CPM_USB,
MPC82xx_SEC1,
+ MPC82xx_MDIO_BB,
NUM_PPC_SYS_DEVS,
};

diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
index adcce33..d3a2f2f 100644
--- a/include/asm-ppc/mpc8xx.h
+++ b/include/asm-ppc/mpc8xx.h
@@ -110,6 +110,7 @@ enum ppc_sys_devices {
MPC8xx_CPM_SMC1,
MPC8xx_CPM_SMC2,
MPC8xx_CPM_USB,
+ MPC8xx_MDIO_FEC,
NUM_PPC_SYS_DEVS,
};

diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 783c476..74ed35a 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -69,34 +69,21 @@ enum fs_ioport {
fsiop_porte,
};

-struct fs_mii_bus_info {
- int method; /* mii method */
- int id; /* the id of the mii_bus */
- int disable_aneg; /* if the controller needs to negothiate speed & duplex */
- int lpa; /* the default board-specific vallues will be applied otherwise */
-
- union {
- struct {
- int duplex;
- int speed;
- } fixed;
-
- struct {
- /* nothing */
- } fec;
-
- struct {
- /* nothing */
- } scc;
-
- struct {
- int mdio_port; /* port & bit for MDIO */
- int mdio_bit;
- int mdc_port; /* port & bit for MDC */
- int mdc_bit;
- int delay; /* delay in us */
- } bitbang;
- } i;
+struct fs_mii_bit {
+ u32 offset;
+ u8 bit;
+ u8 polarity;
+};
+struct fs_mii_bb_platform_info {
+ struct fs_mii_bit mdio_dir;
+ struct fs_mii_bit mdio_dat;
+ struct fs_mii_bit mdc_dat;
+ int mdio_port; /* port & bit for MDIO */
+ int mdio_bit;
+ int mdc_port; /* port & bit for MDC */
+ int mdc_bit;
+ int delay; /* delay in us */
+ int irq[32]; /* irqs per phy's */
};

struct fs_platform_info {
@@ -119,6 +106,7 @@ struct fs_platform_info {
u32 device_flags;

int phy_addr; /* the phy address (-1 no phy) */
+ const char* bus_id;
int phy_irq; /* the phy irq (if it exists) */

const struct fs_mii_bus_info *bus_info;
@@ -130,6 +118,10 @@ struct fs_platform_info {
int napi_weight; /* NAPI weight */

int use_rmii; /* use RMII mode */
+ int has_phy; /* if the network is phy container as well...*/
+};
+struct fs_mii_fec_platform_info {
+ u32 irq[32];
+ u32 mii_speed;
};
-
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/