swsusp regression [Was: 2.6.18-rc3-mm2]
From: Jiri Slaby
Date: Mon Aug 07 2006 - 05:26:25 EST
Andrew Morton wrote:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc3/2.6.18-rc3-mm2/
I tried it and guess what :)... swsusp doesn't work :@.
This time I was able to dump process states with sysrq-t:
http://www.fi.muni.cz/~xslaby/sklad/ide2.gif
My guess is ide2/2.0 dies (hpt370 driver), since last thing kernel prints is
suspending device 2.0
diff of dmesgs:
--- rc2 2006-08-07 11:13:34.000000000 +0200
+++ rc3 2006-08-07 11:13:39.000000000 +0200
@@ -1,4 +1,4 @@
-Linux version 2.6.18-rc2-mm1 (ku@bellona) (gcc version 4.1.1 20060721 (Red Hat
4.1.1-13)) #155 SMP Tue Aug 1 01:17:45 CEST 2006
+Linux version 2.6.18-rc3-mm2 (ku@bellona) (gcc version 4.1.1 20060802 (Red Hat
4.1.1-14)) #157 SMP Sun Aug 6 19:38:53 CEST 2006
BIOS-provided physical RAM map:
sanitize start
sanitize end
@@ -49,7 +49,7 @@
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
-Detected 2736.278 MHz processor.
+Detected 2736.289 MHz processor.
Built 1 zonelists. Total pages: 262128
Kernel command line: ro root=/dev/hda2 reboot=w vga=1 2
mapped APIC to ffffd000 (fee00000)
@@ -57,14 +57,22 @@
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
-CPU 0 irqstacks, hard=c0505000 soft=c0502000
+CPU 0 irqstacks, hard=c0509000 soft=c0506000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x50
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1034488k/1048512k available (2514k kernel code, 13456k reserved, 1349k
data, 200k init, 131008k highmem)
+Memory: 1034472k/1048512k available (2522k kernel code, 13472k reserved, 1353k
data, 204k init, 131008k highmem)
+virtual kernel memory layout:
+ fixmap : 0xfff90000 - 0xfffff000 ( 444 kB)
+ pkmap : 0xff800000 - 0xffc00000 (4096 kB)
+ vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
+ lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
+ .init : 0xc04ce000 - 0xc0501000 ( 204 kB)
+ .data : 0xc03768d2 - 0xc04c8ff8 (1353 kB)
+ .text : 0xc0100000 - 0xc03768d2 (2522 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay using timer specific routine.. 5476.47 BogoMIPS (lpj=10952942)
+Calibrating delay using timer specific routine.. 5476.48 BogoMIPS (lpj=10952969)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
@@ -82,9 +90,9 @@
CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
-CPU 1 irqstacks, hard=c0506000 soft=c0503000
+CPU 1 irqstacks, hard=c050a000 soft=c0507000
Initializing CPU#1
-Calibrating delay using timer specific routine.. 5472.77 BogoMIPS (lpj=10945546)
+Calibrating delay using timer specific routine.. 5472.79 BogoMIPS (lpj=10945581)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
@@ -96,15 +104,15 @@
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
-Total of 2 processors activated (10949.24 BogoMIPS).
+Total of 2 processors activated (10949.27 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
-migration_cost=111
+migration_cost=1
NET: Registered protocol family 16
ACPI: bus type pci registered
-PCI: PCI BIOS revision 2.10 entry at 0xfb670, last bus=2
+PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
@@ -189,7 +197,7 @@
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 19
HPT370: chipset revision 3
HPT370: no clock data saved by BIOS
-HPT370: DPLL base: 48 MHz, f_CNT: 146, assuming 33 MHz PCI
+HPT370: DPLL base: 48 MHz, f_CNT: 148, assuming 33 MHz PCI
HPT370: using 33 MHz PCI clock
HPT370: 100% native mode on irq 19
ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:DMA, hdf:pio
@@ -243,7 +251,7 @@
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
-usb usb1: Manufacturer: Linux 2.6.18-rc2-mm1 ehci_hcd
+usb usb1: Manufacturer: Linux 2.6.18-rc3-mm2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
@@ -257,7 +265,7 @@
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
-usb usb2: Manufacturer: Linux 2.6.18-rc2-mm1 uhci_hcd
+usb usb2: Manufacturer: Linux 2.6.18-rc3-mm2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
@@ -270,7 +278,7 @@
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
-usb usb3: Manufacturer: Linux 2.6.18-rc2-mm1 uhci_hcd
+usb usb3: Manufacturer: Linux 2.6.18-rc3-mm2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
@@ -283,7 +291,7 @@
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
-usb usb4: Manufacturer: Linux 2.6.18-rc2-mm1 uhci_hcd
+usb usb4: Manufacturer: Linux 2.6.18-rc3-mm2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
@@ -296,7 +304,7 @@
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
-usb usb5: Manufacturer: Linux 2.6.18-rc2-mm1 uhci_hcd
+usb usb5: Manufacturer: Linux 2.6.18-rc3-mm2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
@@ -312,8 +320,8 @@
input: Wacom Graphire2 4x5 as /class/input/input0
usbcore: registered new interface driver wacom
/l/latest/xxx/drivers/usb/input/wacom.c: v1.45:USB Wacom Graphire and Wacom
Intuos tablet driver
-serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
+serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
it87: Found IT8712F chip at 0x290, revision 5
md: raid0 personality registered for level 0
@@ -325,6 +333,7 @@
No soundcards found.
oprofile: using NMI interrupt.
ip_conntrack version 2.4 (8191 buckets, 65528 max) - 208 bytes per conntrack
+input: AT Translated Set 2 keyboard as /class/input/input1
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
NET: Registered protocol family 1
@@ -336,13 +345,15 @@
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
+EXT3-fs: INFO: recovery required on readonly filesystem.
+EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
+EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
-Freeing unused kernel memory: 200k freed
-input: AT Translated Set 2 keyboard as /class/input/input1
+Freeing unused kernel memory: 204k freed
ieee1394: Initialized config rom entry `ip1394'
-hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
+hdc: ATAPI CD-ROM drive, 0kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 19
@@ -387,3 +398,5 @@
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 506036k swap on /dev/hda3. Priority:-1 extents:1 across:506036k
+JBD: barrier-based sync failed on hda2 - disabling barriers
+JBD: barrier-based sync failed on md0 - disabling barriers
regards,
--
<a href="http://www.fi.muni.cz/~xslaby/";>Jiri Slaby</a>
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/